Juice Club
-
The S2 definitely has a lot going for it.
I like how slim it is
as compared to the C2 with its confounded pocket-grabbing corkscrew :P -
@Heinz Doofenshmirtz said:
The blade in mine will take a very keen edge, but it dulls fairly quickly as well.I am experimenting with this for a couple of weeks now and it seems that Juice's blade gets dull even without use while days pass. But, every time I sharpen it (every couple of days), it keeps its edge for a little longer. I don't know if this makes any sense or if it is possible, but it seems like juice's blade steel has some kind of "memory" and the more times you sharpen it, the more it stays sharp.
-
Aleister, I've encountered that on both expensive and inexpensive knives and attribute it to overheating during the production sharpening process, which ruins the temper of the steel. On a Fallkniven I have it took five full on sharpenings before I got into the good steel.
-
Sometimes I think the grinding has been done too aggressively, putting stresses in the fine edge and making it curl. An easy way to check is just giving it a quick strop before use. If it cuts the edge is curling, if not then it's theonew's theory and a matter of getting to the good steel beneath. YMMV
-
@Heinz Doofenshmirtz said:
The blade in mine will take a very keen edge, but it dulls fairly quickly as well.
I am experimenting with this for a couple of weeks now and it seems that Juice's blade gets dull even without use while days pass. But, every time I sharpen it (every couple of days), it keeps its edge for a little longer. I don't know if this makes any sense or if it is possible, but it seems like juice's blade steel has some kind of "memory" and the more times you sharpen it, the more it stays sharp.
I think this is a general characteristic of cheaply manufactured hollow ground blades. As you sharpen the edge and wear it down, it moves the edge progressively into a thicker cross section which should reduce the tendency to roll the edge, unless it's a very shallow grind angle.
As nice a design as the Juices are, they're made pretty cheaply. I mean, they use a nut/bolt construction on the Style PS and CS, and the blade on the CS is also flat ground, so why can't they do it on the Juice line as well? I'd gladly give up a double sided hollow ground blade for a chisel edge flat grind blade. Is that too much to ask in a $50 tool?

-
I think the Juice line was created as a direct competitor against swiss army knives, which also have soft(ish) steel blades and riveted construction.
-
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2, then it will make its way back to the EDC rotation. The blades are even exactly the same thickness, I just had to drill a new hole and make a spring retention nick.
-
@Syph007 said:
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2..Brilliant idea! I had a Juice but the blade was pants, the combo bottle opener/can opener was a joke, and the scissors were poorly fitted and floppy. Replace the blade and scissors with Vic scissors (or Wenger serrated), and re-design that useless combo tool, and you'll have a decent MT. The Juice comes frustratingly close to hitting that sweet spot for a pocket tool, but it needs improvement.
**And for those who carry a SAK with their Juice: the combined weight of those two items is the same as ONE Swisstool Spirit (or any other similar-sized tool),, about 7 ounces. So you're better carrying one of those, rather than two tools. **
-
@shamus said:
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2..
Brilliant idea! I had a Juice but the blade was pants, the combo bottle opener/can opener was a joke, and the scissors were poorly fitted and floppy. Replace the blade and scissors with Vic scissors (or Wenger serrated), and re-design that useless combo tool, and you'll have a decent MT. The Juice comes frustratingly close to hitting that sweet spot for a pocket tool, but it needs improvement.
**And for those who carry a SAK with their Juice: the combined weight of those two items is the same as ONE Swisstool Spirit (or any other similar-sized tool),, about 7 ounces. So you're better carrying one of those, rather than two tools. **
My thoughts exactly. I just posted my progress so far in the mod section.
Next I do want to get vic scissors on this and I'll be much happier.
-
Juice club...I'm in
Here are my*** Leatherman Juice*** MT'sJuice CS4
Juice PRO
Juice S2.I have a*** Juice XE6*** on the way in Thunder Purple, and I'm also on the look out for a*** Juice KF4***.
-
@shamus said:
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2..
**And for those who carry a SAK with their Juice: the combined weight of those two items is the same as ONE Swisstool Spirit (or any other similar-sized tool),, about 7 ounces. So you're better carrying one of those, rather than two tools. **
If I could I would, I wouldn't actually I would carry my TTI but as the law stands I cant, not without upsetting mr plod.
So for now it's the cs4 when not at work.
And it works perfectly fine. And if I need a little more cutting ability I could pair it with my pioneer with pruner blade or my ukpk.
The juice is what it is and I find the blade excellent for its size, cuts and sharpens very well its just I can't lean on it as much as others. -
@shamus said:
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2..
Brilliant idea! I had a Juice but the blade was pants, the combo bottle opener/can opener was a joke, and the scissors were poorly fitted and floppy. Replace the blade and scissors with Vic scissors (or Wenger serrated), and re-design that useless combo tool, and you'll have a decent MT. The Juice comes frustratingly close to hitting that sweet spot for a pocket tool, but it needs improvement.
**And for those who carry a SAK with their Juice: the combined weight of those two items is the same as ONE Swisstool Spirit (or any other similar-sized tool),, about 7 ounces. So you're better carrying one of those, rather than two tools. **
MY S2 is the work horse that I carry the most.

-JS
-
I keep my S2 in my survival kit, along with my Wenger PER Ranger 179. This combo works better for me in this application. The Ranger has a ginormous saw, and great OHO blade, and the S2 has all the small SAK-ey stuff like scissors and drivers, and good pliers. I also like that if I lose one, I'm not totally screwed... I still have a decent tool with me.
-
I'm in, the Juice S2 Flaming Orange.



-
Sweet!
And its a brand new one too, with the new lettering style. Congrats! 
So what are the date codes on that one armèe-suisse? :)
-
The Juice is loose!

jwh
-
Great photo jw!

-
Thanks J-Sews and MultiMat.
jwh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

