Home made camp stoves
-
I was just about to suggest that. While discussing it a few weeks ago I think Jie pointed out one that didn't require a registration or service fee.
Def
-
Awesome! Thanks for the info! I'm going to make her get one and take it with her.
Thanks boss... I'll definitely look more into this... no matter the expense, I'll get her to get whatever will work best for her. Her safety is priceless to me.
Thanks again for the info... you guys rock!

@Mr. Whippy said:
@Heinz Doofenshmirtz said:
Good to know... thanks for the info. I know Ti is a lousy heat sink material from my flashlight experience... kinda dumb of me not to realize that with respect to cookware... :P
Fortunately, she's avoiding the Ti stuff because of its cost. To me it doesn't make much difference, but she keeps reminding me that I'm a lot stronger than she is, so the weight is much more of an issue for her.
That's really the one thing about her doing this trip that worries me... she's insisting on doing it alone. Wants the challenge and the "me time"... I've got no problem with that, but I still worry about her being out there on her own, and sometimes I feel like she's not being realistic in her risk assessment. Regardless, I'm doing everything I can to be supportive and helpful of her goal with this, so I'll make sure to pass this on.
(She says I should worry more about taking care of the kids by myself for a whole week! :ahhh )
@50ft-trad said:
@Heinz Doofenshmirtz said:
That's really cool! My wife has been harrasing me to make her a "tuna can" stove for her to use for backpacking. She's planning on doing about a 50 mi. stretch of the John Muir Trail this summer and is going all weight-weenie for it. She wants to just get a cheapie alcohol burner and something to put it in, very much like what you've done here. I'll have to mention it to her. Thanks for the pics!
Paul, if she's going to be a miser with the milligrams, don't let her fall into the trap of titanium cookware especially with a low temperature stove such as alcohol. It's such a bad conductor that you need more fuel in comparison with other pots do do the same cooking, and she'll end up having to carry more grams of additional fuel than she will save by using titanium ::)
Consider a SPOT if you're really concerned. They are excellent if you have a view of the sky (ie no good for caving and limited use in canyoneering). We insisted my daughter take one along when she would head out for climbing trips in CO, UT, NV, NM etc.
http://www.findmespot.com/en/ I think there are places that will rent these for short term use too.
-
I made the pilgrimage to the nearest IKEA a while back and have been fooling around with drainers. So far I have built three of them.
The first is made from the short drainer with a pot support made from 1/8" steel bar.
The second is shortened to nest with a Coleman Cookset from a tall drainer...I rolled the cut-edge slightly to stippen the rim. This is the one I've tinkered with most. Since I rarely get to burn wood, I've been turning it to use a Trangia burner as a primary heat source. Currently I've been experimenting with a strip of aluminum flashing placed inside to form a more effective windscreen for the alcohol stove.
The third is shortened to nest with an Imusa aluminum mug.



-
@Grant Lamontagne said:
I was just about to suggest that. While discussing it a few weeks ago I think Jie pointed out one that didn't require a registration or service fee.Def
Here's the post from Jie:
Survival Knives
Also I recall you need a expensive subscription with SPOT for it to work, and your request for assistance is sent to the company, who then try to pass it to ...
Multitool.Org Forum (multitool.ninja)
Apparently it's a Canadian thing, but there should be similar services for other countries as well.
Def
-
Rather than add support feet like I've seen others do, I used the cut-off pieces of the tall drainers.
I made slits down to the original holes and added a new row of vent holes. It's a pretty snug friction fit and after a couple of burn cycles, found it impossible to remove without damaging the strainer.


-
Clever

-
I've been refining this Coffee boiler setup since I got a new coffee mill. I've probably tried 8 or 9 variations of port sizes, hole patterns and flame gap so far with the Pepsi-G style stove
It's actually an aluminum greasepot of about 3 cups capacity. I used the strainer insert as a base for the pot stand...computer fan, stainless screws and hardware, aluminum tubing as spacers. The stand stows upside-down in the pot along with a roof flashing windscreen (not shown).



-
:o I'm always amazed by your stuff Spork

-
This is probably my favorite homebuilt stove stand. It's my version of Risk's CoffeeStove
It's actually meant as a twig burner, but works well with alky stoves. I sized mine to fit in a BSA messkit billy...a notch in the rim of the can allows the original plastic cup to nest with the stove. The support arms stow on the bottom of the can...held in place with the plastic lid (which can be used as a mini cutting board)
The burners are my latest build using Miller Light canbottles (sturdier than standard soda cans). Slightly modified Pepsi-G build to provide a shoulder for the simmer ring to rest...really just an 1/8" higher inner wall. The un-moderated run time on an ounce of fuel is averaging 6-7 minutes (hard boil around 5). The ring doubles the burn time. I guess technically it's not a simmer ring, but I'm hoping it will moderate the heat output enough so that I don't burn my bacon ::)



-
We need a "Spork's camp stove setups" thread.
These are just amazingly clever variations on a theme and each has its own application. Really smart design.

-
We need Spork's tutorials because his stoves look better than the originals...and everything else out there.
-
Tony plenty of twigs in my garden to try this out. Also if you want a trip to go outdoors while here in Sheffield it is only 2 miles from where I live. I also have a trang set up which includes the handle which you can use while here.
-
I like the idea of playing in your garden Mate, near the new forge ;)
-
Tested at the Meet and works well with twigs
After this picture I replaced the Ali with steel tent pegs ;) (thanks HK)
(If anyone wants to copy my one I would suggest moving the feed hole up towards the top)
-
Yes, I prefer a higher port too...keeps the flaming bits and pieces from falling out and seems to be easier to feed.
-
I will say I was impressed with Tony's deodorant can stove, worked extremely well.

-
-
These drainers are just two pounds each at Ikea (there's a taller drainer available aswell )

Smart Angel IKEA - ORDNING Cutlery Caddy, Stainless Steel
Diameter: 4 3/4" 12cms
Height: 5 3/8" 13.5cms
http://www.ikea.com/gb/en/catalog/products/30011832/ -
I just got in from the back yard where I fired up my third attempt at a wood-gas stove made from cans (a 15oz can and a larger tin can for the outside.
Here's a link to the PDF of the original version, the 'Everything Nice' wood-gas stove...
http://worldstove.com/wp-content/uploads/2009/11/EverythingNice_Stove_Instructions.pdfI've been experimenting with the simplest ways to make them with my EDC tools.
I'll see about posting a pic of the nasty looking thing if there's any interest. It is fueled by the branch litter created by our oak in the back yard, and runs for about half an hour on 2/3 of a 15oz can's worth of twigs. The wood gas stove design is simply incredible, IMO.
Here's a video someone posted on youtube of their build, if you want an idea of how simple it is.
Everything Nice wood gas stove -
Thanks Lynne
You know we will want some pictures of yours in action
I just have to finish my new 'short spork' and my little set up is just about sorted

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





