Do you use two layers models?
-
Spartan a lot of time,the awl/blade/flatdriver are my most used tools actually...and that opener also does a great job on some phillips

+++++you can save the night with the corkscrew
-
Hello,
I have a Midnight Manager in my pocket 24/7 and also carry a Tinker or an Alox Pioneer in my jacket pocket most days.
The Midnight Manager is amazingly useful for such a small knife/tool, I could quite happily carry this fella as my only tool.
But I won't! Heh heh!
-
Big fan of the 2-layer SAKs. Tinker the most, but also Soldier, Scientist, and Pocket Pal. For me, slim is in.
--Larry
-
Yep tinker for me too, great little SAK and i prefer the phillips to the CS, unless on the explorer as that has the inline phillips and the CS is handy for the eyeglass driver ;)
-
@EddieEnzyme said:
I have a Midnight Manager in my pocket 24/7Now THAT is impressive. You must keep it in your pajama pockets while sleeping then? And you wear clothes into the shower too? I won't even comment on lovemaking... :D
-
@50ft-trad said:
I have less use in my day to day life for a quick access blade than I do for the opener layer tools.
My daily carry at work is a cadet, and I use the drivers quite a bit, and the can opener for pulling staples. The blade is primarily for eating my apple and orange in a more "civilized" manner ;)
I do wish there was an option for a SAK like tool with a OHO blade, but with tools for when you need them. Something like a smaller sized OHT.
I've tried things like the LM wave, but I didn't gel with the tools. The bits were too short, and all tools were almost impossible for me to deploy without using something to pry them out (something I've experienced on every single newer LM I've tried, with the exception of the skeletool...)
Because I haven't come across something that is a good blend of both features, I've stuck with the cadet or alox soldier for carry.
Sounds to me like you need to try a Buck X-Tract

@Neil said:
Al's got a good point. The X-Tract is one of those MTs that didn't appeal until I got to handle one. They really are quite impressive.Its a locker, so not something I'd buy to carry over here unfortunately. But if I lived elsewhere I'd own one.
Thanks for the tip, I always had the impression it was a large tool like the OHT. I need to check it out more closely.

-
I have a Midnight Manager in my pocket 24/7
Now THAT is impressive. You must keep it in your pajama pockets while sleeping then? And you wear clothes into the shower too? I won't even comment on lovemaking... :D
It's always in my pocket but I didn't say where the trousers were ;) :D
-
@jzmtl said:
On the two layers models, you don't really gain many useful functions compare with a regular folder, you get the openers, but really how often do they get used?Are you kidding me!? We don't even own a normal can opener in my house, the SAK opener is the only way we open our tins! Likewise bottles of beer! I EDC a farmer, but the saw only ever sees action in the woods, so I'd happily go down to a pioneer/soldier.
-
Two layer SAKs that I own and love are; Vic Compact, Sportsman, Scientist, Cadet, Wenger Commander and SI.
-
Amici,
Don't use anything that small. All by SAK models are a 4 to 8 layer minimum.. I say go with the gusto!Cheers,
Serge -
I'd kill for a reintroduction of the Scientist. A Phillips driver is one thing I'd like to have handy, even though the SD tip on the Classic works VERY well as a 2D Phillips. That, plus the great spearpoint blade would make me a happy camper. Not much else outside those two tools and scissors gets used in my day to day.
-
I love my modded Scientist. Knife, bottle opener, can opener, flat screwdriver, awesome in-line phillips driver, magnifying glass, corkscrew, eyeglass screwdriver, pen, straight pin, toothpick, tweezers. That's a heck of a lot of utility in a tiny package. I carry it quite a bit. It's a great tool to have for urban leisure environments like making dinner and having drinks at a friend's place.
-
@50ft-trad said:
My first SAK was a Tourist. Still got it, and it does come out to play occasionally.
I really like my 91mm Compact and 84mm Golfer, and the only reason I don't carry my Timekeeper is I don't want to damage the timepiece.
I do have other 2 layer SAKs, but they don't get much glory, purely due to lack of scissorsForgot to add the D of E
-
Blades tend to be my least used tools on a SAK,Good 2 layer models?Tinker,Compact,DofE,Mech Junior...
Tend to go bigger now,but thats more showing off than anything else
-
I'm partial to a Farmer and a new Soldier/OHT, but far and away my favourite EDC is my blue Pioneer (see my avatar).
The tools do double duty in many cases:
-main blade does everything a blade should do, and I keep it sharp by stropping against my jeans after use.
-the awl pokes holes, cuts tape, lights ferrocerium rods and cleans burrs out of holes
-the big screwdriver/bottle opener is a great mini pry tool
-the tin opener opens tins in the kitchen (down here in darkest Africa we still get about half our tins without pull rings) and the screwdriver works as a phillips driver in a pinchI have a Swisschamp, and I admire the engineering. But I can't help thinking that the next logical step up from a light, well considered toolset is a kitchen sink approach. If I need more than I get out of my Pioneer, I carry a Swisstool
-
I usually carry Spartan or a Tinker.
I hardly feel them in my pocket, due to the slim and light design, and they have the tools i need the most in my everyday life: knife, screwdrivers, bottle and canopener.
(I am thinking of buying a Pioneer to use as a EDC, but I am wooried it might feel to big and heavy in my pocket.
)
If I need any other tools than that I have a LM Wave in the car. -
My most frequently carried (and used) SAK is my Executive. I'm not sure it counts though, because while it is two layers, they're double sided because it's a 74 mm frame.
My favorite true, two layer model is my Compact, although my Exec typically beats it out for pocket EDC because of the nail file.
After those, I probably EDC my Work Champ most often, typically when camping or working in the yard or garage though.
I don't have many SAKs that are in the 5 - 6 layer range... I tend to carry/use either the thinner and smaller ones, or the full size kitchen sink models. Usually, ones that are 2 - 4 layers are the ones I carry most often.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login