Laminating metals questions
-
This is something I have been pondering for a while.
Now imagine this bit of steel, 3mm thick but it looks pretty dull, It's not a knife blade, it's almost a scale but not quite.
Anyway it has to be very very tough, I drop tools on concrete lets say...I fancy laminating two titanium sheets at 1mm, with a Damascus inner layer at 1mm also...Skeletonising it you can see where this is going I am sure...damascus showing through where i drill and cut...
I know resin probably would hold it if contacting surfaces were sanded to what 400 grit?
But I want to try to make my own mosaic pins too, problem is, there will be no space for anything more than 2mm thick.
The thinnest mosaic pins I have seen is 3.2mmI could maybe squeeze in 2.5mm but thats as big as I will be able to risk.
I had the idea of using a 2-2.5mm fine steel tube filling it with resin then squeezing in 7 needles and trimming off.
Would that work?
I have no idea where to even start looking for steel tubes that thin in a good steel.
Is it important to use high grade materials for the sheath of mosaic pins?Also how many of these do you think I should use?
Honestly I have never tried anything like this and not sure how these actually hold in place other than pure friction and perhaps a smidgen of epoxy, when I say resin btw, I mean epoxy stuff...Friction is probably fine for larger knife handle slabs where there is more than 10mm of contact, but on 3mm scales for durable tough use?
-
Sidenote: Make sure that the different metals you use for laminating expand equally with temperature (same coefficients), otherwise the whole thing may warp and bend. (Think bimetallic strip).
-
I had not even thought of that.
How would I find out this?
My plan was to use 6a4tlv titanium, Is that the right name...
And a dark visually speaking Damascus, which I have been unable to find from damascus suppliers, so I would have to have it made. -
Good luck! Joining two pieces of different metals is going to be tricky to say the least. My only option would be to use pins through the entire tool. Hard pins at that. If you did that then maybe some sort of bonding agent could be used to hold them together.
-
Just go solid damascus, that would look sweet skeletonized anyhow. And its steel, not soft alumimun etc, its going to be pretty durable.
Btw, I admire your enthusiasm! Tough when you have more ideas than you do time! Well thats how I feel usually anyhow :D
-
http://en.wikipedia.org/wiki/Eutectic_bonding
Eutectic bonding is the way to go. Would make awesome blade material too if it had a damascus center.mokume making
Stainless damascus and titanium will bond well. You basically polish the surfaces of the metal on a glass or flat granite tile with silicon carbide paper until it's clean and shiny and flat. Then you clamp them together like in the video and heat them to about 50 F lower than the melting temp of your lowest melting temp metal. If they are very clean and polished that means almost no oxygen is between the pieces so instead of oxidizing the metals react with each other exchanging ions and electrons and positrons and whatever and they bond forming a very thin layer of an alloy of both metals. It's neat stuff if you can make it work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login