SwissChamp mod
-
@Heinz Doofenshmirtz said:
Welcome Ethaniel! You're an inspiration! Interested in modding myself, but not yet feeling up to the task!

Don't underestimate the utility of SAK pliers! Think of them as really heavy duty forceps instead of pliers, and you'll see they can have a lot of good use. I use them regularly for fashioning single use or short term duty tools out of paperclips. My son is a Lego-holic (his room looks like a bomb went off in a Lego factory) and I often end up having to pull things apart for him, or pull something out of another part that I always wonder how he got it in there in the first place. My daughter is also quite inquisitive and I find myself pulling things apart or out of small spaces that she's managed to jam in somewhere, so I make small hooks out of paper clips and the like quite often. They're also fantastic for removing staples and glass slivers from my son's bike tires (he gets flats a lot for some reason).
Just check my sig... they're often under-appreciated and needlessly maligned tools! :D
Dont get me wrong my friend. I like the pliers as well! In fact I used them a bit. It's just that they dont really fit the kind of heavy duty work I do. I'd rather have the bulky philips screw driver than that small plier... To be honest, I'd rather have the Wenger plier... But i don't have parts :(
Besides, this is a small mod I wanted. Small and efficient if you know what i mean :)I understand about the Wenger pliers... I got a Patagonia Ranger 179 a couple of weeks ago, and now I want one with pliers! Never mind that I don't really even need them all that much, and I've already got three other Leathermans!

I'm jonesing for two mods right now myself... an Explorer with pliers, and a Compact with a cybertool bit driver and holder.
-
Almost there! :D
Although I think my corkscrew might be a little bent :(
**
UPDATE: I just noticed that the center pin (with bushing) is a little loose. The tools still snap in but I want to know if there's a problem or something i could do about it.**


-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

-
@Sidhartha said:
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.
I mean this one

-
Welcome,
Its nice to see the pictures of your work as you do it
-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

I mean this one
That's the one Sidhartha was talking about. It can be a bit loose.
But you didn't set your knives right. The spacer, the small part that is on the same side as the small blade should be on the other side, so the big blade can rest on it.
-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

I mean this one
That's the one Sidhartha was talking about. It can be a bit loose.
But you didn't set your knives right. The spacer, the small part that is on the same side as the small blade should be on the other side, so the big blade can rest on it.
Oh man... that really sucks :(
I knew something was wacky... Now I have to take it apart again
I thought I put them back right this time :(
Thanks for pointing out AGAIN -
I lost 2 bushings... They fell of my bench

-
Reboot!
I know it's been months since my last post...
I haven't finished the mod yet due to boredom and other stuff that had to be done.
Last night I thought I should finish it.
Anyway, as I browsed other mods, I had a desire to install a combo tool on my mod. It should save a bit more space... So, this morning i visited my local flea market once more and I got myself these two knifes for 6 euro each (don't know the models), but when I came back home I saw that my swisschamp tools are larger than these.- Would they fit properly?
- Can I use just the combo with the same spring?
Also I'd like to know where can I get new shiny scales. The links some members sent me are empty.
Thanks
EDIT: blade compare


-
bump?
I don't want to take my new knife apart if it won't fit :( -
Sorry, I missed your update post. No, the combo tool from the 84mm Waiter and Bantam is too small. You'd need one from a 91mm Compact. I'm glad you're back on it though. Keep us updated.

-
I think i have a Compact with a bent corkscrew that i could let go cheap and i have an assortment of new or slightly used scales - Shipping from Germany to greece will not be very expensive, too.
So, if you are interested, drop me a PM and we can work something out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login