The Wingman has been shot down!
-
Mayne not all of me but my left foot has a good chunk of it!
Def
Sent from my MB860 using Tapatalk 2
-
-
@Syph007 said:
Complain all you want about slippery drivers, but that polish is there for a reason, and its to provide no micro nicks for rust to even think about grabbing hold of.I still like and use leathermans too, but I wish they'd use better steel.
I totally agree with you

Grant, that really is a sorry looking tool dude!
-
@Grant Lamontagne said:
How many of you regularly spray down your monkey wrenches after each use?Mine get enough motor oil and grease on them it's like they are constantly being oiled. :D
Maybe you should try some of that ceracoat stuff, consider wingman is already much more polished compare to other LM, pretty much as slick as swisstool.
Or some tuff cloth, people use them always praise how they keep protecting even long after application.
-
That is tragic man. I'm sorry to see that it rusted on you. On the plus side, I won't cost $100 to replace.
Maybe it's time for Leatherman to look into using some H1 steel (a la Spyderco and Benchmade in some of their blades). I wonder if H1 would work well or be cost efficient in a multitool form factor? It presumably wouldn't rust.
I've always had a gut feeling that the shiny Vic Spirit steel would do well in a more humid or corrosive environment.
-
Just yo emphasize some details here- this tool is still functional. It needs to he cleaned and oiled but I doubt there is any permanent damage, so I won't be replacing it or sending it in for repair or replacement.
The reason this is going off duty is because prolonged use in my environment would be detrimental to it. Being on my work vest it gets exposed to sea air, salt spray, heavy rains, wind, snow and radical temperature shifts. And, unlike a tool kept safely in the sheath under a coat, it's right out in the open getting wet, getting sprayed, heating up in the sunshine and cooling down in the wind. This is something of an extreme situation for a tool.
That having been said, the Wingman, regardless of treatment has failed me as an EDC model. That isn't to say its a bad tool or that people should avoid it or Leatherman sucks or anything like that. Yes, I could try Tuff Cloth, yes, I could spray it with oil every night or I could keep it in a temperature controlled humidor and sing softly to it before I go to bed.
What I am saying is that this tool is simply not the right one for this application or circumstances. I am disappointed in it but these things happen. For folks who want a tool they don't have to think about or baby, this may not be your thing. I want a tool that can stand up to what I do on a daily basis and I don't have to worry about it- and it has to be ready when I am. It's a good thing I didn't need the blade today though..... of course if I did then I could have just reached for my Compact- after all, two is one, right?
Def
Sent from my MB860 using Tapatalk 2
-
Dang, did you type all that on your phone? Would've taken me ages.
-
Sadly I did.... my thumbs are about to fall off!
Def
Sent from my MB860 using Tapatalk 2
-
This is one thing that makes me appreciate living in Calgary. It's absolutely bone dry, which causes dry skin and nosebleeds but I couldn't get something to rust that badly if I tried.
-
Bummer about the Wingman Grant. I am not a fan of that tool to begin with, but seeing it rust like that with the level of polish it has is just disappointing.
In Leatherman's defense though, I have carried plenty of their tools for years now, and I live in a VERY humid environment. My tools all live in leather sheaths, and I don't clean them every day or even every week. My hands are sweaty most of the time, and I don't wipe the tool off before stowing it in the sheath. I get them wet all the time. I have never had one develop any rust that would have bothered me. Hell, I kept my sideclip in the rear pocket of my pants for a year, and that is one sweaty place. Not a speck of rust. My Charge has recently seen a full dunk in water, and I forgot about it in it's sheath for two days before cleaning it back up. No rust.
The only Leatherman I have had rust on me to the point it bothered me was my C33X. That blade lived in my right rear pocket every day for three months, and was flecked with rust by the end of the second week. But not near as bad as your Wingman Grant. I guess your environment is pretty extreme!
Sorry about the rant, and it wasn't due to your post Grant, I just get so sick of seeing Leatherman bashed by users here saying "Leatherman's rust, shoulda bought a Vic". That's akin to saying "A gerber pinched me once, I'll never buy another".
I use Leatherman products daily, and always will. I also use Gerber and Vic products. Each has their shortcomings, and none is definitely better than the others overall.
-
Have you considered your acidic abrasive personality as the root cause of the problem -

