SwissChamp mod
-
Dear friends, none of the suggested links seem to have the pins or bushings.
The edc shops dont have any listed and the usaknifemaker doesn't have parts for vics :(
I got a welding rod as enki_ck suggested. I think I will play with it this weekend. -
The suggested "Hive of SAKtivity" is the shop of our mod Neil
You can send him a PM and ask if he has some to sell you. He had them in his store not too long ago but hasn't listed any recently.
-
If Neil is out, rotokid (Tom) should have some, but there is no listing for it so you'll have to PM and ask. Tom supplied me with a 2.2, 2.5 and 3.0 rod when I first started modding.
-
OK then!
Thank you both :) -
Looks good! Oh wait...
Is there a specific order which you place the layers?
Second attempt looks even worse...

-
the order determines the accessibility to the tools, i would copy the original order minus the tools you removed

-
You got the small blade and the large blade wrong I think :)
-
@Reinier said:
You got the small blade and the large blade wrong I think :)Yes, you put the spacer on the wrong side. It should be spacer, big knife, small knife, outer liner.
But why are you posting mirror images. You got me confused about everything until I mirror flipped the images. :ahhh Everything was out of place.

The opener layers still looks somewhat weird

-
You got the small blade and the large blade wrong I think :)
Yes, you put the spacer on the wrong side. It should be spacer, big knife, small knife, outer liner.
But why are you posting mirror images. You got me confused about everything until I mirror flipped the images. :ahhh Everything was out of place.

The opener layers still looks somewhat weird

The images are not mirrored. I can assure you I put them ALL backwards... :-[
I will try again tomorrow morning. Thanks for heads up my friends :DSent from my DesireS using Tapatalk
-
Welcome Ethaniel! You're an inspiration! Interested in modding myself, but not yet feeling up to the task!

Don't underestimate the utility of SAK pliers! Think of them as really heavy duty forceps instead of pliers, and you'll see they can have a lot of good use. I use them regularly for fashioning single use or short term duty tools out of paperclips. My son is a Lego-holic (his room looks like a bomb went off in a Lego factory) and I often end up having to pull things apart for him, or pull something out of another part that I always wonder how he got it in there in the first place. My daughter is also quite inquisitive and I find myself pulling things apart or out of small spaces that she's managed to jam in somewhere, so I make small hooks out of paper clips and the like quite often. They're also fantastic for removing staples and glass slivers from my son's bike tires (he gets flats a lot for some reason).
Just check my sig... they're often under-appreciated and needlessly maligned tools! :D
-
@Heinz Doofenshmirtz said:
Welcome Ethaniel! You're an inspiration! Interested in modding myself, but not yet feeling up to the task!
Don't underestimate the utility of SAK pliers! Think of them as really heavy duty forceps instead of pliers, and you'll see they can have a lot of good use. I use them regularly for fashioning single use or short term duty tools out of paperclips. My son is a Lego-holic (his room looks like a bomb went off in a Lego factory) and I often end up having to pull things apart for him, or pull something out of another part that I always wonder how he got it in there in the first place. My daughter is also quite inquisitive and I find myself pulling things apart or out of small spaces that she's managed to jam in somewhere, so I make small hooks out of paper clips and the like quite often. They're also fantastic for removing staples and glass slivers from my son's bike tires (he gets flats a lot for some reason).
Just check my sig... they're often under-appreciated and needlessly maligned tools! :D
Dont get me wrong my friend. I like the pliers as well! In fact I used them a bit. It's just that they dont really fit the kind of heavy duty work I do. I'd rather have the bulky philips screw driver than that small plier... To be honest, I'd rather have the Wenger plier... But i don't have parts :(
Besides, this is a small mod I wanted. Small and efficient if you know what i mean :) -
@Heinz Doofenshmirtz said:
Welcome Ethaniel! You're an inspiration! Interested in modding myself, but not yet feeling up to the task!

Don't underestimate the utility of SAK pliers! Think of them as really heavy duty forceps instead of pliers, and you'll see they can have a lot of good use. I use them regularly for fashioning single use or short term duty tools out of paperclips. My son is a Lego-holic (his room looks like a bomb went off in a Lego factory) and I often end up having to pull things apart for him, or pull something out of another part that I always wonder how he got it in there in the first place. My daughter is also quite inquisitive and I find myself pulling things apart or out of small spaces that she's managed to jam in somewhere, so I make small hooks out of paper clips and the like quite often. They're also fantastic for removing staples and glass slivers from my son's bike tires (he gets flats a lot for some reason).
Just check my sig... they're often under-appreciated and needlessly maligned tools! :D
Dont get me wrong my friend. I like the pliers as well! In fact I used them a bit. It's just that they dont really fit the kind of heavy duty work I do. I'd rather have the bulky philips screw driver than that small plier... To be honest, I'd rather have the Wenger plier... But i don't have parts :(
Besides, this is a small mod I wanted. Small and efficient if you know what i mean :)I understand about the Wenger pliers... I got a Patagonia Ranger 179 a couple of weeks ago, and now I want one with pliers! Never mind that I don't really even need them all that much, and I've already got three other Leathermans!

I'm jonesing for two mods right now myself... an Explorer with pliers, and a Compact with a cybertool bit driver and holder.
-
Almost there! :D
Although I think my corkscrew might be a little bent :(
**
UPDATE: I just noticed that the center pin (with bushing) is a little loose. The tools still snap in but I want to know if there's a problem or something i could do about it.**


-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

-
@Sidhartha said:
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.
I mean this one

-
Welcome,
Its nice to see the pictures of your work as you do it
-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

I mean this one
That's the one Sidhartha was talking about. It can be a bit loose.
But you didn't set your knives right. The spacer, the small part that is on the same side as the small blade should be on the other side, so the big blade can rest on it.
-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

I mean this one
That's the one Sidhartha was talking about. It can be a bit loose.
But you didn't set your knives right. The spacer, the small part that is on the same side as the small blade should be on the other side, so the big blade can rest on it.
Oh man... that really sucks :(
I knew something was wacky... Now I have to take it apart again
I thought I put them back right this time :(
Thanks for pointing out AGAIN -
I lost 2 bushings... They fell of my bench

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login