Suspension hater video
-
And allow designers to phone it in.
-
@hawkchucker said:
And allow designers to phone it in.:D :D
-
How about the other Gerber models? I have another Gerber, a 600 Pro Scout. I hope this model is not another junkie.
Eddie
My 2 Gerbers

-
No the 600, are a much better piece of kit, they've got a lot off fans here :)
-
Me for one! See I dont hate all gerbers.
-
Are all your tools that clean Eddie or do you have a magic camera ???
-
Yup the 600 series (and 400) are both excellent tools. Gerber do seem able to produce some fantastic tools, and then some utter crap. I'd prefer it if they didn't make some of the poorer tools in their catalogue as it sullies their name but as long as they continue making the good stuff i don't really mind, i just won't buy the poor ones!
-
Left a little nugget of [COUGH!] "wisdom" for our pal Dougie. :D ;)
-
@Roadie said:
Yup the 600 series (and 400) are both excellent tools. Gerber do seem able to produce some fantastic tools, and then some utter crap. I'd prefer it if they didn't make some of the poorer tools in their catalogue as it sullies their name but as long as they continue making the good stuff i don't really mind, i just won't buy the poor ones!It would be nice if Gerber would package and market their tools similar to Benchmade or Spyderco/Byrd...a premium line,and an economy line. -
Thats not a bad idea Bob mate :)
-
They used to... Winchester used to be the cheap line of Gerbers, and they may still be, but I haven't heard anything form them lately. Of course that's taking a page from the book of United Craplery and Taylor- the Winchester name is quite reliable for long guns, and a well respected old American company being cheapened by crappy Chinese made tools cranked out by discount 5 year olds....
Def
-
Winchester tools really are quite bad, i've had a few given me over the years and they all pale in comparison to Gerber tools (that i've used, not handled any of the new "suscruxtresolve" tools)
-
I have one, and trust me, that's more than enough. While I may have a slight interest in some cheap pieces of crap, the Winchester line is well and truly beneath even me...
Def
-
I had one of there slippies for a while, that was a true POS >:(
-
@micky d said:
@micky d said:
Are all your tools that clean Eddie or do you have a magic camera ???
They are both really clean. :o Do they not see a lot of use?
He's just got a good cleaning regime, you'd need it considering how humid it is the phillipeans :o
Thanks!
Considering the very high cost of USA made tools here I take very good care of them. They're not shelf queens, they take their turn as EDC.
Eddie
-
I was actually given a Winchester tool as a thank you for playing santa this winter. It still is in the package, and will most likely be felled to that lonly position in the tackel box. Ya know the tool that sits there in filth and rust unused until you clean out the box in the fall and chuck it out.
-
@hawkchucker said:
I was actually given a Winchester tool as a thank you for playing santa this winter. It still is in the package, and will most likely be felled to that lonly position in the tackel box. Ya know the tool that sits there in filth and rust unused until you clean out the box in the fall and chuck it out.I think we've all got junkers like that ::)
-
The video guy is kind of right about the plier head. He points to the parting line in the metal as evidence of the reason it broke. But the Suspension pliers are not zinc or pot metal, they are stainless steel. The parting line is there because of how the plier was created.
It was most likely made using a Metal Injection Molding process, or MIM. High stress parts like plier jaws have no business being made this way. The structure of the metal is actually crystal-like, with no grain, and will fracture easily.
Tools should always be made by forging, a process that any blacksmith is familiar with. Forging actually strengthens the metal. But it costs more to finish-machine a forged part, whereas a part made using the MIM process can be cast to size, with no further machining required.
So even though the Suspension jaws are made from stainless steel, they are still weaker than jaws of forged stainless steel.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login