And so it begins.... (My adventures into Alox!)
-
I have a spartan lite and it is the small inline :)
-
Blade spring from a non-Solo knife, I guess.
Mh... blade springs are the least expendables. :-X
Let's see. :) -
@crackout said:
Blade spring from a non-Solo knife, I guess.
Mh... blade springs are the least expendables. :-X
Let's see. :)Exactly.. and then you think man I have to waste a pioneer just for the spring... think a few more moves ahead in this chess game and you'll arrive where I did... it makes sense to make up springs. :D
-
So you grind down your custom scissors springs or do you have an extra design?
You could still get these one layer Pioneers (the Pioneer Pruner is actually still being produced) and use the blade as a replacement (pivot assembly assumed).
-
@crackout said:
So you grind down your custom scissors springs or do you have an extra design?You could still get these one layer Pioneers (the Pioneer Pruner is actually still being produced) and use the blade as a replacement (pivot assembly assumed).
Yup I made my custom spring to have extra metal so I can grind down to use how I need it.
Pruner would work great. I thought it was discontinued too though along with solo/rancher/harvester.
I loved this SAK but it was a for hire job so it's long gone... I need to make another for myself.



-
So both retain their mod position snap in this example? And also with a blade spring?
Both the Solo and the Pruner are still listed on the site. Not sure if that's a 'yes' for still part of the line-up though. I can still order them both at Amazon no problem.
-
Finally got this sucker done... urban pioneer jr! Pioneer Cadet with scissors...

Red hard anodize with brass liners. The keyring had to go to make room for the awl and I made a custom piece in brass to take it's place.



Here is what the awl modification looks like.



-
Uah...that looks like a lot of work.
-

I wish I had some money to spend :( This thing looks just dreamy.

-
That is EXACTLY what I want. Love the awl.
:ahhh

-
I have to keep a close eye on you. Is the knife in your profile a mod? If so could we see a bigger picture. Also any progress on the backtool 84mm? After seeing the Mini Pioneer I can't wait to see what you do with that. A Mini Camper with the corkscrew or Hiker with the screwdriver.
-
@nj2656 said:
I have to keep a close eye on you. Is the knife in your profile a mod? If so could we see a bigger picture. Also any progress on the backtool 84mm? After seeing the Mini Pioneer I can't wait to see what you do with that. A Mini Camper with the corkscrew or Hiker with the screwdriver.lol, thats the one I did a few pages back with the electricians blade and combo tool.
Im working on the backtool mod next.

-
Im working on the backtool mod next.

Can't wait for that.
Anyone tried fitting a nailfile on a 93mm? Are there even bigger files than the ones from Cadets?
Lots have tried that. It sits too low in the knife for the nail nick to be used. I had a idea for tools like that to fit but it's very time consuming and costly.
-
Im working on the backtool mod next.

Can't wait for that.
Anyone tried fitting a nailfile on a 93mm? Are there even bigger files than the ones from Cadets?
Lots have tried that. It sits too low in the knife for the nail nick to be used. I had a idea for tools like that to fit but it's very time consuming and costly.
Ya the only way I can think to make use of the 84mm parts on 93 would be to make a custom spring with fatter ends to hold the tools up higher.
-
I was thinking of making a very small carrier that would be the same size as a 91mm tool. I don't have anything to draw up one though so the thought is still in my head :(
-
I was thinking of trying that with a 58mm scissors to put in place of a can opener, but when I looked at it, it was so much fiddly work to make, I lost interest.
-
Yep that was me too. Plus it's so thin I was afraid after all the work it would snap.
-
Well I've been awaiting this day for 4 months now... that's right... urban legend no more... I have custom scissor springs! :D
Here is the original concept model I did. The idea was to make a spring that can be used for multiple tools simply by grinding the nub rest down. This should allow the spring to work for scissors, pliers, saws, really anything. I could even use 84 mm tools like the 84mm combo tool in the main blade layer by leaving enough metal to hold the combo up higher than the stock 93 springs would.

Anyways.. all the steps in this process did work out except the last. Succesful laser cut and heat treat, but the shop we tried to get them thickness ground couldnt do it. Instead of waiting longer I decided just to hand surface some and get the ball rolling on actually using these things.
The best tool I had to surface is the belt sander, so I had to make a aluminum heat sink and mount some pins to hold the part. The handy thing about these being springs is I could get them to tension against a pin placed just right and it was held quite nicely.


Grinding this way was slow, but successful. I had to stop alot to water cool and measure each end to make sure im grinding evenly along the whole surface. Slow and steady here was the key, but it did work out fine. These started at 0.155 and I took them down to 0.110 inches.
Here is a finished and polished part next to an unfinished one that was what I started with. This is how ugly they look after the heat treat, but they sand and polish up beautiful. I've worked a lot with vic springs and these look exactly the same side by side when both are polished so my custom ones will blend right in with the stock ones in the mod. Finally!!!! :D :D :D




When I get time later I'll show how they fit up with the scissors and what the action is like.
Cheers!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login