The SAK Whittling Club
-
I do it a bit , usually use my Handyman . Results aren't all that great , but sometimes quite functional .
Chris
-
Count me in. I typically use a hiker or tinker for whittling or woodcarving if I just pick something up randomly or want to carry something in my pocket.
I do have another homemade detail blade and some scandis that I use for roughing just because of hand comfort.
-
I a very interested in starting to whittle. Can anyone describe or share a link of how to mod the small blade into a Wharnecliffe. Will I be shortening it for the new shape?
If you go to the link to the book in my first post, then click "Look Inside" you can read the pages in the book where he says how and why to change that blade into a Wharnecliffe shape.
What is the advantage of the Wharnecliffe over the sheeps foot blade found on my electrician?
The Wharnecliffe's sharper point will probably make it easier to cut around corners and in tight spots. The sheepsfoot might do OK though. I'd certainly try that out before grinding it down, as a Wharnecliffe blade is not as tough. If you're going to file or grind a blade down, I wouldn't do the Electrician's.
Basically, all you're going to do is to file it mostly flat on the cutting edge; remove the belly. Then, touch up the spine of the blade a bit until it comes to a sharp tip.
I looked through the book but couldn't find anything. Is there a page number?
-
@Thisjk38 said:
I looked through the book but couldn't find anything. Is there a page number?It wasn't the book I thought. It is on Pg. 2 of Whittling Twigs and Branches, which is available in the free sample.
Sorry for the bad reference.
-
Well, I saw this last night and thought I would start a spoon when I finished work tonight.
Got in, cooked the kids their tea, gave my super tinker a couple of swipes on the sharpmaker and then popped outside to commence work. All going well, then.......my super tinker bit me......and I'm still bleeding now

I'm not giving up though so count me in!
ATB, Jon.
-
Yesterday, I started off by going branch hunting.
I don't have my Hiker yet, so I brought my Soldier with me. Before breaking out the saw, I check the fallen limbs to make sure they're not too rotten.
*This one turned out to be not good:

This one passed the test, so out came the saw:

Today, I started in earnest. I beveled the wrong end of this. I need to keep the straight-ish part for the blade of the spreader. So I consider this a clean slate, as that will all be whittled away anyhow. :)

With lots of rough-cutting, the large blade on my Tinker came in handy. Too bad I did some "amateur welding" on it when I cut into a live cable, or this would have been easier:

After working for at least a solid hour, I started to get two blisters: one at the top of my palm by the pinky, and another one just above the first knuckle of the index finger. A Recruit will almost certainly be the better whittling knife than the Tinker, due to the back springs being flush with the liners on that one. Anyway, this will have to do for today:*

I was home with the kid today. Tomorrow, I'm going to pack this in my bag and take it to work. If it isn't terrible outside, I'll whittle during lunch. Maybe I'll get the blade done?
The Hiker and book are due to arrive tonight. I love Amazon Prime and their included 2-day shipping!
I also ordered a Recruit and the twigs and branches whittling book today.
-
@JDO330 said:
...All going well, then.......my super tinker bit me......and I'm still bleeding now
I'm not giving up though so count me in!
Yikes, sorry to hear that, Jon.
A tip in one of the books is to wear a glove in the hand that holds the workpiece, and at least wrap the thumb of the carving hand in some duct tape. First layer goes inside out, so you don't end up with the tape glue on your thumb. Next layer goes sticky side down.
Well better luck tomorrow.
-
I've been reading this thread, which I really shouldn't have. All of you are evil
! :D I just ordered the book from Amazon, and the local Target has Recruits in stock. Another excuse for a new SAK...... -
@jerseydevil said:
I've been reading this thread, which I really shouldn't have. All of you are evil
! :D I just ordered the book from Amazon, and the local Target has Recruits in stock. Another excuse for a new SAK......Well, I for one think it is a good excuse. Finally, we are doing something that will yield more than another SAK for the collection, right?
I just got the book, the Hiker, and a +B Yeoman moments ago. Gee, it is going to be hard to cut into this Hiker. It has that new SAK feel. No scratches, no friction, just mint and shiny...
I may wait until I receive the Recruit before I start re-purposing the Hiker.
-
I don't have any pics of any of my balsa whittling done with my recruit, but I have a few of my first whittling foray.
I call it the pseudo-spoon, which was made entirely with the BHK patch-knife shown.
After that I switched to using the SAK and mainly made (poorly ::)) little animals out of balsa.



