Juice Club
-
@Syph007 said:
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2..Brilliant idea! I had a Juice but the blade was pants, the combo bottle opener/can opener was a joke, and the scissors were poorly fitted and floppy. Replace the blade and scissors with Vic scissors (or Wenger serrated), and re-design that useless combo tool, and you'll have a decent MT. The Juice comes frustratingly close to hitting that sweet spot for a pocket tool, but it needs improvement.
**And for those who carry a SAK with their Juice: the combined weight of those two items is the same as ONE Swisstool Spirit (or any other similar-sized tool),, about 7 ounces. So you're better carrying one of those, rather than two tools. **
-
@shamus said:
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2..
Brilliant idea! I had a Juice but the blade was pants, the combo bottle opener/can opener was a joke, and the scissors were poorly fitted and floppy. Replace the blade and scissors with Vic scissors (or Wenger serrated), and re-design that useless combo tool, and you'll have a decent MT. The Juice comes frustratingly close to hitting that sweet spot for a pocket tool, but it needs improvement.
**And for those who carry a SAK with their Juice: the combined weight of those two items is the same as ONE Swisstool Spirit (or any other similar-sized tool),, about 7 ounces. So you're better carrying one of those, rather than two tools. **
My thoughts exactly. I just posted my progress so far in the mod section.
Next I do want to get vic scissors on this and I'll be much happier.
-
Juice club...I'm in
Here are my*** Leatherman Juice*** MT'sJuice CS4
Juice PRO
Juice S2.I have a*** Juice XE6*** on the way in Thunder Purple, and I'm also on the look out for a*** Juice KF4***.
-
@shamus said:
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2..
**And for those who carry a SAK with their Juice: the combined weight of those two items is the same as ONE Swisstool Spirit (or any other similar-sized tool),, about 7 ounces. So you're better carrying one of those, rather than two tools. **
If I could I would, I wouldn't actually I would carry my TTI but as the law stands I cant, not without upsetting mr plod.
So for now it's the cs4 when not at work.
And it works perfectly fine. And if I need a little more cutting ability I could pair it with my pioneer with pruner blade or my ukpk.
The juice is what it is and I find the blade excellent for its size, cuts and sharpens very well its just I can't lean on it as much as others. -
@shamus said:
I still like my S2 but always hated the blade. Im just about done grinding on a 91mm SAK blade and fitting in on the S2..
Brilliant idea! I had a Juice but the blade was pants, the combo bottle opener/can opener was a joke, and the scissors were poorly fitted and floppy. Replace the blade and scissors with Vic scissors (or Wenger serrated), and re-design that useless combo tool, and you'll have a decent MT. The Juice comes frustratingly close to hitting that sweet spot for a pocket tool, but it needs improvement.
**And for those who carry a SAK with their Juice: the combined weight of those two items is the same as ONE Swisstool Spirit (or any other similar-sized tool),, about 7 ounces. So you're better carrying one of those, rather than two tools. **
MY S2 is the work horse that I carry the most.

-JS
-
I keep my S2 in my survival kit, along with my Wenger PER Ranger 179. This combo works better for me in this application. The Ranger has a ginormous saw, and great OHO blade, and the S2 has all the small SAK-ey stuff like scissors and drivers, and good pliers. I also like that if I lose one, I'm not totally screwed... I still have a decent tool with me.
-
I'm in, the Juice S2 Flaming Orange.



-
Sweet!
And its a brand new one too, with the new lettering style. Congrats! 
So what are the date codes on that one armèe-suisse? :)
-
The Juice is loose!

jwh
-
Great photo jw!

-
Thanks J-Sews and MultiMat.
jwh
-
Mine:
S2 in storm grey. Dated 0102. Stamped Leatherman USA.
KF4 in solar yellow. Dated 0801. Stamped** Leatherman USA**.
CS4 in storm grey. Dated 0402. Stamped Leatherman Tool.*The stamps are for the following:
Leatherman USA models were made before Leatherman started production overseas.
Leatherman USA with the USA ground out were made after overseas production started. The only Juice models to have this are certain solar yellow KF4s.
Leatherman Tool stamping was started after Leatherman had moved production overseas. -
A great trio you've got there JN!

@JNieporte said:
Mine:S2 in storm grey. Dated 0102. Stamped Leatherman USA.
KF4 in solar yellow. Dated 0801. Stamped** Leatherman USA**.
CS4 in storm grey. Dated 0402. Stamped Leatherman Tool.*The stamps are for the following:
Leatherman USA models were made before Leatherman started production overseas.
Leatherman USA with the USA ground out were made after overseas production started. The only Juice models to have this are certain solar yellow KF4s.
Leatherman Tool stamping was started after Leatherman had moved production overseas.Hmmm, but "moved production overseas" isn't exactly the case.
To be precise, Leatherman has a few individual components made in other countries, but the vast majority are produced in their Portland Oregon plant, as well as 100% of the assembly work. Despite this however, a California Court decision ruled they could no longer have U.S.A on the tools. Here is a quote from the Leatherman Website going into more detail:May, 2005, Portland, OR—A Los Angeles Superior Court judge has found that between April of 1997 and April of 2002, Leatherman Tool Group, Inc. violated a unique California law concerning the ability of companies to represent their products as “Made in USA.” The court in Colgan v. Leatherman Tool Group held that under California law Leatherman engaged in false or misleading advertising by representing that certain of its tools were “Made in USA.” As a result, the court directed the company to pay approximately $13 million in restitution. Leatherman is disappointed with the ruling and intends to file an appeal.
A recent Associated Press story about the ruling gave the distinct impression that Leatherman brand multi-tools are, for the most part, made outside the United States. This is false.
The unique California law at issue prohibits companies from selling in California any product represented as “Made in USA” if “any article, unit, or part” of the product was “substantially made, manufactured, or produced outside of the United States.” As interpreted by one California judge, the law prohibits a “Made in USA” representation of a product even if the only foreign content in the product is a single screw.
These Leatherman tools were all built and assembled by U.S. workers at U.S. factories using primarily parts made entirely in the United States and some parts processed, in part, in Western Europe, Mexico, or Canada. Unfortunately, Leatherman is not able to procure all of its component parts in the United States because of quality, technological, or economic considerations. But Leatherman Tool Group has never shipped a job overseas, and the company remains committed to keeping and creating as many jobs here as possible.
“As proud as I am of the invention of the Leatherman tool, I am even more proud of the hundreds of American jobs I have created,” said company founder and president Tim Leatherman. “I am disappointed in the court’s ruling for a number of reasons, but I am especially disappointed that the court disregarded a ruling issued by a federal judge in 1997 stating that our representation that the Leatherman PST tool was made in the United States was ‘neither false nor misleading.’”
-
J-sews; I stand corrected. I know the sheaths and plier heads are made in Mexico, but I'm not sure about other components. Leatherman is still my go-to brand for a multi-tool.
-
@JNieporte said:
J-sews; I stand corrected. I know the sheaths and plier heads are made in Mexico, but I'm not sure about other components. Leatherman is still my go-to brand for a multi-tool.Cheers, same here. :)
-
I'm in
Sent from my LG-P925 using Tapatalk 2

-
@Hypnos3510 said:
I'm inSent from my LG-P925 using Tapatalk 2
welcome to the club!

-
I'm in
Sent from my LG-P925 using Tapatalk 2
welcome to the club!

Welcome indeed.
I was actually carrying my SC2 today as it happens. Great lightweight option for my days off. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

