Can Opener Test
-
@Lynn LeFey said:
Mr. Whippy, how about you go get a EZ-DUZ-IT can opener...
http://www.amazon.com/Made-in-USA-Can-Opener/dp/B007DK6SG0/ref=sr_1_1?ie=UTF8&qid=1334166298&sr=8-1And I'll get a vic, and then we can have a rational, and hopefully non-biased discussion.
I have the OXO can opener (similar design)

That's what my opinion is based on.
-
@Lynn LeFey said:
@Mr. Whippy said:
To put this in real world scenario, IF I were opening 10 large cans per day at a kennel, I'd purchase the above commercial can opener and never touch a portable hand crank or Vic opener. We had the above opener in my parents' bakery, and it'll rip through a can in 10 sec or less with virtually no effort. (Due to the length of the crank handle).
To put THIS in a real-world scenario, virtually no one opens #10 cans AT ALL unless it's in that industrial kind of setting.
Watch the carts that come out of a Sam's Club, BJ's Warehouse or Costco. You might be surprised.
-
So I should base my claim on the Vic's ability on the SOG's 'similar design' can opener? Am I understanding you correctly?
Also... HURRICANE OF POSTS!!!!!!
-
Cool. I'm done here.
-
@Lynn LeFey said:
So I should base my claim on the Vic's ability on the SOG's 'similar design' can opener? Am I understanding you correctly?Also... HURRICANE OF POSTS!!!!!!
The OXO opener comes as a highly recommended version of the portable hand crank opener, from several cooking magazines. It comes with at least as many recommendations as the Amazon link. Remember, this isn't new engineering, just level of quality. I doubt anyone would place a blackmark against OXO regarding quality of their utensils.
-
@Lynn LeFey said:
@Lynn LeFey said:
[quote author=dks link=topic=36802.msg591574#msg591574 date=1334167117]
Why would** a man** be opening cans anyway??NOT funny.

It was not meant to be..... >:D

It has also been reported to the mods.
I know...
[/quote]Hey, hey...
Yes, the comment was sexist, but I don't think it was truly meant to offend. This has been a pretty enjoyable thread up until this point. Let's keep things sociable on the playground.

-
Can openers are for wussies ...
-
Definitely slower than a Vic.
<- Star Trek themed "can opener" -
From first hit to second, it was 14 seconds. I think that even beats a spoon!
However, it was a pop top can, so it's a cheat.
Now I've gotto find the Cody Lundin 'curb' method...
Reported time was 'a couple minutes'.
CODY LUNDIN CAN OPENER -
Ok.
Two more points:
Point #1:
In boy scouts, we opened a can with a ax. Placed it in the V of branch, and chopped the top off. Didn't spill much either!Point #2:
A friend's dog used to open the cupboard, pull out a can, usually tuna, or cat food, and chew on it until it was absolutely flat, squeezing all the goodness out of it. Sorta like squeezing an orange for juice, I suppose... -
Yeah, you can also hammer the tip of most any blade straight down into a can to open it.
My testing from the beginning of the thread was limited to 'tools actually purpose-made to open cans'.
I'll limit any of my future time trials to those tools only. :D
-
So no video of you chewing through a can? Sort of disappointed here...
(No, I'm not volunteering to time the method myself, so I guess I have nothing to complain about. :-X )
Sort of on-topic note of the day: This is a quick cut'n paste from http://en.wikipedia.org/wiki/Can_opener : Although preservation of food using tin cans had been practiced since at least 1772 in the Netherlands, the first can openers were patented only in 1855 in England and in 1858 in the United States.
-
Consider the development of the SAK can opener (the “tin
opener”): In 1795 Napoleon Bonaparte offered a reward of 12,000 French
francs for a way to preserve food in containers for his troops (“An army
marches on its stomach”). In 1810 Nicolas Appert of France won this prize
with his sealed-after-boiling glass-bottle method. This same year Peter Du-
118
rand of England received a patent for the application of Appert’s method
to food cans of the kind used by the Dutch Navy since the 1770s, resulting
in what we call the “tin can” (actually a tin-coated iron can). For eighty
years cans of food had to be opened with an ax or, as the instructions
printed on the can said, “hammer and chisel”. A can-opener was not invented
until 1855, by Robert Yates of England; a good design still being
used today. In 1858 Ezra Warner of Connecticut patented a slim but complicated
“bayonet and sickle” opener which was as hazardous as the ax
method, even on the thinner steel cans then being made. The tin opener
on the 1890 Swiss Soldier’s Knife was a somewhat safer design: After
punching a starting slot with the tip of the tool, the sharp edge of the sicklelike
hook cut the can from the inside; a small angled arm was levered
against the top of the can as the hook cut around the top.
etc. The Swiss Army Knike Owner's Manual -
@Mr. Whippy said:
@Lynn LeFey said:
[quote author=Lynn LeFey link=topic=36802.msg591577#msg591577 date=1334167361]
[quote author=dks link=topic=36802.msg591574#msg591574 date=1334167117]
Why would** a man** be opening cans anyway??NOT funny.

It was not meant to be..... >:D

It has also been reported to the mods.
I know...
[/quote]Hey, hey...
Yes, the comment was sexist, but I don't think it was truly meant to offend. This has been a pretty enjoyable thread up until this point. Let's keep things sociable on the playground.

[/quote]
I know I am opening a can of worms here, but in dks defense, it was meant to be joke only. Nothing more. -
@ducttapetech said:
I know I am opening a can of worms here, but in dks defense, it was meant to be joke only. Nothing more.But were you opening that can of worms with a Vic or a dedicated opener? Was it a #10 can of worms? :o
In all seriousness, jokes like this can slide when a forum is mostly guys, or women that are used to us. But it is also important to remember that the forum must be welcoming to all least we drive away those we would help. :)
Edit to add: Language and cultural barriers make it trickier still, so while we are here to learn a little and have some fun, the fun should not be at others' expense. Not trying to be preachy, but there it is.

-
This misunderstanding has been settled. All is good in MT.O land. Everyone stay calm. Stay CALM! FOR THE LOVE OF ALL THAT IS GOOD, PLEASE STAY CALM!!! :ahhh :ahhh :ahhh :ahhh
:D
And, fyi, it was an unusual 8oz can of worms. In mustard sauce...
And I used the forehead smash method, followed by letting a dog gnaw on it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
