Leatherman Custom Wave
-
I wish they would give me free parts, I do a bunch to push the limits of Leatherman modification.
-
@Metropolicity said:
I wish they would give me free parts, I do a bunch to push the limits of Leatherman modification.So do I :D I would love if Leatherman could give Metro some free parts!
-
Leatherman just posted about 4 minutes ago:
@Leatherman said:
Yesterday we were honored to have Dave Canterbury from Discovery Channel (and soon to be Outdoor Channel) and his wife Iris visit us here at Leatherman and take a tour. He was so gracious with his time and has an extensive manufacturing background. We built a one-of-a-kind tool just for him that has all the features HE asked for then engraved it for him. No plans for full production at this time, but we’ll keep you all posted. Check out the album if you want the full details on what the tool features. -
@Xelkos said:
So much for Leatherman's stance on custom tools, and factory photos on tours. If you are famous enough or have the financial influence anything is possible.

I don't think financial influence has anything to do with it. Dave has always portrayed Leatherman in a positive light in his youtube videos and elsewhere; he has nothing but good things to say about the tools. so yes, Leatherman made him a custom tool, but they're getting celebrity endorsement and "free" advertising in return.
Leatherman's representatives have stated over the years that they do not make custom tools - period. Was more of a broad spectrum comment, as a lot of us have been told it just doesn't happen. But it did.

Looks like Leatherman got a great presentation on Dave's Survival Classes too. Who knows, there may be a seasonal Leatherman Pathfinder package offered later on, complete with a Pathfinder version multitool. :D
-
Another photograph posted from Leatherman:
@Leatherman said:
This Wave has the awl, jaws and screwdrivers from the Rebar and a S30V knife blade from the Charge TTi. The second knife blade that comes standard with the Wave (420HC) has been specially ground and sharpened to flex/act like a fillet knife. The Bit drivers have been taken out to make room for the tools Dave requested.
Wave is getting sexified!

-
So if I want to customize my Charge TTi to get it up to standards I either have to get even more
infamous, or buy a Rebar & figure out how to align those darn washers....
-
I wish they would give me free parts, I do a bunch to push the limits of Leatherman modification.
So do I :D I would love if Leatherman could give Metro some free parts!
To my knowledge I was the first to shove rebar plier heads into a wave/charge.
-
I wish they would give me free parts, I do a bunch to push the limits of Leatherman modification.
So do I :D I would love if Leatherman could give Metro some free parts!
To my knowledge I was the first to shove rebar plier heads into a wave/charge.
You've got my vote, Metro!
I wouldn't have had the guts to try making a ReCharge if I didn't have your Black Tide thread to follow.even if they just invited you to the factory for a day and let you go nuts... I'd love to see what you could come up with. I'd even chip in to help pay for your flight to Portland! :D
-
I wish they would give me free parts, I do a bunch to push the limits of Leatherman modification.
So do I :D I would love if Leatherman could give Metro some free parts!
To my knowledge I was the first to shove rebar plier heads into a wave/charge.
You've got my vote, Metro!
I wouldn't have had the guts to try making a ReCharge if I didn't have your Black Tide thread to follow.even if they just invited you to the factory for a day and let you go nuts... I'd love to see what you could come up with. I'd even chip in to help pay for your flight to Portland! :D
That would be pretty amazing, I'll make my way there eventually. Maybe I can ask for that for Christmas.
-
[quote author=Metropolicity link=topic=39472.msg633376#msg633376 date=1345755641]
I wish they would give me free parts, I do a bunch to push the limits of Leatherman modification.So do I :D I would love if Leatherman could give Metro some free parts!
To my knowledge I was the first to shove rebar plier heads into a wave/charge.
You've got my vote, Metro!
I wouldn't have had the guts to try making a ReCharge if I didn't have your Black Tide thread to follow.even if they just invited you to the factory for a day and let you go nuts... I'd love to see what you could come up with. I'd even chip in to help pay for your flight to Portland! :D
That would be pretty amazing, I'll make my way there eventually. Maybe I can ask for that for Christmas.
[/quote]if you can make it, I'll pick you up at the airport...

-
I have watched a lot of Dave's YouTube videos. I have always found it interesting that he has no use for scissors or serrated blades.
-
Sorry, not all that impressed. Metro's pushed the envelope further on those tools.

