Tofty's Custom Brass Torches
-
@Tofty said:
As i'm nearly finished building my Ti DIVE torch i set about ordering all the parts i need so i can start on the heat-sinked brass torch. I ended up ordering a selection of possible drivers and LED types to experiment with as well as some parts for other potential projects including some AAA drivers and XM-Ls on small boards.
I then set about designing something around the parts and this is what i came up with:



The body is made up of a copper head, brass body and nickel-silver tail with stainless ends and body rings. The colours in the render should be taken with a pinch of salt as nickel silver should have a slightly yellowish silver hue rather than a deep gray.
It has a clicky tail switch with metal button cover and an aspherical lens.
The driver runs at 500mA on a maximum of 1.5V so no rechargable lithiums.Wow! That is spectacular! If you ever decide to sell this one, let me know!
Seriously.

-
stunning mate.

-
It's been a while but here's another MXDL build.
Added i little more detail to the Mark III but it's pretty much the same.



and just for fun, HDR:

With only one long term project still in progress i can finally start making the finned brass torch prototype and then the copper/brass/nickel silver torch. I have all the materials needed for the first one so watch this space.
-
That thing's incredibly cool! Makes me want to start steampunk cosplaying. :D
One question though, what does that beast weigh?
-
Can't wait!!
-
It weighs approximately 55grams which isn't too bad considering my original brass torch must weigh twice that.
-
55g, or 0.64 Vic Harvesters, that's a lot less than I expected. Cool!
-
I like the way it tapers further down the body compared to most torches

-
I can't imagine how many hours went in to that Mate :o
Its just

-
Damn

-
Cheers Guys.
Anyone remember this:

well........



Getting there.
I've decided to make two heads for this torch:
The first will be as planned, using an XM-L driven at 3A.
The second will use a nichia 219 (same size as XP-G) driven at 1.4A
This is because the smaller die of the nichia suits the TIR lens much better so should give a better beam pattern.
Also the nichia has a very high CRI which i want to try out.
Just got to order more parts now. -
Where was that ^^^^^ Sat evening !!!!!
Great meeting you the other night mate.
Just so everyone knows, Toftys lights are better in real life that on screen, works of art.
-
Thanks Essexman
I hadn't even started it on saturday, made the first cuts on sunday.
-
Stunning work there mate

-
Done.



This is the XM-L head with a T5 tint which is warmer than i expected but still quite a pleasant light.
I set the driver to a simple high/low switching mode, i really don't like any of the more elaborate mode choices like strobe and SOS.I will have to do some proper beam shots over the weekend for a few of my lights as well as the QTC functionality video for my titanium torch.
-
Love that. A wee bit steam punkish in a way?
-
Woah, extreme gorgeousness

-
Damn

-
awesome. 8)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login