What Did You Use Your Multitool For Today?
-
Used my Style PS to pull the plastic seal off the salsa. Then used it to open a bottle of beer. The opener chipped the bottle! :(
-
Using a SwissTool to assemble the wife's new propane grill. 3.42410 Phillips screws and the driver is handling it well

-
Used my Leatherman Style CS for nail trimming today

-
Used the SwissChamp to make a whistle.
A nice passtime on a sunny day :)

-
I was at a barbecue earlier, and nobody had a can opener! Nobody, that is, except for the two that I had on me. :) Wenger Evo16 and a P-51 each did the job nicely.
-
I just used my rebar and charge TTi to tear down a keycard lock and replace it's innards. Both tools worked wonders, but the Rebar really performed well, it surprised me a bit.
-
Adjusting 'lofty' today, Used my Electrician doing some work on the sheath


-
Amici,
I used the pliers from a Victorinox Craftsman and a Wenger S557 to bend a small chain link back together that had somehow separated apart.Cheers,
Serge -
Used the awl on the Trekker to make holes in a new wood-gas stove. Used the Sheffield 12010 to handle sharp edges of cans while making the wood-gas stove. Then, I used the Trekker's blade and saw to cut wood to fill the stove for first testing. The stove works great.
-
Used the large blade on my deluxe tinker and a signal mirror while sitting at my desk to shave a small patch of whiskers under my nose that I had missed when shaving.
Sent from my MB860
-
I replaced the lace on one of my 3 y.o. daughter's boots. It was actually a bit of work... they are Keens and have the elastic laces that are fixed into the shoe. Used my Compact to remove the laces from the lanyard lock that held them together, and my Skeletool to press the lock back together after installing the new lace. Had to use a pair of hemostats to pull the new lace through the very tiny holes on the shoe for the lace.
-
Used my Victorinox Spirit to pull a piece of nail out of the left rear tire of my car, luckily it didn't puncture it (at least I think it didn't, I'll check it again tomorow morning just to make sure ... ::)).
No way I could have pulled it out by hand, it sat horizontal in a groove of the tyre, but the Spirit got it out in no time 8).
-
Just used my TTi to shape a coathanger so i could help someone get into their car, of course the keys were in the ignition. Silly teenagers, when will they learn?
-
Used my Skeletool to tighten up a mirror on a motorcycle , opposite threads are a real pain >:D, did the job fine , but not good for the chrome , so must start to carry a wrench. Which I have just seen the logic of , thanks to this forum :).
-
Used my TTi to take the cover off my A/C condenser. Coils were pretty dirty(clogged really) so i hosed them off, but the unit still isn't cooling the house. My A/C skills are minimal so I guess a call to a technician is in order, my wife and mother in law can't stand the heat!
-
Today I used my mum's SOG Powerlock's saw to remove a dead branch; it worked surprisingly well.
-
I WOULD have used my Cool Tool to tighten the my handlebars after a fall, but I forgot to put it in my seat bag.

-
Used my Spirit X to disassemble my desktop speakers at work so I could resolder the headphone jack connector because the solder joints were bad. The philips driver worked well.
Someone had brought in their soldering iron so it saved me from bringingthem home this weekend. Resoldered the connections and reassembled.
Sent from my MB860
-
Used the spirit x to re-tighten a door handle. Can opener/small screwdriver did it's job. :)
-
today I was at a picnic. A whole bunch of us are smokers, but there wasn't a butt can/ashtray in sight! took a couple of empty soda cans and used the can opener on my Evo16 to cut the tops off. Problem solved!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login