Leatherman Wingman Review
-
What I can't understand is why did Leatherman leave out the lanyard ring on the wingman
Theres space there for it and they just put a washer in there ::) I know not everyone is a fan of lanyard rings but its better to have and not need then to need and not have . -
My guess would be to further differentiate models. Plus, it may only be included on the Sidekick because of the carabiner.
Def
-
@Grant Lamontagne said:
No problem- I have a pretty thick skin anyway! I just wanted to address it in case anyone else thought that reading it later on, and as I said, I wasn't really comfortable putting it in there because it is a personal preference.Besides, I wouldn't post stuff here if I didn't fully expect folks to disagree with me!

Def
I disagree!
what?
-
@Dunc said:
What I can't understand is why did Leatherman leave out the lanyard ring on the wingman
Theres space there for it and they just put a washer in there ::) I know not everyone is a fan of lanyard rings but its better to have and not need then to need and not have .Look on the back end of the handle of the Wingman/Sidekick. See those holes on the back of the handle? I started wondering why they were flush with the folding tools on the clip side of the tool, but are lined on the inside, and turned out slightly on the side of the tool with the blade and scissors. I >think< that's to allow a small ring or lanyard to be passed through there. Not certain, just a suspicion. Otherwise, I don't know why they would go through the extra expense of putting a liner piece on the inside, except to decrease wear to a lanyard. You couldn't fit 550 through there, but thinner stuff would work, I think.

In theory, the corners are turned out somewhat so a lanyard wouldn't jam up the tools when they were extended.
I'm not saying this is a fact, just my theory.
Here's my Wingman sporting the wrist strap from my camera as an example...

-
Interesting- I just thought those were more useless holes cut in them to try and make them look fancy.
I'll have to take a closer look.
Def
-
Those aren't 'useless holes'. They... uhhh... cut down on wind resistance at subsonic speed. Yeah, that's it. They improve drag coefficient.

-
Thanks for the reply , I realise that the holes in the frame make an ideal lanyard point but I still think it was a bad idea for Leatherman to out a dedicated lanyard ring on the sidekick and only a washer on the wingman .
-
@Lynn LeFey said:
Those aren't 'useless holes'. They... uhhh... cut down on wind resistance at subsonic speed. Yeah, that's it. They improve drag coefficient.
Actually, in my opinion they are worse than useless holes. Useless implies no impact on function one way or the other, while these are actually detrimental holes as I often confuse them with the blade opening hole.
Def
-
-
I thought I'd add this note on my latest Wingman testing.
I opened a bunch of cans today with various multitools I own. In this test, the Wingman performed middle-of-the-road. The can opener works as promised. Not great, not terrible. It's better than the can opener on my SOG Powerlock, about the same as most of my cheapo multitools, and not as good as that on my cheapo Sheffield 1200E.
There was no slipping off the lip of the can, but cutting strokes with it are short. 3 of 5 stars, IMO.
EDIT: additionally, the package opener was tested and cuts medium zip ties in one pass. It took me three passes with it to cut 550 paracord, and it left some ugly fraying.
-
Good to see some real world testing going on!

If you want to play with a good package opener, check out the one on Gerber's Octane and Dime models. They are excellent. I actually used the Dime's package opener the other day to free a Gerber Steady from it's package!
Def
-
I used the scissors on the Wingman last night to cut open a package of guacamole.
Results:
- They cut the heavy plastic pouch well
- They are guacamole resistant.

As I tend to strongly lean toward keychain size MTs for EDC, the Dime is definitely on my radar right now.
-
Picked up that wingman on a whim the other day. Carried it to see how it rides in the pocket with the pocket clip the last couple days. Not bad. Oh how I wish my rebar had a pocket clip... Modders

I'm somewhat impressed so far with the wingman (for what it is). I had really low expectations and only paid a whopping $25 for it. So I've been very pleasantly pleased.

I'm afraid it's gonna see a bit of pocket time really, because of that sweet pocket clip. My rebar is sad, and lonely on the table right now. While the wingman is warm and cozy, in my pocket...
-
-
-
-
Sorry for the necro bump and if there is another thread on the wingman.
/topic/32035
I wish I knew before ordering.
I had read nothing on it prior to buying it either. I never cared for the way it looks. I have it in my head a Leatherman is supposed to look like a pst, Supertool or even the micra for that matter. Squared, rectangular, sleek, clean lines. Those are more my style. Not the wingman or really most of the ones with oho tools.
But for $25 I bought it. And although there are shortcomings I am happy I got it to add to my collection. I am usually a guy who carries the same tool for years day in day out. But recently I've started adding to the collection and am enjoying varying my Edc.
Although it's silly to cut something that thin with "wire cutters", the precision on my rebar and even freestyle are much tighter and have overlap to be able to cut through the smallest diameters. Also, I think the scissors on the wingman are fantastic, which is probably a task more apt for that anywho. And the belt clip just needs the torq tighten.
So I'm still "enjoying" it for what it is. Also, I read the last post in that thread you linked too. As far as the tools "clumping" I have had that issue before. But not with the wingman, they are actually buttery smooth.

-
Sorry for the necro bump and if there is another thread on the wingman.
/topic/32035
I wish I knew before ordering.
But for $25 I bought it. And although there are shortcomings I am happy I got it to add to my collection. I am usually a guy who carries the same tool for years day in day out. But recently I've started adding to the collection and am enjoying varying my Edc.
Although it's silly to cut something that thin with "wire cutters", the precision on my rebar and even freestyle are much tighter and have overlap to be able to cut through the smallest diameters. Also, I think the scissors on the wingman are fantastic, which is probably a task more apt for that anywho. And the belt clip just needs the torq tighten.
So I'm still "enjoying" it for what it is.

I got carried away from all the misleading reviews on youtube. "Standard LM quality" bla-bla-bla.
It dropped to $27 in Amazon, so I thought, why not?
If you buy a tool and it turns out to be less than you expected, you either learn to love it, or just sell it.
I use my Wingman from time to time, because why not. I don't like it all that much, so I don't mind if I rough it up a bit.
Did you get the Rebar after the Wingman? That's what I did. Awesome tool. -
Sorry for the necro bump and if there is another thread on the wingman.
/topic/32035
I wish I knew before ordering.
But for $25 I bought it. And although there are shortcomings I am happy I got it to add to my collection. I am usually a guy who carries the same tool for years day in day out. But recently I've started adding to the collection and am enjoying varying my Edc.
Although it's silly to cut something that thin with "wire cutters", the precision on my rebar and even freestyle are much tighter and have overlap to be able to cut through the smallest diameters. Also, I think the scissors on the wingman are fantastic, which is probably a task more apt for that anywho. And the belt clip just needs the torq tighten.
So I'm still "enjoying" it for what it is.

I got carried away from all the misleading reviews on youtube. "Standard LM quality" bla-bla-bla.
It dropped to $27 in Amazon, so I thought, why not?
If you buy a tool and it turns out to be less than you expected, you either learn to love it, or just sell it.
I use my Wingman from time to time, because why not. I don't like it all that much, so I don't mind if I rough it up a bit.
Did you get the Rebar after the Wingman? That's what I did. Awesome tool.No I had the rebar first, to basically replace a Supertool 300 for everyday carry. I really like it, and it is about as close as I'm gonna get with the tools out now to the perfect tool for me

My Wingman review in a nutshell is. "My extremely low expectations for this tool have been mildly exceeded."

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

