The SAK Whittling Club
-
@gustophersmob said:
I call it the pseudo-spoon, which was made entirely with the BHK patch-knife shown.Very cool. What is BHK, and why is it called a 'patch-knife?'
After that I switched to using the SAK and mainly made (poorly ::)) little animals out of balsa.
Well, show them! I don't know about anyone else, but I need to see someone else's poorly made stuff, or I'm going to think I'm the only one who makes things poorly.

-
This thread just reminded me I always wanted to carve the chain out of a hunk of wood, where the links are connected and free moving, all from one piece of wood. My grandparents had a long one hanging in their cabin, I always wanted to figure out how to make one.
-
BHK stands for blind horse knives, a custom knife company based out of Ohio. I met Dan, one of the guys who runs it at a gun show once, he was a really nice guy. I think that style of blade was originally used to cut cloth patches for muskets, hence the name, but I could be mistaken. I'll try ro get some more whittling pics up tomorrow.
-
So, my wife got home from work and saw my in-progress spreader.
She also saw the book, and Chris' spreader.
Then, she told me: "Honey, I think you might be using the wrong kind of wood, because yours looks really chunky." :-\
Of course, my only defense was: "Did you see the SIZE of his spreader? That would NEVER reach to the bottom of the mayo jar! Just wait...." :-[
-
I looked through the book but couldn't find anything. Is there a page number?
It wasn't the book I thought. It is on Pg. 2 of Whittling Twigs and Branches, which is available in the free sample.
Sorry for the bad reference.
Ok thanks for the link, really helps a lot, I get the idea now.
Does anyone think the pruning blase on a Pioneer Harvester Knife might be a good candidate to be turned in to a wharnecliiffe blade? I can not tell if the whole edge curves or not. If it doesn't then just the tip would need to be flattened out, and the back then reshaped. I only ask because I would love to have the saw, and awl on my whittling sak withought any tools on the backside to worry about.
-
Thisjk38: I think it would work well. But it'd be a bit of a shame to take the file to a collectible knife. (I don't think those are produced any more, right?)
Also, the grid pattern on the Alox might get abrasive to your hand after a while. Especially when you're in the material removal phase of a project.
-
@Smaug said:
Thisjk38: I think it would work well. But it'd be a bit of a shame to take the file to a collectible knife. (I don't think those are produced any more, right?)Also, the grid pattern on the Alox might get abrasive to your hand after a while. Especially when you're in the material removal phase of a project.
Its 25 on Amazon, so I guess it still is. I've been carrying around my electrician and using it quite a bit and don't feel the texture as a problem. Then again I haven't used it more than a few minutes at a time. What do others think? Is a the alox to rough to whittling with?
-
Vic makes an electrician plus with the small sheepsfoot blade and a saw. Probably easier than trying to reshape the pruning blade
-
Personally, I don't consider the electrician blade a good option for carving...although it could be used. I has the single-sided grind like a gardener...unlike the pruning blade which has a thinner symmetrical grind like a pen blade.
You won't be able to "wharnecliffe" the pruning blade because the nail nick is too close to the end. There's not enough room to taper the spine down into a point. The best you'd be able to do is straighten the edge into a psuedo sheepsfoot.
The checkering on alox scales is not very aggressive. I don't experience problems with extended handling.

-
...All going well, then.......my super tinker bit me......and I'm still bleeding now

I'm not giving up though so count me in!
Yikes, sorry to hear that, Jon.
A tip in one of the books is to wear a glove in the hand that holds the workpiece, and at least wrap the thumb of the carving hand in some duct tape. First layer goes inside out, so you don't end up with the tape glue on your thumb. Next layer goes sticky side down.
Well better luck tomorrow.
I definitely agree with the glove and thumb guard. The glove will only protect against slicing, not stab wounds. Rotokid has some if you need them.
The thumb guard on the knife hand actually protects you more from nerve damage from pressing down rather than cuts towards yourself.
Sent from my MB860 using Tapatalk 2
-
@Syph007 said:
This thread just reminded me I always wanted to carve the chain out of a hunk of wood, where the links are connected and free moving, all from one piece of wood. My grandparents had a long one hanging in their cabin, I always wanted to figure out how to make one.It's tricky but not near as tricky as the ball in the box. I did a three link chain I'll try and post a pic when I get home.
Sent from my MB860 using Tapatalk 2
-
An old project -