I do think that a TiNi SOG P3 would be a good test candidate in your vest. You just need to figure out the pocket clip part.
Bruce
-
Here's a photo of me that my boss took at work the other day:

In my right pocket you see my tape measure with eClipse pocket clip while on the left you see my Fisher Bullet, Photon Proton and Wingman. You can see how exposed it is there, and I spend hours at a time out in the weather.
Maybe the Wingman is the right tool for the consummate indoorsman? :D
Def
-
My Wingman has gone on several sweaty bike rides and camping trips and has developed no rust. Granted I live in a place that has gotten something like 10" of rain in the last 2 years...
-
@Mercury said:
I just get so sick of seeing Leatherman bashed by users here saying "Leatherman's rust, shoulda bought a Vic". That's akin to saying "A gerber pinched me once, I'll never buy another".I'm with Merc. I've carried just about every multitool in christendom at one time or another, and have never seen red rust like that on ANY Leatherman. The closest I got was the first time I took my PST fishing in salt water, where it was repeatedly wetted with salt water (disgorging hooks, cutting bait, snipping line), then backed dry in the sun. And even then, it didn't rust red, it got a white oxidation instead, and a dark staining that I never got rid of.
I know the Wingman is a budget priced tool, but that kid of rust tells me there's carbon steel in those pivots somewhere, and if true, that would be disappointing.
Def, I appreciate your unique circumstances. Maybe something in TiNi or other coating would be a good idea.
-
Amici,
Maybe a good suggestion would be to give all Leatherman multi tools a spray of Birchwood Casey Sheath gun oil as a good rust preventative going forward. Works on gun barrels, why not the Wingman?Cheers,
Serge -
Sorry to see that rust Grant. I'm going to post some pics of the Wave that I ended up buying for my brother. His Wave has also developed rust here and there. The tool has not jammed but there is plenty of rust all over it. He works on the open sea though so I can't think of a more challenging environment for steel.
-
I just get so sick of seeing Leatherman bashed by users here saying "Leatherman's rust, shoulda bought a Vic". That's akin to saying "A gerber pinched me once, I'll never buy another".
I'm with Merc. I've carried just about every multitool in christendom at one time or another, and have never seen red rust like that on ANY Leatherman. The closest I got was the first time I took my PST fishing in salt water, where it was repeatedly wetted with salt water (disgorging hooks, cutting bait, snipping line), then backed dry in the sun. And even then, it didn't rust red, it got a white oxidation instead, and a dark staining that I never got rid of.
I know the Wingman is a budget priced tool, but that kid of rust tells me there's carbon steel in those pivots somewhere, and if true, that would be disappointing.
Def, I appreciate your unique circumstances. Maybe something in TiNi or other coating would be a good idea.
I agree- I don't want to perpetuate the rumor that Leathermans rust, but the fact is, this Leatherman did rust. However, it was also under fairly wet conditions. Does that make it ok? Not for my needs. Does that mean it could happen to someone else? Yes. Does that mean it will happen to everyone else? Not necessarily.
As for a new vest tool, I will think about it but the Wingman will probably ride with me for another day or two simply because I have been far too busy at work to stop and consider other options. I have just finished three sixteen hour days in a row, and I'm off to do what will hopefully only be eight hours or so... Def's brain is mushier than usual right now... oh yeah, and it's raining... :P
Def
-
Octane is pretty close in terms of size and tools, even has a pocket clip, though lacks the scissors. Not sure it is going to be any more rust resistant though.

-
I can't say all leathermans rust either. I can only speak from my experience. I own about 10 of them total, but have only ever EDC'd 3 of them, the skeletool CX, Juice S2, Wave. The juice and wave both developed rust, the skeletool never did. I work in an office so my EDC environment is far from harsh.
I still like leathermans though, and what I might try next is to do a mirror polish on all the parts of my wave I can and try EDCing it again to see if that helps.
-
I have to say that I've never had any issues with rusting LM's either, and I've never exactly 'babied' my tools. The neglect and outright abuse by original Supertool went through is pretty embarrassing in hindsight. :-[
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login