Leatherman Pliers Strength
-
That's a common misconception, but don't worry about it.
Leatherman tools are made in Portland, Oregon in the USA
They aren't outsourcing labor, and the majority of the components are manufactured in house. Simpler things like pivot pins are purchased from suppliers all over the world, but those are only minor components, and even those are top quality. The vast majority of the tool is manufactured on site at Leatherman's facility.
The tools are still made in the USA, but due to a stricter law on labeling in California, they had to remove the USA label from their tools. California state law requires a higher percentage of the tool is manufactured in the USA to have that stamp, so, rather than make unbranded tools for sale in California and branded tools for everyone else, they removed the USA stamp on all of them.
In addition, I wouldn't worry too much about what is made where. The US manufactured products are generally good, but are not the best, and can vary greatly from excellent all the way down to crapola. As you know, the fit and finish on Swiss made products is simply amazing, and far above everyone else's. There is also some good stuff coming from Hong Kong, Taiwan and Japan so I wouldn't be too hard on the Orient. As I always said, Chinese made stuff can be good, it just requires someone on "our" end of the world to want it. Most of what we get from China is cheap crap, not because that's all they can make, but because we don't want to spend the money over here. As the Gerber Flik has proven, some very good things can come from China, if only someone is willing to pay for it and mind the store.
Country of origin can be an indicator of quality, but I wouldn't write off a tool for geographical reasons alone.
Anyways, bottom line is, Leatherman is upholding their standards of quality, and I can say with absolute certainty that if and when Leatherman ever outsources tools, which isn't likely, they will maintain the same level of quality we have come to expect. For anyone living anywhere in the world, outside of California, take heart, Leatherman tools are made in the USA. For those living in California, have faith that 78.2% of Leathermans are made in the USA! :P
Def
-
@Defender said:
That's a common misconception, but don't worry about it.Leatherman tools are made in Portland, Oregon in the USA
.... Simpler things like pivot pins are purchased from suppliers all over the world, but those are only minor components, and even those are top quality. ...NeitherExtreme wrote Leatherman's plier heads were made in Mexico.
-
Ok, 76.3% then! :P
The point is, if you like Leatherman's build quality, it's still Leatherman's build quality and they haven't declined in recent years.
Def
-
Just curious, but isn't the TTi supposed to have the S30V blade instead of the 154cm?
-
@nautical34 said:
Just curious, but isn't the TTi supposed to have the S30V blade instead of the 154cm?You are right, Nautical.
Charge TTi

-
The reason I bring it up is because the TTi pictured on the previous page here has a 154cm blade on it, just thought it was kind of odd.
-GM
-
Nope, that must be a Charge Ti. That sports a 154CM blade!
-
lol... that's just it, it's not a Ti, it's a TTi but it has the wrong blade.

-GM
-
It's either one of the two situations:
If it is a "Ti" it got the wrong serrated blade and wrong plier jaws.
If it is a "TTi" it got the wrong plain blade. -
Strange

-
It's either one of the two situations:
If it is a "Ti" it got the wrong serrated blade and wrong plier jaws.
If it is a "TTi" it got the wrong plain blade.One of three* ,
It's an "XTi" that has had the extra bit driver replace with the Scissors and Flathead.
It's no big deal I just thought it was kind of an interesting piece.
-GM
-
lol.....GM's right, but still is an interesting piece.
-
Here's the box of that TTi of mine. So, does having a wrong blade on the wrong tool a problem?
<a href="http://img409.imageshack.us/my.php?image=p1010110ri1.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img409.imageshack.us/img409/4258/p1010110ri1.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://img183.imageshack.us/my.php?image=p1010111xh1.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img183.imageshack.us/img183/4278/p1010111xh1.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://img183.imageshack.us/my.php?image=p1010112ki4.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img183.imageshack.us/img183/1350/p1010112ki4.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
If your TTi has a 154cm knife, something is wrong. Contact Leatherman, and they'll replace it.
Since we're talking about the TTi, what exactly is the purpose of the cap crimper?
-
@teofilo said:
Here's the box of that TTi of mine. So, does having a wrong blade on the wrong tool a problem?@edap617 said:
It's either one of the two situations:
If it is a "Ti" it got the wrong serrated blade and wrong plier jaws.
If it is a "TTi" it got the wrong plain blade.It is a TTi and it got a wrong plain edge blade...
But then again, there is nothing wrong with having a 154CM blade. That TTi is unique and it is a colector's item -
To be honest, I like 154CM better than S30V at times.. 154CM is easier to sharpen too! Oh and S30v is sort of brittle to the edge can chip rather than dull it...
-
Is that true lm123? but i'm not much into knives. I used the pliers and screwdrivers more often. S30V or CM154, I think they are just the same.
-
I believe so! I know that S30v is a harder steel thus is more brittle. Like the tungsten carbide wirecutters found on the Gerber 800 Legend-they are so hard there brittle!
-
@teofilo said:
Is that true lm123? but i'm not much into knives. I used the pliers and screwdrivers more often. S30V or CM154, I think they are just the same.For all intents and purposes they are. They are different formulations of knife steels that are both quite highly regarded. Of course, s30v is indeed a newer steel and therefore much better. ::)
The knife industry survives by selling you knives that are high enough quality that you will never need to buy another one, at least until next year when a "new" steel is discovered, or an old steel is rediscovered and you have to buy a new one because it's so much better than the one you had last year. Of course, what was the greatest thing last year is probably not very good ::) by this year's standards.
Frankly, I have owned many knives in many different steels and there are many factors that make up a good blade, and steel is only one of them. Edge geometry and grind are much more important IMHO- look at a SAK blade for example. A SAK cuts as well as anything else but is made from what is considered by many to be a "crappy" steel.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



