Lanyard ring.
-
Never have used it while carrying a sheathed MT, but I have used the keyring on my 111mm vic with a paracord lanyard attached to a belt loop, while carrying it in my pocket.
-
THe only full size Multis I use a lanyard ring on are my Juices(S2 and KF4)The KF4 gets a full length paracord lanyard too,as it disapears into my Skinth,and I cant get my fingers to it ;)
-
I'm a recent convert to lanyards on SAKs. Now that I've tried it I've found it indispensable. All of my SAKs have a lanyard attached. Getting it out of the pocket is so much easier with them.
-
-
One thing my backpacking SwissChamp doesn't have is a light. But it does - an LED on the lanyard ring.

-
Oddly I'm fine with having a 'fob' type thing on SAKs or tiny MT's such as the Squirt, but I've never once felt the need for either a fob or a lanyard on a full sized MT.

-
@Gareth said:
Oddly I'm fine with having a 'fob' type thing on SAKs or tiny MT's such as the Squirt, but I've never once felt the need for either a fob or a lanyard on a full sized MT.
OK, I now need to eat humble pie. :-[ I was working to sort out a window that a guest had reported that she couldn't get to close. Normally this is a easy fix, but this time I found myself having to work on the window, while it was open, four stories up, over a moderately busy street. So to give myself a little peace of mind I quickly knocked up a wrist lanyard to hold my MP600 while I was working. I will say that I cut it off just as soon as I was done, but I was grateful it was there at the time.
-
Yes and no
Sent from Ash forum mobile
-
Here comes a really vague answer: Depends. :)
I don't keep a lanyard on any of my MTs full-time, but I will use one if I need to work high above the ground, or over water, or anywhere else where dropping the tool would make me seriously unhappy. So I make sure whatever multi from my rotation I'm carrying has accommodation for a lanyard.
My EDC rotation is pretty small these days: I always have the Charge Ti in my Suburban Assault Bag, and sometimes carry either a PST-II or SwissTool Spirit on my belt. There's also always a decent clip-on lanyard in the bag, too.
The Spirit doesn't have a lanyard loop, but I can clip to the corkscrew slot in the frame.
The PST-II has that tiny loop at the pivot; I added a 4mm split ring there for cliping the lanyard.
On the Charge, I do NOT trust the lanyard ring that fits into the clip slot; it's waaaaay too easy to put a little pressure on the lock bar and WHOOPS there goes the lanyard loop. Instead, I use the Super Secret Hidden Lanyard Loop built into the handle, and like the PST-II, put a split ring through it so it doesn't slip back into it's slot on me.
-
Amici,
I utilize a lanyard on all of my 85, 91, and 111mm SAKs for a host of reasons. Number one is as a way of locating them if I were to drop or misplace one whilst out in the field where the change of seasons makes this a reality. Two regarding my 111mm tools that are black nylon scaled (see reason #1), for the ease of withdrawing them from either my front or rear pockets. I keep the lanyard hanging out so all I need to do is grab it and bang!, the tool is ready to go.Lastly, I think a lanyard simply just looks cool. Nothing screams SAK individualism than a lanyard. Scales can be changed sure, but a lanyard, especially if you've created it yourself says it all about you and how that SAK or folder is yours.
Cheers,
Serge -
Never. Most useless feature ever.
I can barely even imagine it being useful, and even that is a stretch.
-
I always use them, it's a deal breaker if a tool doesn't come with a lanyard attachment point for me :)
-
I like them , nothing elaborate , just a paracord thumb loop .
Chris
-
Anyone uses a lanyard on the Vinox Spirit?
I am thinking that the cork screw attachment point (hole!) could be used for a lanyard..

-
Mike, Gryffin, if you could share a photo ..

my imagination and creativity is very restricted. i am a man poor. :ahhh
-
Yes for a SAK in my pocket or bag, just for ease of finding the tool.
No for full size MT whilst on ground level.
Yes for full size MT whilst at height. For this situation I would use a wrist type lanyard to stop the MT landing on someones head.
-
Yep, always. I do similar to previously mentioned. If I'm carrying a 91 or 111mm SAK it will always have a lanyard simply to keep the knife verticle and comfortable in my front right pocket. Mine are nothing special, just a long ish loop with a simple knot. I slip the knife in my pocket and tuck the knot under my belt. Works for me.
Atb, Jon.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
