Favorite Gerber?
-
MP600 family gets my vote.
:D -
@Fishnuts2 said:
I voted for the Diesel. It has the best of what I need, and has the best or largest wire cutter area. I replaced the flat Phillips with the 3D Phillips from an old 600 and now it has a decent driver set too. All around good tool.that sounds very interesting, have we see an picture of it?

:D -
My votes gone for the 400 family,mostly based on the fun I have with my MP425,but there needs to be a special shout for Mr Pinchy,and the Clutch Family
-
I'll try!

-
MP400 for me , great little tool
-
@Fishnuts2 said:
I'll try!excellent mod.
Mind if I ask what you had to sacrifice to get it in there? -
I'll try!
excellent mod.
Mind if I ask what you had to sacrifice to get it in there?I only needed to delete one of the small drivers which I never used anyway.
Wayne
-
black oxide mp600's are sexy!
-
I always had a little place for the Flik. The small drives and can opener sucked, but the blades and scissors kicked ass. And the pliers deployed fast and one handed.
sent from Ducttapetech's roaming device
-
It's no big secret that I've been enjoying my Flik for the last month or so. No-one is more surprised than me that I actually seem to really like it. :D Still, I voted for the MP400 before and I don't think the Flik has changed my mind. Not quite anyway. ;)
-
I've never tried a Flik , they look quite usefull
-
@Dunc said:
I've never tried a Flik , they look quite usefullIf it wasn't for my doubts over the Phillips I'd be a lot quicker to recommend them.
@Ducttapetech, is the Phillips on yours totally useless? On mine it wouldn't even look at fitting a screw head, let alone be bad at turning it. :-\
-
-
I've never tried a Flik , they look quite usefull
If it wasn't for my doubts over the Phillips I'd be a lot quicker to recommend them.
@Ducttapetech, is the Phillips on yours totally useless? On mine it wouldn't even look at fitting a screw head, let alone be bad at turning it. :-\
Some screws it did ok. Some, not happening. Just slipped out out of the screwhead. A big problem was the driver was just not long enough. What is weird is that leather use 2d drivers and work great most of the time. I think if the Flik driver was a tad thicker it would work great.
sent from Ducttapetech's roaming device
-
I've never tried a Flik , they look quite usefull
If it wasn't for my doubts over the Phillips I'd be a lot quicker to recommend them.
@Ducttapetech, is the Phillips on yours totally useless? On mine it wouldn't even look at fitting a screw head, let alone be bad at turning it. :-\
Some screws it did ok. Some, not happening. Just slipped out out of the screwhead. A big problem was the driver was just not long enough. What is weird is that leather use 2d drivers and work great most of the time. I think if the Flik driver was a tad thicker it would work great.
sent from Ducttapetech's roaming device
interesting. The problem with mine was that it was way too thick.
I suspect a little inconsistency in the making of this Phillips. 
-
Not sure. I was thinking if it was a think as a leatherman bit, they could cut a better and deeper head in it. If that makes sence.
sent from Ducttapetech's roaming device
-
Hard for me to say as I own so many Gerbers! I like the older models better as they seem to be better quality overall, but I use a Fit everyday at work and it is nice. It is the only MT of its type that is any kind of quality at all. I have two Freehands, one black oxide, and one stainless, and like them both quite a bit. I also own two MP600's one BO, one SS and a 650. I own several more of the later models also, but they are mediocre to good at best.
-
I have a lot of Gerbers as well, and quite honestly I like just about all of them. The Crucial F.A.S.T. is actually quite a nice little tool that gets little exposure, probably largely due to the original Crucial which is pretty crappy.
I'm not sold on the Fit, but I think that's more due to it being such a radical departure from the types of tools I am used to carrying and using, plus it's not terribly portable, which loses it a lot of points in my mind. Still, I agree with Mike, it is the best of it's type of tools, or at least the best I've seen.
The MP600 series is classic- they are as proven as any tool gets, and one could make a career out of just tracking down and obtaining every MP600 variant there is.
The Flik is quirky but I like it a lot and it's one of my regular EDC tools- and amusingly enough it saw some carry time yesterday because I couldn't find my Steady as I headed out the door!
My favorite Gerber? I doubt I could pick just one. There are some that are kind of useless and absurd, there are others that are no nonsense, tough as nails tools and lots in between and I appreciate them all for what they are.
Def
-
Embarrassing, but I like the BG compact. I love the design. :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
