poor, poor, PST
-
Okay, maybe I'm from a different school of thought. I think this thing looks like an opportunity waiting to happen.
I got a work horse PST from Captain Spaulding, and LOVED that it had some miles on it. Honestly, not as rough as this one, but still, it had paint all crusted up inside a few of the tools. It was the perfect excuse to take apart and fiddle with the workings of a Leatherman without fear of messing up a shelf queen.
It really looks like not too much effort should bring this thing back into pretty darn good shape. Maybe not ever as a collecting piece, but I threw my PST into my range bag. It's going to work for a living! :D
Look at some of the miracles Sparky415 has done in the Car Boot Finds thread, if you think this thing's in rough shape.
/topic/20179I'm eagerly looking forward to seeing you bring this thing back to life!
-
It is a riveted Japan PST or it would already be in pieces. The tools all surprised me and opened quite easily.
Bruce
-
Just surface rust ;) I think you have it under control Bruce

I'm waiting to see how it looks after the ultrasonic cleaner -
Hate to see one that has been left to rust like that :( Glad to see someone gonna do something about it though
Can't wait to see the after pics 
-
The expansion contraction idea sounds like a good one Bruce
.
I am keen to see how the plier pivot comes up & the tricky bits under the rivets + the areas you can not physically get into
. If it was knurled fastener PST would you have pulled it apart Bruce

I wonder if anyone has ever drilled out the rivets on one of these Japanese made PST's
& retro fitted alternate fasteners
probably a sacrilegious thought & more trouble than it is worth
:D :DThe stake marks found on the riveted PSTs plier pivot may be a hinderance(for initial rust) & a help(getting lube in & crap out)


-
Hi Mat,
I have thought about drilling out one side of the rivets and putting in "stock" PST pivot screws. I have a nearly mint Japan PST with hollow rivets that has a broken awl. So I have thought about making new rivets but that seems like a lot of work that could easily end with a tool that will not open.
I have opened up many a PST so if it would have been knurled fasteners I would have opened it up without a second thought.
I think the stake marks are a really neat opportunity to get lube into the plier pivot.
If the rust gets loosened up and turns to crud the ultrasonic cleaner will get it off the tool. Maybe a couple of cycles between the dip and ultrasonic?
I will take it out of the dip tomorrow for inspection.
Bruce
-
Looking forward to see how this goes..
Good thread Bruce.. :) -
Yeah, I hadn't caught that it was a riveted one. I'm honestly not familiar with the Japanese variant, and guess I'd jsut assumed all PSTs were knurled nut construction. Still happy to see how it goes and wish you the best of luck in its recovery. :D
-
Good thread title Bruce. :D Looking forward to seeing how this comes out. As you can't take the pivots apart I guess the best I could think of would be to attack them with a toothbrush.
-
Ok, a quick update. I went outside this morning and took a look at the tool. I should have tried to take a picture but I didn't. The tools are on a table on our deck and if you walk between the house and garage you pass the jars of dip. I shake the jars occasionally when I walk past just to agitate the tools. When I saw the Japan PST this morning it looked like it was covered with dirt, all the junk floating in the dip settled and a bunch was on top of the tool. So I got it out and wiped it off for a few pictures. Also, I noticed that the tool is soaking in Kroil Oil which is a really good penetrating oil. Expensive and smells like fish but it really works.
This side looks much better now:

The word that was written (Robinson) in blue permanent marker was on this side, unfortunately someone ground this side before they wrote on the tool:

Opposite side 1:

Opposite side 2:

The markings on the blade tang are somewhat visible now:

Sorry about the white balance, I did not set it for the lower light this morning and the tool is already back in the dip so....
Gareth, It was very much appreciated that you came up with the thread title. I was trying to figure out what to use when I read you message.
So much sooner than I thought the tool might be ready for the ultrasonic cleaner!
Bruce
-
wow, that's looking much better already! Shame about the poor grinding job but perhaps you might be able to polish it up some?
-
Great thread. Makes me want to resuscitate a PST too.
-
Looking much better!
-
-
Since the PST did so well overnight in the dip I decided to put a little more time into it. Plus, I am not leaving on a business trip this week so no leaving for the airport today.
I am very lucky that I have a Scotchbrite wheel exactly the same as what they use at Leatherman. I saw one sitting on a bench when we went on the tour at Leatherman and asked the guy running the grinder what grit it was. So I bought one and the adapters then I needed to find a good used 8" bench grinder to power the wheel. So it did a great job of cleaning up the one handle. I have always been disturbed by people cleaning up a Leatherman tool with a longitudinal stroke, the factory used a up and down stroke that looks very different that left to right. The blade on this PST and the grinding on the handle were both left to right. It looked like someone used medium sandpaper on the blade, so I touched it up a little on the Scotchbrite wheel and attached the handle that was ground.
Here is the tool sitting in my ultrasonic cleaner before I put in water:

I put in the water, detergent and vinegar (my cleaning mix) and the plier pivot looked like it was smoking:

That is dirt particles being driven out of the plier pivot, I was lucky I still had the camera in my pocket because it did not last for more than a minute. Here is a closer shot of the pivot:

It looks like just a dirty spot starting at about 3 o'clock on the pivot but it is stuff rising from the ultrasonic. There is a little still coming up from 9 o'clock but it just about ended by the time I got the picture taken.
So it looks like I have some play time today on tools.
Bruce
-
I hope it sees better days soon!
Sent from Ash forum mobile
-
Looking really good
I love it when a neglected tool gets a new life. -
Looking good Bruce
Good work with the Scotchbrite wheel
-
Thanks Sparky and everyone who has commented. I thought this project was going to take quite awhile but I am over 90% done. Some touch-up remains and the blade needs sharpened but it might be awhile before I dig out the Dremel tool so here is yet another update.
I rinsed the tool with hot water out of the ultrasonic because the vinegar is a acid and while it brightens the tool it also will cause it to rust. So after a quick shot of air here it is:

Other side:



Finally the closed shot:

It's not perfect but not bad. I need to blend around the one rivet on the LEATHERMAN side and some minor clean up remains but it really came out better than I expected. The file is what really surprised me, usually the file requires some work with the Dremel tool and a small wire brush but the file is nearly perfect.
I'm going to spray it with some CRC Marine 5-56 and put it in a clean jar to soak for Leatherman brown prevention.
More when I get around to working on it some more.
Bruce
-
I realized this is a great place to use Christian St. Clair's Nano Oil! I have used it on tools I want to keep so I put a small drop on every pivot and will put it back in the sun.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login