The motorcycle thread.
-
It is that time of year again. Tomorrow is my last day of work, and then off for two months. I can't wait. Unfortunately the school I work at will no longer exist beyond tomorrow, as the Board is closing it down. This means, I get to go to another school next year. I am looking forward to a change in locality. It is bitter sweet as I worked here for the last 11 years. It will be strange going to another workplace.
Because tomorrow is the last day, I will celebrate this by driving my motorcycle to work. I haven't had the opportunity to take it to work very often this year, with all the packing and moving of personal effects for the last month or so. That packing is now done. The motorcycle needed a bit of washing. I took two photos of it all done and ready.


It is a 2009 V-Star 1100. I have a leather tank bib that I haven't installed yet to hide those ugly tank stickers. Next on the list, I am thinking of getting a better seat, something with a backrest. My neighbours had a garage sale, where I found a Leather tool bag that installs on the front forks. Not sure if I will install it yet.
I would love to see any motorcycles you folks may have.
Happy motorcycling.
:D -
I hated those stickers on the top of the tank ever since I bought it new from the dealer. i asked them to remove them and they told me they couldn't as it would be breaking some law. However, I could as it was my motorcycle. Frankly, I think they didn't want the hassle of removing those darn warning stickers. I tried peeling them off ever so gingerly...but they are on real good. All I managed was to tear off a small corner...which made me hate them all the more.
Solution, buy a tank bib and cover them.

A lot easier than trying to peel those idiot stickers.
-
i never really look in the break room but today i did for some reason

glad i did though.nice bike chako.plenty poke there i'd imagine.
the weather has been shocking over here in the south of ireland but one or two were really good and i managed to get out for a spot of fishing with my 2004 kawasaki z1000.
remember now keep it between the ditches.
gav
-
Nice motorcycle, and in Kawasaki green at that. :D
-
Chako....be careful putting the leather bag on the forks.On some of my friend's bikes the bags would rub the fender when the forks rebounded leaving nasty rub marks in the paint.Not saying that will happen to your bike but something to keep an eye on.As far a seats I have put Mustang Wide touring seats with a backrest on the last three bikes I have owned and they are great.I get the two piece Mustang so I can remove the passenger seat for the solo look.

-
No worries about the tool bag...as it won't fit anyways. I could make this one fit, or make one out of Leather if I really wanted to...but seems a lot of work for something that didn't look all that great on the bike, and is of questionable utility.
I was thinking Ultimate Seats.
But not sure. I will look into Mustang seats.

Edit: Looks like Mustang only sells them as a 3 piece. I have no interest in accruing another passenger seat if I don't have to.