-
What kind of wood is best for beginners?
-
I reckon something like pine is pretty good as its nice and soft.
Regards, Jon.
-
I am currenty whittling with the small blade (unmodified) on the Spartan and i want to have a woodsaw and get rid of the corkscrew bugging :P
So I am between a hiker and a harvester (have a soft spot for the alox SAKs) do you think that I will be able to get the pruning blade modded as easily as the small blade?
Which of the 2 do you think is the best choice? -
@volbu said:
I am currenty whittling with the small blade (unmodified) on the Spartan and i want to have a woodsaw and get rid of the corkscrew bugging :PYou could add the eyeglass screwdriver to the corkscrew, and that would probably alleviate the comfort issues with the corkscrew to some extent.
So I am between a hiker and a harvester (have a soft spot for the alox SAKs) do you think that I will be able to get the pruning blade modded as easily as the small blade?
Yes.
Which of the 2 do you think is the best choice?
(edited) That's a tough call. The Harvester has the smooth backsprings, which is a real plus, and the inline awl, which is better. But I feel like the more textured scales may rub your hand raw during the stock removal periods of whittling.
Get the Harvester, and wear gloves when you're doing the stock removal. ;)
Or get a Recruit, and forget the awl. Or grind one of the openers into an inline awl. :)
-
@JDO330 said:
I reckon something like pine is pretty good as its nice and soft.One has to watch out for sap/pitch with pine, also knots.
I know from woodworking, the problem with pine is that I can select a piece that looks clear, and only after cutting into it do I find out there's a pocket of sap. It's bad enough to find that after table-sawing it, and having to clean it off each of the teeth after it burns on. But to spend hours whittling, then finding a hole in the middle of the workpiece that makes completion impossible....

-
@Spork, Lord of Lime Jello! said:
Personally, I don't consider the electrician blade a good option for carving...although it could be used. I has the single-sided grind like a gardener...unlike the pruning blade which has a thinner symmetrical grind like a pen blade.You won't be able to "wharnecliffe" the pruning blade because the nail nick is too close to the end. There's not enough room to taper the spine down into a point. The best you'd be able to do is straighten the edge into a psuedo sheepsfoot.
The checkering on alox scales is not very aggressive. I don't experience problems with extended handling.
Ahh, I'd forgotten that the electrician's blade had a chisel grind.
-
Almost done with the spreader.
Here's where I whittled yesterday during lunch at work:

I got the Recruit in the mail today. It is indeed more comfortable than the Hiker or Tinker, on account of the smooth back and scales.
I dremeled the small blade into a Wharnecliffe shape, and spent probably 2 hours sharpening it again. First, I used one of those carbide "V" sharpeners to remove some metal fast and get it resembling an edge again. Then, I used the coarse diamond stones on my Sharpmaker and ground it at 30 degrees. It's not that durable, I could see where the edge was bent over just from whittling on Whew, that was a lot of work.
I decided to get a little tricky with the can opener. I ground off the screwdriver tip, then ground the 1/4 circle nice and sharp. Then, I figured: "I will cut off the can opener hook and grind the bottom sharp too, to use as a draw knife, like the orange peeler on the MiniChamp."
Little did I know that the blade stops closing by indexing on that can opener hook. So when I closed the newly-modded can opener, it went clear into the knife handle and tools would need to be used to get it out now. Not only that, but the bottle opener goes too far in now too. So don't do that, if you decide to get tricky and re-purpose the can-opener.
*Looks good so far, right?

Wrong. :( *

So this knife is pretty much ruined for anything but whittling now. I'm glad they're only twenty bones.
The spreader's done now, except for the final sanding. Nevertheless, I had to give it a "field test" to spread mayo and mustard on some open face crisp bread sandwiches:


Just got another Tinker and a Sportsman in the mail. The Tinker replaces the one I did some "amateur welding" on the blade years ago.
The Sportsman, I'll talk about in the "What's your latest SAK" thread.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login