Kydex
-
I've had one in the past and they are a very good alround usefull knife . Makes a great edc but its only downside is it looks a bit scary and like you said ignorant Pc's may take a dim view :( Must say I'm not bothered about that , cross that bridge if I ever get to it ;)
The big thing is he makes them for Swisstools too :D
Horizontal carry ;)Dunc
-
@dunc5 said:
I've had one in the past and they are a very good alround usefull knife . Makes a great edc but its only downside is it looks a bit scary and like you said ignorant Pc's may take a dim view :( Must say I'm not bothered about that , cross that bridge if I ever get to it ;)The big thing is he makes them for Swisstools too :D
Horizontal carry ;)Dunc
Horizontal carry eh
, add it to the list -
I like kydex, it has it's place IMO. For a good pocket carry or a neck knife, for a nice secure,
safe fit in your bag and for a leg/arm/back set-up it really does the job.
and you can get it in so many colors:

these were done by a good friend, who is my main sheath maker. Rainwalker Creations -
I'd love to gey my hands on a UKPK.
Can't find them for a decent price though.I like the look of kydex, and although I've had no experience of it, I would like to at some point in the near future.
-
Kydex is pretty cool stuff. I can see its usefulness to secure items in many weird positions. It's also used in the medical field for body casts and other uses. That's a nice little sheath you got there for the Spyderco, Dunc! :)
I dabbled a little with Kydex before for drumstick holders to attach around my drumset. When I need a drumstick, especially mid-song on stage, it's easier to grab where I have them mounted to my stands than to look/reach down to my stickbag. My first knife/tool Kydex endeavor will be a belt sheath for my new Benchmade Activator. It came with a Kydex neck sheath but I'd like to have a belt sheath for work. I'll get around to that Saturday and I can't wait!
-
I like Kydex for knives, be it folder or fixed blade.
Multis just seem wrong for Kydex, the plastic-ness doesn't seem to match up with the overall steel construction of any given tool. They need to be pampered with leather or nylon.
-
If you have a Crunch, send me a PM and I may be able to change your mind! :D
Def
-
@micky d said:
I love kydex, while it's nowhere near as good looking as leather, it is way tougher and more practical :)Actually I think Kydex is better looking than leather, but I don't think a Kydex sheath is as tough as a good quality leather sheath. (Low quality leather makes for about the worst possible sheath.)
Good quality leather - if oiled occasionally to prevent it drying out and cracking - is amazingly tough and will last for many years of use. Kydex will wear much faster than good leather.
Even brand new Kydex, if exposed to very cold temps, may crack completely through. Leather will be unaffected by the same temps.
.
-
Thats very true mate, my main problem with leather on these shore's (uk) is it's very easy for the leather to become saturated, and takes an absolute age to dry out again ::)
-
Kydex has got to be a god send for people who like to fish and hunt .Kydex just washes clean but imagine the state of a leather sheath after a good days fishing .
Dunc
-
Plus leather retains moisture on the tool or knife, increasing the likelihood of rust or corrosion. I got a vintage Cold Steel tanto a year or so ago that had never been used, but the blade was a mess because it had been stored in leather.
Besides, if it's cold enough to crack kydex outside, I doubt I'd be out there myself! :o :ahhh
Def
-
I do think it is just about the most practical sheath material out there at the moment, that said I quite like the sheath/scabbard design on the Buck M9, loose the wire cutters and you've got a very good little sheath :)
-
@micky d said:
Thats very true mate, my main problem with leather on these shore's (uk) is it's very easy for the leather to become saturated, and takes an absolute age to dry out again ::)If treated with SnoSeal (or a similar quality leather preservative) a leather sheath shouldn't become saturated from rain or brief immersions in water. If it becomes saturated with water, it means it hasn't been treated properly.
I have leather sheaths over twenty years old. They've seen lots of outdoors use in every kind of weather and are still going strong. They all get SnoSealed at least once a year, and more often if needed. Good leather, if kept properly treated, will last a long time.
If you're going to be in the water a lot - fishing, caving, duck hunting, etc. - where the sheath will be frequently immersed, then leather obviously isn't the best way to go.
.
-
@Defender said:
Plus leather retains moisture on the tool or knife, increasing the likelihood of rust or corrosion. I got a vintage Cold Steel tanto a year or so ago that had never been used, but the blade was a mess because it had been stored in leather.Besides, if it's cold enough to crack kydex outside, I doubt I'd be out there myself! :o :ahhh
Def
A cautionary tale about Kydex:
A buddy of mine lost a fairly expensive custom knife due to Kydex sheath failure during a winter backpacking trip. He was seriously bummed out when he went to use his knife and discovered it missing!
Temps had been ranging from -10F lows to +15F highs for several days. The Kydex had cracked all the way through and released the knife at some point during the afternoon walk, because he remembered having used it at lunch.
He almost decided to backtrack along the trail to try to find the knife, but didn't because it was basically hopeless due to the depth of snow.
.
-
We have that kind of weather here too- I call those "Inside Days." If God (or Darwin) had wanted me to go out in that weather, I'd have fur as thick as my husky's!
I've been out in it, I've worked out in it, and I've even come home and had my uniform frozen to my skin, and I figure I've done my time in it! And, I've been out in even worse than that, and so my rule is now that I just don't go out in that weather!
Besides, anything other than a fixed blade knife is virtually useless at those temperatures. You may get away with operating a set of pliers like on the PowerLock, but one handed opening blades and other implements are pretty well negated by thick gloves or mitts.
Def
-
@ringzero said:
A cautionary tale about Kydex:A buddy of mine lost a fairly expensive custom knife due to Kydex sheath failure during a winter backpacking trip. He was seriously bummed out when he went to use his knife and discovered it missing!
Temps had been ranging from -10F lows to +15F highs for several days. The Kydex had cracked all the way through and released the knife at some point during the afternoon walk, because he remembered having used it at lunch.
He almost decided to backtrack along the trail to try to find the knife, but didn't because it was basically hopeless due to the depth of snow.
The F1 sheath i have from Fallkniven (as mike will know) shouldn't be a problem in cold conditions even if the kydex did break as the knife is held in by a nylon (i'm guessing) bit at the top too.

-
I'm pretty sure it's abs plastic on that sheath mate, I don't think the swedes would make a sheath outa some brittle plastic given how cold it gets out there :o
-
Is it not kydex? my bad! but the point still stands....i think!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login