-
Necro thread revival now!
Roll to another year...and it has been a busy month for my motorcycle. I finally did order the seat. I ended up getting a 3 piece Mustang seat. I am very very happy that I did it...as the seat is fantastic. Way better than the stock seat. My only issue, the backrest pushes me too far forward onto my tank. After doing a bit of research, I found that I could order a backrest post from Mustang that moves the pad 2 inches backwards. That means I have the extra passenger seat...which is a lot nicer than the stock I can tell you. I got the studded version to match the tank bib.
Well as faith would have it...that part came in yesterday. The same day that I brought my motorcycle into the Motorcycle Clinic to do a bevy of things to my ride. I had them change the oil...and that was an adventure in itself.
When I made my appointment a few weeks ago, I had told them that I shelled out for the oil filter re-location kit by Jardine. Unfortunately, they ordered the stock filter, and not the kit's screw on filter. Sadly, when I had the kit done from the now defunct local Yamaha dealer, they didn't give me any paperwork...so I didn't know which filter it used. I figured they would figure it out...well...they didn't.
Yesterday morning saw me drop of my bike, told by the shop they couldn't match my filter, and to look into it and find what it needed. They did a quick and lazy net search but didn't use the right key words. Thus, I was given a piece of paper with the filter number and manufacturer. I decided to drive to the now defunct Yamaha dealer (owner retiring...so still in business to sell what stock he had left). He wrote two Yamaha stock numbers and told me that Canadian tire sells the filter.
I drive to Canadian Tire and ask the parts guy behind the desk, as I couldn't find any of the 3 numbers I now have on any of the filters (Of course they didn't give me the old one at the shop). He looked in his computer and came up with no match. Sigh.
I then drove home...and this is the part that angers me. It took me 2 minutes to find the part numbers online. So off I go back to Canadian Tire with the proper FRAM and K&N filter numbers. I quickly find the part, buy one, and then run back to the shop so that they can get the oil change done. And here I thought having the oil filter re-location kit was a smart thing to do, as to get to the old basket style filter, one has to disassemble half the bike. Ah well, I now know the filter. Going to buy 8 of them in the next couple of days to have stock on hand.
Whilst at the Motorcycle Clinic, they also installed my Baron 2" riser kit and Baron 2" Cables. What a big difference this makes to the comfort of the bike. I was always outstretched and reaching for the bars. Now, it is so comfortable, and my arms are now bent. It is amazing how much better it feels to move the handle bars as little as 2". A plus, the new cables are a lot nicer than the black covered OEM ones...but that is a little added bonus...as I didn't care if they were blacked out or blinged out. Now they sparkle in the sunlight. I guess it goes with all the chrome accents. I must admit, clear covered cables showing the stainless steel underweave...is a nice accent.
On top of this, I was having issues with my saddle bags. The folks who installed them didn't put a long enough spacer...meaning they rubbed against the seat. This issue was partly the reason to get a new seat, as the stock seat got a hole on one side where I pinched it once while closing the lid. Now, they fixed this issue, which means my new Mustang seat will not get damages from opening or closing the saddle bags.
So I am very happy with how the bike fits me today. I just came from a long ride, and the motorcycle feels just perfect.
The only thing left...and I have been debating this for a very very long time...add third party pipes, an air charger, and re-jetting the carbs. I am not sure if I want to go this way though. I do like the look of the Kuryakin Air charger. I know there are better solutions out there...but on the looks dept., this one is very nice. However, do I want to mess with this...not sure. I have been thinking about it since I got the motorcycle back in 2010.
Any suggestions?
-
Nothing better than modding your bike to keep the love for it growing :D
Regarding the jet kit. I dont particularly know your bike but i know carbs and can tell you that as a general rule if you are going to do the exhaust and air filter you have to re jet, or else your bike will end up running bad and lean and thats not good. Lean (too much air in the mixture) is bad because it leads to overheating and bad things, your bike is air cooled so less reason for letting that to happen.
Now when re jetting if you are going to let someone else do it, try to go for the most common and proven choices of exhaust, airbox, charger, etc. and jetting mods you can find for your motorcycle and still like them. That way you ensure the less guess work and the best support should you need it. I.e. go for something that works for you that everybody knows. Carbs can be more unpredictable than an angry woman if you do bad things to them or if you are not sure what you are doing with them.
Bear in mind that the mods you want to make are performance oriented, so they are meant to make your bike more powerfull, not necesarily more comfortable to ride, so you may want to check some user experiences about them.
Just know that if you go that road it might need some ammount of testing and tunning or it might come up well at first try, there is no real way to know how much fiddling it would need until you do it.
So if you are happy with how it is now better just leave it alone. Usually you can just mod the end cans, not the full exhaust, so you can get a different tone from it and dont need to re jet or mod anything else to keep it running fine, if you mess with the airbox, charger, you are in for a lot of tunning. But better to get that from someone who knows your bike.
Keep riding!!!
-
-
@Chako said:
I hated those stickers on the top of the tank ever since I bought it new from the dealer. i asked them to remove them and they told me they couldn't as it would be breaking some law. However, I could as it was my motorcycle. Frankly, I think they didn't want the hassle of removing those darn warning stickers. I tried peeling them off ever so gingerly...but they are on real good. All I managed was to tear off a small corner...which made me hate them all the more.Solution, buy a tank bib and cover them.

A lot easier than trying to peel those idiot stickers.
Use a hairdryer to warm them and they'll peel easier. DO NOT use a heat gun, you will kill your paint!
WD40 works well, too, especially for removing any residue left behind.Done this on a few bikes - my own and mates bikes. Worked fine and no busted teeth, due to knackered paint. :-) B-) :-P
Sent from my Nexus S via Squiffy Tart 4
-
That is my worry about doing this. I think I may have to spend more time thinking and researching. Thanks for the reply RamoN
I do like the look of the Kuryakyn hypercharger though.
2010 FXDC with Kuryakyn Hypercharger
PTRSAK, nice Ducati.

-
Heavily modified Sportster 1200cc that was a 24th and 25th birthday present by my brothers.

-
That looks very nice styx.
-
Very 8) ride.

-
oh I know. I just don't understand why some of my EXs were jealous of her
-
Yep. And after that I really saw flying saucers lol
-
Always put on your helmet before discussing your bike with wives or girlfriends.
Def
Sent from a digital multitool
-
Now that's a pro tip
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
