Can openers: Times on the #10
-
I believe everyone saw a 40 sec can opening with the Vic Farmer (with an experienced opener ::))
The Wave time is quite good. I'm surprised it was that short, but yes, the locking tool makes a big difference. That's the problem with Wengers on the big cans. The opener folds shut due to the lid catching it.
With practice, the Vic opener slides along, as if it were an arc from a dedicated crank can opener. It moves along in a sliding/rocking fashion (like a sinusoidal wave rather than as separate strokes--ie it cuts on both the up and down motion).
Add a little Sarachi sauce and you're good to go!
Good test!
-
Great test Lynn! Very interesting results too! I give LM respect for the dual purpose opener, not great with bottles or cans but can handle both in a pinch. The screwdriver on the Vic is not my favourite, I'd rather a dedicated driver and 86 the can opener altogether.
Stay multi my friends
-
I think these tests put to rest the notion that other (non-vic) can openers were orders of magnitude slower. For me, in fact, The vic was very middle of the road.
I personally found the back-cutting can openers much more natural to use. I've got to wonder if being left-handed affects that. So if someone wants to go drop a chunk of money to do further testing, please feel free, and post your times.
Mr. Whippy, I think you make a very good point about the locking tool on the Leatherman. I don't know what the tool retention is like on Wengers, but if the tool retention was as good on the Sheffield as it is on my Tinker, I doubt it would have been a problem. The tool retention on that side of my Sheffield is very weak. I'd have to get ... sigh... another MT from Wenger to test THEIR can opener.
If I had another can, I'd give the PST a try, but those things run about $5 apiece, and I only survived purchasing them when i showed my hubby it was basically the same cost as buying an equal volume in smaller cans. And now our freezer is stuffed with chili beans.
As for Sriracha... that is the answer to EVERY food issue. :D
A final point that I've mentioned before: The Swing-A-Way was the older (built like a tank) model. Mr. Whippy has stated that he's had problems with crank can openers in the past getting wrecked quickly on #10 cans. The current offerings for Swing-A-Way were not built to the same standards as mine, and a more accurate comparable crank opener would probably be the EZ-DUZ-IT can opener. You can find it by typing 'Made in USA Can Opener' in a search on Amazon. However, that's not what I tested, and I make no claims as to how well it will perform.
I'm suspending my testing at this point, as I'm satisfied that I answered all the questions I had on this matter. I am more than willing to continue if folks want to start sending me funds for huge cans of food I'll never be able to consume.
So... what? Saws next?
-
Someone change her title to "can opener obsessed". :ahhh
-
I'm just trying to wrap my head around shoveling down a No.10 can of chili :ahhh :D
-
@Spork, Lord of Lime Jello! said:
I'm just trying to wrap my head around shoveling down a No.10 can of chili :ahhh :DI shoveled down 1/6 of one of the cans. And there are still... side effects. And, it's not even chili... it's just chili beans! Agggg!!! The lengths I go to for insane testing! Now, as I said, my freezer is full of zip-lock bags of chili beans portioned into 15oz servings. So, no need to buy more for... emm.. (do some math)... forever.
EDIT: Funny side note. The only two products in #10 cans that were in my local grocery store were these chili beans, and cans of green beans. Mr. Whippy's dieting dogs would have loved the options. :D
-
Soooo.... I used the can opener on my SOG PPP, which is the same as the can opener on the PowerLock (minus the locking part). This was not a #10 can; just a normal-sized can of beans.
:o :o :o
Oh my, but that thing is useless! I gave up about 1/4 of the way around the can when the opener began to bend the side of the can so badly that I was afraid I'd spill the contents. I have been using LM openers for years without much trouble, and I used the Vic and Boy Scout openers before that. The SOG version was not at all impressive.
-
This should also put to rest the silly notion that keeps popping up: that a Vic can opener is just as fast as a good dedicated can opener like the Swing-A-Way.
-
@smiller43147 said:
This should also put to rest the silly notion that keeps popping up: that a Vic can opener is just as fast as a good dedicated can opener like the Swing-A-Way.Hmm...
Devil's advocate: I can open a #10 can with a vic in less than 1/2 the time posted here. However, what I will say is:
Using the new OXO can opener, I could open a #10 can slightly faster (10-15 sec faster, so around 25-30 sec). It had problems too, mostly where it pushed the metal down without cutting it, requiring a couple more passes in a couple of places.
The effort required to open the can was much less than a Vic tool.
That is as far as I'm willing to concede. (ie, a higher end dedicated can opener is marginally faster and significantly easier than a Vic).
-
I think we could ALL agree that the best answer for both speed and fail-safe operation would be to have both. See? I CAN be diplomatic!

