Modding a Rebar questions
-
He has to clarify for all those
suspension ownersMultitool beginners that may be reading. -
-
@diracismyhero said:
Very helpful thread! I just wanted to comment on the cutout that would be necessary for the scissors. If I understand this correctly, in order for the scissors to sit flush when they are closed, the notch needed in them would have to be made right on the cutting edge of the scissors, because the scissors would be in the fully open position as apposed to the closed position as shown?Ben
Hi Ben,
yes, the scissors are closed in the photo, but the clearance notch would have to be made right where I've indicated with the white circle.

-
Since, when the scissors are folded into the tool, they are in the fully open position, would the necessary clearance notch cut into the cutting edge of the scissor blade?
-
It would appear that the only protrusion above the handle is the nail nick, is there a way to remove what's needed and retain any portion of the nail nick, or would that leave the thumb tab in the way of the pliers?
-

@Mercury said:
It would appear that the only protrusion above the handle is the nail nick, is there a way to remove what's needed and retain any portion of the nail nick, or would that leave the thumb tab in the way of the pliers?You guessed it, the scissor thumb tab would then unfortunately be in the way of the plier jaws, preventing the tool from folding up completely. :-\
-
@MedusaOblongata said:
Since, when the scissors are folded into the tool, they are in the fully open position, would the necessary clearance notch cut into the cutting edge of the scissor blade?Eek!! How did I miss that?! :P Good spot Medusa


Unfortunately, I'm afraid this pretty well kills the idea of modding Fuse/Blast scissors into a Reber. :'( Now we'll probably have to wait and hope Leatherman makes a special scissor for the Rebar with a longer shank. :-\
-
What if you moved the scissors to fill the spot where the lanyard ring and the medium driver fit (with a washer of course)? Then you could put the medium driver where the file is or retain the file but the scissors won't have any issues with anything.
-
@Mercury said:
What if you moved the scissors to fill the spot where the lanyard ring and the medium driver fit (with a washer of course)? Then you could put the medium driver where the file is or retain the file but the scissors won't have any issues with anything.So in other words put the scissors more towards the center of the tool? Yeah, I thought about that. It would get them away from the lock-bar pivots, which is good. But now I'm worried they would hit the lock bar return spring, which sticks up somewhat (shown just to the left of the "AO1" in this picture:

-
That's a valid concern, and I don't think there's much that can be done about it. LM had to make the tips of those springs round due to a large amount of warranty issues due to them breaking, so while grinding a crescent off of one side would work, it would weaken the spring. They were breaking left and right on Core and Blast models.
-
Well bugger it then!
-
@Mercury said:
That's a valid concern, and I don't think there's much that can be done about it. LM had to make the tips of those springs round due to a large amount of warranty issues due to them breaking, so while grinding a crescent off of one side would work, it would weaken the spring. They were breaking left and right on Core and Blast models.Living in a town with a large metal stamping plant, I've had a few discussions with friends from there over a beer or two on this issue.
Two possibilities:
First: The reason for the round tip was to relieve stress at the base of the lock spring during initial stamping. Of all the Cores that I have had break, all of the springs broke off at the base of the lock spring. Looking at the break under a high powered lens, it shows that there was a long existing micro fracture that built up corrosion and led to the eventual breaking of the spring.
By adding the circular tab at the end to the spring (as apposed to a squared off tip), it forces the greater pressure of the press's die to concentrate most of the force on the larger surface area of the end, thus reliving stress on the base and preventing fracturing.
Second: A certain amount of micro fracturing cannot be avoided during the stamping process, so a rounded shape was added at the end of the spring to evenly distribute the force during day-to-day use, thus avoiding stress on any existing micro fracture and dramatically increasing the durability of the otherwise imperfect spring.
If the second reason is true, then any modifications to the end of the spring could quite likely lead to premature failure of some.
-

Awesome answer.
-
I have 2 BO Rebars from Steve.
1 to take apart....
1 to keep.
Soon, my dream compact tool will be realized. BO Wave, Rebar head, 154cm blade...
-

Awesome answer.
Take it with a grain of salt, like I said it was a discussion over beer, so there was a lot of "You don't know what you're smurfing talking about" going back-and-forth...
Those conversations are the best!!
@Metropolicity said:
I have 2 BO Rebars from Steve.1 to take apart....
1 to keep.
Soon, my dream compact tool will be realized. BO Wave, Rebar head, 154cm blade...
You must do a thread on that one!
-
Just waiting on them from Steve, they shipped on monday
I HOPE it's a direct swap..although my tools are put away for the move across the country.
I'll see about doing a thread but to do it properly takes time :)
-
Well I suppose that's reasonable.
-
How do you line up the tools & those ever-so-thin washers when putting the bolt back in?
I mangled a small washer between the small bit driver and the scissors on my Charge TTi. Thought I had it lined up but then it fell out. So now when I open the scissors the small bit driver clusters out too. :(Had heard of a wooden jig that Leatherman furnished to overseas repair facilities/shops, but I have yet to see what it looks like.
Had pulled an awl from an ST300 and put in my TTi as I hated carrying all that weight just for an awl.
One would figure after all these years Leatherman would have gotten a hint for at least a limited edition Charge model with an awl in it. Maybe they will get it right with Rebar'ish pliers?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login