A "how-to" for basic SAK mods. Pic heavy.
-
Wait, wait! I think I might have just got what you were saying. If we are talking about the blade layer am I right in thinking that the spring is jumping off the corkscrew? Someone (and I forget who now) once suggested that using big bulldog clips to hold the layers together while building can help keep everything in place.
-
honored to have you answering my noob questions.
i got it figured out what i was doing wrong. I wasn't putting the back accessories and pin in for some reason misthinking i would do it later.
once that stuff goes in, everything is held together
thanks again for the response and for the post.
I got my camper back together minus the wood saw (so it's a homemade spartan now i believe)
whew for a noob, and i should say i was working with brass stock that was hardware store bought 3/32 and nail the proper size for the 2.2mm center pin.
I'm going to try it for a few days to make sure it's solid and then start to work on the other one.
I was thinking of taking bottle and can open layer off super tinker and add wood saw.
I wanted the phillips instead of corkscrew.
think i saw that mod in the huge mod thread, which i looked at every pic :sak:
-
for the corkscrew i found it was easiest when it was extended to get the spring in place.
also this project gave me a proper respect for my LM wave, very helpful tool to have around when doing this sort of stuff....
-
very glad to hear you got it sorted WiSAKfan.
Now we really do insist on you adding pictures of your mods when they are complete.
:D -
well i took it apart again,
was thinking of going a nice slim package of big blade, small blade, saw and awl on back under blades but it doesn't seem to be the right fit
perhaps the corkscrew is sized to go under the blades?
-
Normally the corkscrew is the back tool for the blade layer and the awl for the caplifter layer.
-
yeah i know that's the way it normally is....
I removed the caplifter layer but wanted to use the awl in place of the corkscrew.
with the awl in that spot the big blade doesn't want to snap open
-
did anyone experiment with the DIY press made with a clamp like pictured?
-
Sorry for the probably ridiculous question but where can someone buy pins for sak mods, and what exactly should I ask for ?
I live in Greece and I dont know how could I ask for them in a hardware store? -
you are looking for pin stock. most of the time it is made of brass.
for size, it depends on what models you are modding.
for example the 91mm SAKS use 2.5mm stock for the outer holes and 2.2mm stock for the inner holes. don't be surprised if you can't find 2.2mm anywhere. we sand down the 2.5mm stock to 2.2mm by putting a piece of stock in a drill and using sand paper to thin it out.
in the usa, at least where i am you can't just walk in and buy stock in mm. 3/32" is the closest one in my experience.
good luck.
post back with any other questions, people are happy to help
-
If you have a model making shop (train sets, remote control cars, that kind of thing) they will sometimes stock brass rods for people who make their own backgrounds, buildings, set pieces etc.
A quick google came up these guys who might stock that kind of thing: http://www.diorama.com/index.htm
-
Hey Gareth, just wanna thank you for the walk-through! You helped me convince myself to tackle modding my girlfriend's Classic.
Here's my build thread. Thanks again for the tutorial.
</topic/42615 -
You are very welcome mate.
I am just glad to hear folks are still getting some use out of it. :) -
Alright everyone. I think I am going to try my first real MOD. :ahhh I just need to find some part now.

I hope I have the actual tools need to do it as well.
-
Good luck.
And pics of your project are always welcome. :D -
I have been lagging on this big time. Hopefully it will happen sooner than later.
-
Ok, seriously thinking about modding my damaged Ranger...
But the bodyplate is of the old style... So, if I get a new small blade for it, I'm going to need the birds head spacer for it, AND the new main blade, AND the new body plate...
Is that right?
-
Thanks for the how to ! Makes it a lot easier to make the plunge into mods. Thanks again
-
You are very welcome.

-
Great thread. Thanks! What is the make/model of the drill press vise you are using? Thanks again.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login