-
I guess its a speed of the operator thing as well then, im going to time me using my PT's can opener and my tinkers as a comparison ,although off to work now :D

-
Any thoughts on using the kitchen can openers/knife sharpeners? I found one quite handy in my kitchen for putting a quick edge on a knife.

-
I use a Zwilling Twinsharp knife sharpener. No power needed. A few passes brings back the edge just fine.
Also, I probably should have put this in this thread. The #10 can tests were part of a larger discussion on can openers in general. Here's a link to that 'main' thread, which links to time tests on both this thread and a thread on 15oz can testing.
</topic/36802
-
@Landrew said:
Any thoughts on using the kitchen can openers/knife sharpeners? I found one quite handy in my kitchen for putting a quick edge on a knife.
The older combo can opener/sharpeners were renowned for overheating the blades and being too aggressive in metal removal. I received an electric knife sharpener from my brother a few years ago and found it was quite good at removing big chips quickly and putting a reasonable edge on the blade. Finishing on a Sharpmaker tuned the blade edge nicely.
In short: I'd be very careful using a non-dedicated electric knife sharpener.
-
I bought an old Leatherman PST original with a broken off blade tip. A little careful work on the power grindstone put the point back to where you probably couldn't tell it from the original without measuring it. The secret was to use short presses on the grinding wheel, allowing it to cool between each pass. No heat discoloration at all.
-
I must be missing something again....compairing apples (swing-a-way) to oranges (multitools)? Is the Tinker 84 or 91mm?
Farmer canopener clearly wins from my experience, it's fastest, long lasting, smooth push cutting, save, no metal shavings,
and above all you can put it in your pocket ::) -
No, the test was comparing can openers to can openers. I had used the Swing-Away as a control, but it was suggested by someone that the victorinox SAK was the best can opener... period (specifically for these big cans).
The Tinker I used was a regular 91mm.
I have since tested the Tinker Small and Farmer. My preference among them is the Tinker Small, because it weighs least, and semees easiest to use. In theory, the thicker stock of the 93mm line should make can opening slightly more difficult, but I didn't notice any difference in practice compared to a 91mm. Although I've never run one vic against another, it's an interesting idea for a test.
-
@Lynn LeFey said:
No, the test was comparing can openers to can openers. I had used the Swing-Away as a control, but it was suggested by someone that the victorinox SAK was the best can opener... period (specifically for these big cans).The Tinker I used was a regular 91mm.
I have since tested the Tinker Small and Farmer. My preference among them is the Tinker Small, because it weighs least, and semees easiest to use. In theory, the thicker stock of the 93mm line should make can opening slightly more difficult, but I didn't notice any difference in practice compared to a 91mm. Although I've never run one vic against another, it's an interesting idea for a test.
I hear my memory being invoked...
As an update, I'm on my second Swing Away can opener for the #10 cans. The first one became wobbly in the gear and wouldn't hold on the can edge anymore. I went back to my Vic Farmer (same one) to open the #10 cans. Although the Swing Away is faster (and a bit easier on the hand--but not by much), It's cheaper for me to occasionally touch up the Farmer can opener on a wet stone than buy new can openers every 8 months or so...

-
Yeah, and every tool on the Farmer is top notch (best handle too, beside that sharp eyelet) :D
Edit: I feel the 93 canopener works better then the 84mm because of the larger rake.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login