OK, so, Rebar head, which isn't a big deal if he ditches the scissors, as Metro's shown. Rebar awl, that's a simple swap for a flat driver. I've done three Wave or Charge tools with the full-size Phillips and flat drivers, a kid can do that.
The only impressive part is the second blade. Not sure, but it looks like the serrated blade, thinned, with the serrations ground off and reprofiled into a sorta wharncliff profile. Personally I have no use for a fillet blade on a multi, but hey, whatever trips your trigger. :D
-
@Gryffin said:
Sorry, not all that impressed. Metro's pushed the envelope further on those tools.
OK, so, Rebar head, which isn't a big deal if he ditches the scissors, as Metro's shown. Rebar awl, that's a simple swap for a flat driver. I've done three Wave or Charge tools with the full-size Phillips and flat drivers, a kid can do that.
The only impressive part is the second blade. Not sure, but it looks like the serrated blade, thinned, with the serrations ground off and reprofiled into a sorta wharncliff profile. Personally I have no use for a fillet blade on a multi, but hey, whatever trips your trigger. :D
The awl needs a tiny bit of work to make fit. The cutting edge needs a bit of a grind off to make fit, it's a lot better than grinding off the top portion of the awl to make the Rebar head fit. I also didn't want to damage the BO on my Awl so grinding the cutting surface was my only option.
I JUST watched the video despite it being posted in various places that I visit. I noticed a few interesting things. Ben uses something very simliar to what I use to assemble and adjust the screws on my tools, I swear I had never see it before but it makes me feel good about figuring and designing something that the company actually uses themselves.
I also noticed that Ben was grinding the sides of the Rebar head a bit, which I question as a structural thing, but this does give me ideas how how I can VERY careful mill off a bit of the 'pawls' on the Rebar head to accommodate the internal scissors.
I would kill to be there for a day and have licence to make and mod tools with parts ready to be put together in case something doesn't work. If they really read these forums...they'd know what to do ahemflymedowntothefactorycough
On a related note, Shane from Multitasker tools emailed me the other day thanking me for plugging MTasker on my application to Leatherman (Industrial Design Position). He's sending me a brand new Series 2 Mulitasker, a few plier heads, spare BO parts and some empty handles. Now that's something I can get behind. :)
I smell Multitasker Skinth very soon.

-
Dave must not know about MTO... why did they put the lanyard loop on the wrong side of the awl? And why didn't they start off with a Charge base if he wanted a lanyard loop??
Touring the Leatherman Plant and Building a Custom Tool
Now I should refer everyone over to Charger's post on his alwsome Wave modification. Works great on a Charge TTi as well. :D
Soon as I get my paws on a Rebar...

-
oh yah, I forgot that the awl's cutting edge needed to be ground down a bit because it would bottom out on the outside opening blade spring lock tabs. About .5mm needed to be taken off the tip (and subsequent edge to make it sit flush when closed).
Ben skipped out on grinding that portion and ended up thinning out the awl's top portion.
Whichever the case...to each their own for tools and effectiveness.
Awl installation documented here: /post/608351
-
Used an ST300 awl which required very little grinding.
However I messed up trying to polish the awl, and I've used mine quite a lot and it shows signs of use. It could stand a replacement.Leatherman has a no questions asked warranty, correct? :D Would like to get the awl back onto ST300, it seems nekked without it.
Will wait to acquire a Rebar to do any more retrofitting. That may be a while, still unemployed.
-
Well, I picked up a Rebar and a nice $20 used Wave to do this mod, but I've decided not to. Why? I like the Rebar too much and can't get on with the OHO blades on the Wave.

-
Got to love how they make a custom tool, with next to no custom parts.
I love LM but they need some serious competition to nudge some innovation.
Unless of course they did this whole thing to test the waters on how eager the masses are for the option of custom tools. Gotta wonder why they chose wave over charge. Now granted I haven't watched the vid if they say so in that.
I just hope that machining gets so cheap, that having custom parts made for doing our own mods becomes affordable.
I love grinding stuff but my hands and wrist aren't what they used to be, so If I could buy or have made what I want , it would be awesome.
-
I removed the small bit driver from my charge tti and put in a spare flat screw driver I had ground down into a awl. Worked great. I had to trim the handle of the scissors just a tiny bit and move the other flat blade over and shorten it just a bit.


-
Castum Wave

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login