Favorite Gerber?
-
Well, I chose, and apologized to my Gerbers that didn't make the cut.... ;) I went for my little workhorse, the MP450. It was my first Gerber, the cause of this sickness. :) The Octane and Strata were close, and the MP600 in its various guises is a great tool as well. I just got a Pro Scout a couple of weeks ago, so give it a bit of time, Gareth, maybe they'll hang us together. :ahhh :D
-
I only have 2 models of Gerbers, but I had to give the edge to the Dime over the MP400. The fact that I have to completely open the 400 to get to the implements just annoys the f@#$ out of me. The Dime certainly leaves alot to be desired but I love the package opener, the cap lifter, and pliers on that little bugger.
I have my eyes on an Octane, though, as soon as the money is available.
-
Well, I ended up voting for the MP700 :)
The Dime is great. For me it's the best keychain sized pliers tool anyone has come up with. The tool set is good, the bottle opener blows the Squirts and Micras out of the water. The pliers and blade are very nice, and the package opener is brilliant. The tweezers aren't the greatest ever created, but they're better than the ones on a Squirt ;) I do have some reservations about the scissors ... that design has shown a few failures, particularly on Leatherman models as they've been around a little longer and had more chance for the springs to weaken. As for the file ... well that's a bit of a joke :P
The MP700 though ... sprung pliers with a good sized head and fine tips and carbide cutters. All outboard tools including the all important scissors, which of course are Fiskars and work great. The drivers are great, particularly the Philips which adopts a nice central position when open. The blade is probably the most non-knife-person friendly blade on any full sized multitool, and even though it locks it's not going to unnerve anyone but the most paranoid of onlookers ... plus it's OHO. I quite like the tweezers too actually ... there's no losing those ;) The only downside is the spring mechanism does weaken the pliers slightly, and they're not as robust as they look. I've seen a few with sprained pivots, which then ruins the wire cutters too
I suppose the Strata is effectively the "replacement" for the MP700, but for me the MP700 is still the better urban tool. In that respect, it's a legend :P :D :D :D
-
I voted for the Diesel. It has the best of what I need, and has the best or largest wire cutter area. I replaced the flat Phillips with the 3D Phillips from an old 600 and now it has a decent driver set too. All around good tool.
-
The US Army issue 600 with ACU sheath just have that cool factor.
Made in USA. -
MP600 family gets my vote.
:D -
@Fishnuts2 said:
I voted for the Diesel. It has the best of what I need, and has the best or largest wire cutter area. I replaced the flat Phillips with the 3D Phillips from an old 600 and now it has a decent driver set too. All around good tool.that sounds very interesting, have we see an picture of it?

:D -
My votes gone for the 400 family,mostly based on the fun I have with my MP425,but there needs to be a special shout for Mr Pinchy,and the Clutch Family
-
I'll try!

-
MP400 for me , great little tool
-
@Fishnuts2 said:
I'll try!excellent mod.
Mind if I ask what you had to sacrifice to get it in there? -
I'll try!
excellent mod.
Mind if I ask what you had to sacrifice to get it in there?I only needed to delete one of the small drivers which I never used anyway.
Wayne
-
black oxide mp600's are sexy!
-
I always had a little place for the Flik. The small drives and can opener sucked, but the blades and scissors kicked ass. And the pliers deployed fast and one handed.
sent from Ducttapetech's roaming device
-
It's no big secret that I've been enjoying my Flik for the last month or so. No-one is more surprised than me that I actually seem to really like it. :D Still, I voted for the MP400 before and I don't think the Flik has changed my mind. Not quite anyway. ;)
-
I've never tried a Flik , they look quite usefull
-
@Dunc said:
I've never tried a Flik , they look quite usefullIf it wasn't for my doubts over the Phillips I'd be a lot quicker to recommend them.
@Ducttapetech, is the Phillips on yours totally useless? On mine it wouldn't even look at fitting a screw head, let alone be bad at turning it. :-\
-
-
I've never tried a Flik , they look quite usefull
If it wasn't for my doubts over the Phillips I'd be a lot quicker to recommend them.
@Ducttapetech, is the Phillips on yours totally useless? On mine it wouldn't even look at fitting a screw head, let alone be bad at turning it. :-\
Some screws it did ok. Some, not happening. Just slipped out out of the screwhead. A big problem was the driver was just not long enough. What is weird is that leather use 2d drivers and work great most of the time. I think if the Flik driver was a tad thicker it would work great.
sent from Ducttapetech's roaming device
-
I've never tried a Flik , they look quite usefull
If it wasn't for my doubts over the Phillips I'd be a lot quicker to recommend them.
@Ducttapetech, is the Phillips on yours totally useless? On mine it wouldn't even look at fitting a screw head, let alone be bad at turning it. :-\
Some screws it did ok. Some, not happening. Just slipped out out of the screwhead. A big problem was the driver was just not long enough. What is weird is that leather use 2d drivers and work great most of the time. I think if the Flik driver was a tad thicker it would work great.
sent from Ducttapetech's roaming device
interesting. The problem with mine was that it was way too thick.
I suspect a little inconsistency in the making of this Phillips. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