-
@gustophersmob said:
I call it the pseudo-spoon, which was made entirely with the BHK patch-knife shown.Very cool. What is BHK, and why is it called a 'patch-knife?'
After that I switched to using the SAK and mainly made (poorly ::)) little animals out of balsa.
Well, show them! I don't know about anyone else, but I need to see someone else's poorly made stuff, or I'm going to think I'm the only one who makes things poorly.

-
This thread just reminded me I always wanted to carve the chain out of a hunk of wood, where the links are connected and free moving, all from one piece of wood. My grandparents had a long one hanging in their cabin, I always wanted to figure out how to make one.
-
BHK stands for blind horse knives, a custom knife company based out of Ohio. I met Dan, one of the guys who runs it at a gun show once, he was a really nice guy. I think that style of blade was originally used to cut cloth patches for muskets, hence the name, but I could be mistaken. I'll try ro get some more whittling pics up tomorrow.
-
So, my wife got home from work and saw my in-progress spreader.
She also saw the book, and Chris' spreader.
Then, she told me: "Honey, I think you might be using the wrong kind of wood, because yours looks really chunky." :-\
Of course, my only defense was: "Did you see the SIZE of his spreader? That would NEVER reach to the bottom of the mayo jar! Just wait...." :-[
-
I looked through the book but couldn't find anything. Is there a page number?
It wasn't the book I thought. It is on Pg. 2 of Whittling Twigs and Branches, which is available in the free sample.
Sorry for the bad reference.
Ok thanks for the link, really helps a lot, I get the idea now.
Does anyone think the pruning blase on a Pioneer Harvester Knife might be a good candidate to be turned in to a wharnecliiffe blade? I can not tell if the whole edge curves or not. If it doesn't then just the tip would need to be flattened out, and the back then reshaped. I only ask because I would love to have the saw, and awl on my whittling sak withought any tools on the backside to worry about.
-
Thisjk38: I think it would work well. But it'd be a bit of a shame to take the file to a collectible knife. (I don't think those are produced any more, right?)
Also, the grid pattern on the Alox might get abrasive to your hand after a while. Especially when you're in the material removal phase of a project.
-
@Smaug said:
Thisjk38: I think it would work well. But it'd be a bit of a shame to take the file to a collectible knife. (I don't think those are produced any more, right?)Also, the grid pattern on the Alox might get abrasive to your hand after a while. Especially when you're in the material removal phase of a project.
Its 25 on Amazon, so I guess it still is. I've been carrying around my electrician and using it quite a bit and don't feel the texture as a problem. Then again I haven't used it more than a few minutes at a time. What do others think? Is a the alox to rough to whittling with?
-
Vic makes an electrician plus with the small sheepsfoot blade and a saw. Probably easier than trying to reshape the pruning blade
-
Personally, I don't consider the electrician blade a good option for carving...although it could be used. I has the single-sided grind like a gardener...unlike the pruning blade which has a thinner symmetrical grind like a pen blade.
You won't be able to "wharnecliffe" the pruning blade because the nail nick is too close to the end. There's not enough room to taper the spine down into a point. The best you'd be able to do is straighten the edge into a psuedo sheepsfoot.
The checkering on alox scales is not very aggressive. I don't experience problems with extended handling.

-
@JDO330 said:
...All going well, then.......my super tinker bit me......and I'm still bleeding now

I'm not giving up though so count me in!
Yikes, sorry to hear that, Jon.
A tip in one of the books is to wear a glove in the hand that holds the workpiece, and at least wrap the thumb of the carving hand in some duct tape. First layer goes inside out, so you don't end up with the tape glue on your thumb. Next layer goes sticky side down.
Well better luck tomorrow.
I definitely agree with the glove and thumb guard. The glove will only protect against slicing, not stab wounds. Rotokid has some if you need them.
The thumb guard on the knife hand actually protects you more from nerve damage from pressing down rather than cuts towards yourself.
Sent from my MB860 using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login