Can Opener Test
-
@50ft-trad said:
Ermmm .... sorry, can I step in a sec ...- Point to Lynn I reckon! Mr W just said that can openers never get sharpened ... yet they keep on working (they do in our house anyway) ... and they're still easier (for me) to use than a SAK after they've done a few years work
But since you don't use it on the thicker steel of a #10 can, you can't appreciate how much the larger cans dull and loosen a crank opener. We've broken or dulled 2 or 3 hand crank openers in 4-5 year period. They just don't hold up well.
These larger sized cans are much more cost efficient if you go through a lot of product (like green beans to dogs, carrots to hide the flavor of medication to horses, etc). Of course, there are industrial can openers for this sort of thing, but that's not really the point to this, is it?
-
@Mr. Whippy said:
@50ft-trad said:
Ermmm .... sorry, can I step in a sec ...
- Point to Lynn I reckon! Mr W just said that can openers never get sharpened ... yet they keep on working (they do in our house anyway) ... and they're still easier (for me) to use than a SAK after they've done a few years work
But since you don't use it on the thicker steel of a #10 can, you can't appreciate how much the larger cans dull and loosen a crank opener. We've broken or dulled 2 or 3 hand crank openers in 4-5 year period. They just don't hold up well.
These larger sized cans are much more cost efficient if you go through a lot of product (like green beans to dogs, carrots to hide the flavor of medication to horses, etc). Of course, there are industrial can openers for this sort of thing, but that's not really the point to this, is it?
Of course not mate ;) -
For the record,
This is the can opener we had in the bakery when I was growing up:

And we opened a fairly large number of #10 cans (condensed milk, fruit, etc)
-
Not sure whether I agree on 20 seconds making no difference. If you open three cans, it'll just make dinner a minute later. Which is of little practical importance. But, let's say you run a kennel and open 10 cans a day (I'm pulling this example out of my a**, I have no idea whether it is reasonable to open those 10 cans, especially since most kennels will have most of the feed in bags), that's 200 seconds a day, or just under three and a half minute. In a month, that will add up to 1:40 of working time. That's real money for a company.
-
Mr. Whippy, how about you go get a EZ-DUZ-IT can opener...
http://www.amazon.com/Made-in-USA-Can-Opener/dp/B007DK6SG0/ref=sr_1_1?ie=UTF8&qid=1334166298&sr=8-1And I'll get a vic, and then we can have a rational, and hopefully non-biased discussion.
-
@Steinar said:
Not sure whether I agree on 20 seconds making no difference. If you open three cans, it'll just make dinner a minute later. Which is of little practical importance. But, let's say you run a kennel and open 10 cans a day (I'm pulling this example out of my a**, I have no idea whether it is reasonable to open those 10 cans, especially since most kennels will have most of the feed in bags), that's 200 seconds a day, or just under three and a half minute. In a month, that will add up to 1:40 of working time. That's real money for a company.But what about the time you loose when you have to go to the drawer and get (or even worse: search for) the manual crank can opener while your VIC is in your pocket ...
Note to myself: you told yourself to stay out of this and look what you just did ...

P.S. Love the "can opening videos" here ;).
-
Why would** a man** be opening cans anyway??
-
@Top-Gear-24 said:
But what about the time you loose when you have to go to the drawer and get (or even worse: search for) the manual crank can opener while your VIC is in your pocket ...The crank can opener hangs/lies in a fixed spot right where you use it, or has a chain (or is mounted on the wall), and since you always have a SAK or multi-tool on your person, you use that immediately instead of searching for the manual opener which has been removed for cleaning/replacement/whatever. :)
Note to myself: you told yourself to stay out of this and look what you just did ...

You are discussing a hypothetical example meaning to evaluate whether an argument used by the two who actually have done tests have merit. So, not only have you joined the thread, you have joined the meta-discussion instead of the actual topic as well.

-
@Steinar said:
Not sure whether I agree on 20 seconds making no difference. If you open three cans, it'll just make dinner a minute later. Which is of little practical importance. But, let's say you run a kennel and open 10 cans a day (I'm pulling this example out of my a**, I have no idea whether it is reasonable to open those 10 cans, especially since most kennels will have most of the feed in bags), that's 200 seconds a day, or just under three and a half minute. In a month, that will add up to 1:40 of working time. That's real money for a company.To put this in real world scenario, IF I were opening 10 large cans per day at a kennel, I'd purchase the above commercial can opener and never touch a portable hand crank or Vic opener. We had the above opener in my parents' bakery, and it'll rip through a can in 10 sec or less with virtually no effort. (Due to the length of the crank handle).
-
@Mr. Whippy said:
To put this in real world scenario, IF I were opening 10 large cans per day at a kennel, I'd purchase the above commercial can opener and never touch a portable hand crank or Vic opener. We had the above opener in my parents' bakery, and it'll rip through a can in 10 sec or less with virtually no effort. (Due to the length of the crank handle).To put THIS in a real-world scenario, virtually no one opens #10 cans AT ALL unless it's in that industrial kind of setting.
-
@Lynn LeFey said:
Mr. Whippy, how about you go get a EZ-DUZ-IT can opener...
http://www.amazon.com/Made-in-USA-Can-Opener/dp/B007DK6SG0/ref=sr_1_1?ie=UTF8&qid=1334166298&sr=8-1And I'll get a vic, and then we can have a rational, and hopefully non-biased discussion.
I have the OXO can opener (similar design)

That's what my opinion is based on.
-
@Lynn LeFey said:
@Mr. Whippy said:
To put this in real world scenario, IF I were opening 10 large cans per day at a kennel, I'd purchase the above commercial can opener and never touch a portable hand crank or Vic opener. We had the above opener in my parents' bakery, and it'll rip through a can in 10 sec or less with virtually no effort. (Due to the length of the crank handle).
To put THIS in a real-world scenario, virtually no one opens #10 cans AT ALL unless it's in that industrial kind of setting.
Watch the carts that come out of a Sam's Club, BJ's Warehouse or Costco. You might be surprised.
-
So I should base my claim on the Vic's ability on the SOG's 'similar design' can opener? Am I understanding you correctly?
Also... HURRICANE OF POSTS!!!!!!
-
Cool. I'm done here.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

