Leatherman Pliers Strength
-
I'm new to multi-tools, in fact i've still to receive my first, a Juice XE6. I have to say the recent posts regarding pliers strength have got me worried.
I have a fair number of quality pliers in my toolbox from the likes of Knipex, Elliot Lucas, Facom, & Record, i've used and abused these over many years and never had one fail. It's surprising that a set of quality pliers costing under £10 can outperform a multi-tool costing £70. Fair enough the multi-tool will have other features, but if I have to be extra careful with the pliers then i'm pretty annoyed at that >:( I like to have confidence in my tools.
-
You can have confidence in any of the "brand name" tools. Every tool can be broken if one tries hard enough. The stories that are posted here are the rare and/or extreme cases, gathered together by serious enthusiasts, so there may appear to be many occasions of breakage. Just remember how many hundreds of thousands, even millions of units there are out there, functioning properly in the hands of folks who don't know the limits of the tools or proper maintenance.
Unless you buy some cheaply made piece of junk, the tool can be relied on for even heavy and/or dirty tasks. Of course, that's the purpose of this site- to help you decide what is good and what isn't!
The Juice XE6 is a solid, light to medium duty tool. If you plan to maintain diesel engines or trans oceanic cargo ships, you'll probably want to go with something bigger, but the XE6 should keep you safe for some time yet!
Def
-
??? Bos, enlighten me more on this. I hope new LMs are not produced and fabricated in China, then shipped back to Oregon. Correct me if I'm wrong but, I think steel produced from Europe and the Americas is harder and better than steel produced from Asia, why? coz of geographical location. Nowhere in the newer LM multitools can you see imprints of "made in US of A" and "leatherman" in each tool. Boxes, sheaths, and bit holders,are all made in Asia (ever seen a Vic made outside the Swiss' land?). I hope too that the LM company/group of companies won't compromise their tool's quality over cutting production cost.
-
That's a common misconception, but don't worry about it.
Leatherman tools are made in Portland, Oregon in the USA
They aren't outsourcing labor, and the majority of the components are manufactured in house. Simpler things like pivot pins are purchased from suppliers all over the world, but those are only minor components, and even those are top quality. The vast majority of the tool is manufactured on site at Leatherman's facility.
The tools are still made in the USA, but due to a stricter law on labeling in California, they had to remove the USA label from their tools. California state law requires a higher percentage of the tool is manufactured in the USA to have that stamp, so, rather than make unbranded tools for sale in California and branded tools for everyone else, they removed the USA stamp on all of them.
In addition, I wouldn't worry too much about what is made where. The US manufactured products are generally good, but are not the best, and can vary greatly from excellent all the way down to crapola. As you know, the fit and finish on Swiss made products is simply amazing, and far above everyone else's. There is also some good stuff coming from Hong Kong, Taiwan and Japan so I wouldn't be too hard on the Orient. As I always said, Chinese made stuff can be good, it just requires someone on "our" end of the world to want it. Most of what we get from China is cheap crap, not because that's all they can make, but because we don't want to spend the money over here. As the Gerber Flik has proven, some very good things can come from China, if only someone is willing to pay for it and mind the store.
Country of origin can be an indicator of quality, but I wouldn't write off a tool for geographical reasons alone.
Anyways, bottom line is, Leatherman is upholding their standards of quality, and I can say with absolute certainty that if and when Leatherman ever outsources tools, which isn't likely, they will maintain the same level of quality we have come to expect. For anyone living anywhere in the world, outside of California, take heart, Leatherman tools are made in the USA. For those living in California, have faith that 78.2% of Leathermans are made in the USA! :P
Def
-
@Defender said:
That's a common misconception, but don't worry about it.Leatherman tools are made in Portland, Oregon in the USA
.... Simpler things like pivot pins are purchased from suppliers all over the world, but those are only minor components, and even those are top quality. ...NeitherExtreme wrote Leatherman's plier heads were made in Mexico.
-
Ok, 76.3% then! :P
The point is, if you like Leatherman's build quality, it's still Leatherman's build quality and they haven't declined in recent years.
Def
-
Just curious, but isn't the TTi supposed to have the S30V blade instead of the 154cm?
-
@nautical34 said:
Just curious, but isn't the TTi supposed to have the S30V blade instead of the 154cm?You are right, Nautical.
Charge TTi

-
The reason I bring it up is because the TTi pictured on the previous page here has a 154cm blade on it, just thought it was kind of odd.
-GM
-
Nope, that must be a Charge Ti. That sports a 154CM blade!
-
lol... that's just it, it's not a Ti, it's a TTi but it has the wrong blade.

-GM
-
It's either one of the two situations:
If it is a "Ti" it got the wrong serrated blade and wrong plier jaws.
If it is a "TTi" it got the wrong plain blade. -
Strange

-
It's either one of the two situations:
If it is a "Ti" it got the wrong serrated blade and wrong plier jaws.
If it is a "TTi" it got the wrong plain blade.One of three* ,
It's an "XTi" that has had the extra bit driver replace with the Scissors and Flathead.
It's no big deal I just thought it was kind of an interesting piece.
-GM
-
lol.....GM's right, but still is an interesting piece.
-
Here's the box of that TTi of mine. So, does having a wrong blade on the wrong tool a problem?
<a href="http://img409.imageshack.us/my.php?image=p1010110ri1.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img409.imageshack.us/img409/4258/p1010110ri1.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://img183.imageshack.us/my.php?image=p1010111xh1.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img183.imageshack.us/img183/4278/p1010111xh1.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://img183.imageshack.us/my.php?image=p1010112ki4.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img183.imageshack.us/img183/1350/p1010112ki4.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
If your TTi has a 154cm knife, something is wrong. Contact Leatherman, and they'll replace it.
Since we're talking about the TTi, what exactly is the purpose of the cap crimper?
-
@teofilo said:
Here's the box of that TTi of mine. So, does having a wrong blade on the wrong tool a problem?@edap617 said:
It's either one of the two situations:
If it is a "Ti" it got the wrong serrated blade and wrong plier jaws.
If it is a "TTi" it got the wrong plain blade.It is a TTi and it got a wrong plain edge blade...
But then again, there is nothing wrong with having a 154CM blade. That TTi is unique and it is a colector's item -
To be honest, I like 154CM better than S30V at times.. 154CM is easier to sharpen too! Oh and S30v is sort of brittle to the edge can chip rather than dull it...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



