Super DIY SAK Liner Cutter
-
very nice! i guess you can also make scales using that setup! very clever

-
@Sidhartha said:
very nice! i guess you can also make scales using that setup! very clever
Yep, its what I'm going to be making do with until I get my CNC mill. Poor mans manual 2D CNC! :D I can make holes in the bottom plate to accommodate different parts to copy... 84, 91, 93 liners and then the scales will fit too since the holes are the same. At least this is my plan.. i have no idea how many liners I can cut with one carbide bit, but I hope alot. :D
Cheers!
-
Impressive! Looks very good

-
Whoa !! :o that thing is amazing ! great idea

-
Very clever Syph, very clever indeed!

-
This is brilliant! It might even work on titanium as a finishing pass after they are rough cut close to the line instead of the careful hand sanding I've been doing.
-
@bushidomosquito said:
This is brilliant! It might even work on titanium as a finishing pass after they are rough cut close to the line instead of the careful hand sanding I've been doing.Ya it's exactly that careful hand sanding that was driving me nuts. I don't have the precise finishing background you do. My plan is to use the jewelers saw to cut just at the score line when I trace out a scale, and it should trim up really easy. Just 1 mm or so of material should shave right off with a carbide bit no problem. I test cut brass and alum with the bit and it breezed through that. Then hopefully I just need to polish up the edges with fine emery paper.
I haven't got a chance to get back to the shop since, but maybe I'll get some time tonight.
-
For a liner in a 93mm I think .025" CP titanium would be just fine since it's not as structural as the 91 liners and not much harder to trim than aluminum. It's more corrosion resistant and easier to polish than the hard grade 5 stuff I use and you can still call it titanium. Definitely a huge step up from the nickle silver stock liners, especially after a few years around salt water.
Dangit, I have a roto-zip that never gets used and a few chunks of mic 6 aluminum for the rest of the apparatus and I like making specialty jigs for stuff like this. It's only a matter of time before I have to make my own. Looks like a fast way to put enough knives together to fund a CNC mill that can do it even faster.
-
@bushidomosquito said:
For a liner in a 93mm I think .025" CP titanium would be just fine since it's not as structural as the 91 liners and not much harder to trim than aluminum. It's more corrosion resistant and easier to polish than the hard grade 5 stuff I use and you can still call it titanium. Definitely a huge step up from the nickle silver stock liners, especially after a few years around salt water.Dangit, I have a roto-zip that never gets used and a few chunks of mic 6 aluminum for the rest of the apparatus and I like making specialty jigs for stuff like this. It's only a matter of time before I have to make my own. Looks like a fast way to put enough knives together to fund a CNC mill that can do it even faster.
Ya grade 2 stuff is pure Ti right? The G5 alloy is much stronger though?
-
Grade 1 and 2 are pure and work like hard rolled brass. Grade 5 is 6% aluminum and 4% vanadium and it works like spring tempered stainless. An alloy called 3al2.5v is sort of in between and would probably stand up to high speed freehand machining just fine but the Grade 5 stuff just does not like high speed tools touching it without everything being locked down tight and the tool path being very specific without vibration.
As always, anything is worth a try. I should warn you, I was that kid that stayed out of trouble by making suggestions to other kids so they would get in trouble if things went awry. Go ahead and drop that cherry bomb in the sewer. What could go wrong?

-
Well I ordered a small piece of grade 2 Ti to play with, it's a new material for me so I'm curious.
I was just out in my shop and the lexan template isnt going to hold up. I started making a much tougher template from 1/8 flat steel bar stock I had. Harder to work, but this will last a good while. This is what prototyping is all about...and it felt nice to be showered in hot sparks again! lol I got it roughed out, lots of filework left though, and then edge finishing.
-
I've never seen it happen, but they say thin flakes/chips of titanium will catch fire in a nasty sort of way if they get hot enough...
-
@J-sews said:
I've never seen it happen, but they say thin flakes/chips of titanium will catch fire in a nasty sort of way if they get hot enough...Yes, there is that issue too. It burns white hot like a welding arc. I burned up my first belt sander grinding ti and thought the white sparks were cool until the dust built up so much inside that it was basically a pile of thermite burning it's way through the steel sander shell and a 3" thick oak benchtop. It melted the iron pillow block and ball bearing inside the sander like they were made of wax. I actually save the fine oily drill shavings for tinder because one spark hits it and you have a white hot orb that will dry anything out real fast. If you keep the area blown or brushed off and don't let the shavings build up it shouldn't be a problem.
-
I've never seen it happen, but they say thin flakes/chips of titanium will catch fire in a nasty sort of way if they get hot enough...
Yes, there is that issue too. It burns white hot like a welding arc. I burned up my first belt sander grinding ti and thought the white sparks were cool until the dust built up so much inside that it was basically a pile of thermite burning it's way through the steel sander shell and a 3" thick oak benchtop. It melted the iron pillow block and ball bearing inside the sander like they were made of wax. I actually save the fine oily drill shavings for tinder because one spark hits it and you have a white hot orb that will dry anything out real fast. If you keep the area blown or brushed off and don't let the shavings build up it shouldn't be a problem.
Thanks for the tips, that sounds like something I'd do. I like modding SAK knives, not making DIY thermite...lol :D I'll be more prudent about cleaning up my piles of shavings, I often get got up in what Im working on and let things get too messy.
-
Well this is how far I got making my steel template... I peened on a liner to use as a guide and this is after 3 reinforced cutting disks, and 2 grinding bits. Lots more rough shaping to do, then im hoping I can do my carbide cutter trick to shave the last 1mm off or so. If all goes well, this will be the template to make many many liners from. :D

-
And here we have the finished product through the magic of time lapse. This took a long time, lots and lots of filing and hand finishing. I did use my router for the last bit, but it still needed more course sanding in the end.
Still needs a final polish, but otherwise I now finally have a proper template made from 1/8 inch steel!




Here is a liner sitting on top of the template, fits like a glove! This may not seem too exciting, but Im pretty proud of making this by hand. Through infinite labor and time, anything is possible! :D

Now if my titanium sheet would get here I can give this a proper test!
Cheers!
-
Well I'm impressed!

-
Thanks! It should work I think, but I dont have any metals to test it on yet. Ive got hardened aluminum, brass and Ti on the way, but shipping to Canada is less than super fast. I really dont enjoy making liners by hand so Im still optimistic this will work.
-
My Titanium sheet has been back ordered for another week now, but I at least got my hardened aluminum and half hard brass in.
I thought I'd try to speed things up a bit so I printed out the outlines of the liners and glued them to the pvc protected side so I can use as a cutting guidline without having to trace them all out.

I can get 58 liners on a 12x12 piece. :D
I'm not good with a jewelers saw so I cheated and mounted a fine jewlers blade in my bench mounted scroll saw.

The scroll saw works good for speed, but its going to take me hours to cut all these out. Luckily its just rough cutting as the precision part is done with my steel template and dremel. I think the process should be to drill all holes, rough cut, mount on template and route edges.
Hopefully my plan works out or I'll have to think of something else. :D Im for sure going to make a bunch at once to build up a stockpile as this is my least favorite modding task.
-
Well I finally got to do a bit more work on these liners. My prototype cutting system needed a tweak to get good results.
I ended up drilling holes in my bench and used long peened end brass rods to hold all the parts together in a sandwich of template, material and spacers.

I only need the top plate with this system for the router to run on.


The pins extend through my workbench and I clamp them from underneath so it pulls down tight on the whole sandwich. I found this was easier to set up and I can cut 2 liners at once with this system.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login