And so it begins.... (My adventures into Alox!)
-
Mhhhhmmhmh... Backtool Alox.

-
@nj2656 said:
Curious as to what the set of scales with the back tool cut out are to be used for. I missed that the first ten times I have read this(top left).Ah you spotted those eh? I did the cutout before anodize so it would look stock and smooth. It's going to an 84mm alox golfer. Im going to do a hidden 4th pin so I can get backscales on. :D
-
In a trade with Aaron (bushido) some time ago I got a set of unfinished Ti scales. I just finally got up the nerve to start working on them to make a Ti urban pioneer. I had to come up with a jig to round and smooth the scale edges and then went through many many sheets of all the grits of sandpaper I had up to 1000 grit to get a nice shiny surface. So... about 3 hrs per scale just to surface finish. :D
Aaron is smurfing crazy to have cut these things out by hand with a jewelers saw and hand finish so many of them. NOW I see why it was such a big deal for him to be doing Ti on SAKs by hand.. its HARD and time consuming to finish Titanium!! Oh well, the one I got done so far looks very pretty and hopfully its partner will take less time.. then onto the liners! :D
Here are some pics of the finished one compared to the unfinished.



-
Oooh shiny!
Any progress on the bits for my little knife yet? :D
-
Any progress on the bits for my little knife yet? :D
Still waiting on springs. They're sitting as a low priority job at a machine shop waiting to get surfaced. :( Aaron keeps checking on them but they still arent done. Apparently they tried on one machine but that didn't work, so they are waiting their turn on the machine with the more powerful electromagnetic chuck.
-
Hey you missed a spot lol
jk. Those look 
-
Oooh shiny!
Any progress on the bits for my little knife yet? :D
Still waiting on springs. They're sitting as a low priority job at a machine shop waiting to get surfaced. :( Aaron keeps checking on them but they still arent done. Apparently they tried on one machine but that didn't work, so they are waiting their turn on the machine with the more powerful electromagnetic chuck.
And it was all going so well! ::)
-
Oooh shiny!
Any progress on the bits for my little knife yet? :D
Still waiting on springs. They're sitting as a low priority job at a machine shop waiting to get surfaced. :( Aaron keeps checking on them but they still arent done. Apparently they tried on one machine but that didn't work, so they are waiting their turn on the machine with the more powerful electromagnetic chuck.
And it was all going so well! ::)
I'm trying to be patient and work on other things in the mean time, but I'll be one happy modder to finally get the springs in hand and put them to work. :D
-
I was thinking about trying a pivot mod next as well.
However, since I'm from metric Germany (:P) I think I'll make some custom 3mm diameter pivots myself. How big is the hole in the Alox tools?You guys redrill to get 1/8 inch, which is around 3.17mm. If I make 3mm pivots, will they fit directly?
I know I would have to drill the 91mm tools, but what about the 93 ones?Oh, one more thing: If I get a Farmer and replace the saw for scissors (can't go with a Pioneer, because I need the liner), do I even need a solo spring or can the saw spring handle it as well?
-
@crackout said:
I was thinking about trying a pivot mod next as well.
However, since I'm from metric Germany (:P) I think I'll make some custom 3mm diameter pivots myself. How big is the hole in the Alox tools?You guys redrill to get 1/8 inch, which is around 3.17mm. If I make 3mm pivots, will they fit directly?
I know I would have to drill the 91mm tools, but what about the 93 ones?Oh, one more thing: If I get a Farmer and replace the saw for scissors (can't go with a Pioneer, because I need the liner), do I even need a solo spring or can the saw spring handle it as well?
Now you're hooked! You'll be ordering donor knives left and right now! :D
For hole sizes.
Standard 93 mm alox - Tool holes are 3mm, center spring hole is 2.5mm
Standard 91 mm - Tool holes are 2.5mmSo.. if you made 3mm pivots you can use directly on the 93mm alox frame for the tools, and just have to drill the 91mm tools out to 3mm and that would be perfect. You will also have to drill the center springs to 3mm from 2.5 as I dont recommend trying to make a tiny 2.5mm pivot, just make up all 3mm pivots and you will have me jealous! :D
The pivots I use are 1/8 inch hardened steel with 2-56 threading all the way through in a single threaded cut.
A saw spring would be too thin to use with scissors, unless you didnt mind a gap, which I would and it would bug me... if you aren't as picky you can add washers and it will be functional. But I sense you would want it perfect as well... :D
Happy to help with any other tips, just let me know. Also if you get 3mm pivots made up, I'll be quite jealous and might have to finally do that myself. I buy them in bulk for about $1.50 USD each though, so I don't know how many Id have to get made up to make custom 3mm ones cost effective. Of course if you have a lathe and can drill and tap your own, and harden them that works too!
Cheers!
-
I'll have some 3mm pivots made with a M2 threading inside.
The only thing I'm still not sure about is the material I should use for the pivots. The drill bits for cutting threads this small are extremely fragile so you can't really use hardened steel in the first place.
I think I'll go for a standard stainless steel. Let's see.Screwwise I'll use the button shaped ones, however they don't seem to be that common here in Germany.

Button heads would be the one on the left, while the one on the right is called a "Linsenschraube" (lentil screw). The slant part however could compromise the fit.
A lot to fiddle around still. :D
-
These pivots I have are 302 Stainless, spring tempered. You want to end up with something somewhat similar in hardness to the SAK tools I would think, so you don't get one galling the other.
Then again the Vic nickel silver pivots are quite a bit softer than the tools so they would be yielding to any tool wear... hmm maybe it would only matter after a very long time. Or maybe it would matter more on a pivot since the walls are much thinner.For screw style I prefer the countersunk type, so they are flush with the scale surface. Feels nicer in hand.
Regardless Im curious to see what you come up with!

-
I ordered a Solo and a Farmer. Will use the scissors from my Compact's donor Explorer.
Exciting stuff. :)I will send the scales of the Solo to my anodizer to have them PulseCoat treated. It's a special hard anodize he does exclusively.
Here's a shot of a yoyo we had done with this technique:

@Syph007 said:
For screw style I prefer the countersunk type, so they are flush with the scale surface. Feels nicer in hand.So you don't use button srews? But I guess you still have the pivots go into the scales and not flush with the last tool?
-
Well I have no fingerprints left from all the sanding, but I got the Ti urban pioneer finished. All Ti except the springs and tools. :D It turned out darn nice I think.
It looks like a SAK from the future... ;)






-
WOW!
-
very pretty... and shiny :D

-
Very nice!
Sent from my Galaxy Nexus using Tapatalk 2
-
Very nice Syph007, as always very impressive! JR
-
Just excellent... a total evolution of the SAK

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login