Cycling EDC
-
Yep stealth all in my backpack,although i usualy use my hydration pack for mtb'ing but sometimes its a squeeze ,my road bike is a much lighter set up but i prefer getting off road and away from the crappy car drivers around here :D
-
@ryan1835 said:
why carry the Co2 if you have a pump? more to carry plus a pump always never runs out! (can understand Co2 in a race situation i guess)what clothing do you wear? now its getting colder im starting to look for jackets /long jerseys
I have numerous cycling jerseys, bibs and shorts. For the colder weather I just use arm/ leg warmers by Capo Roubaix and fingered gloves. I have the Showers Pass Club Pro Jacket for riding in the rain (not a habit but I tend to enjoy it). It doesn't get too cold here but when it does it's not good to be out on a bike because it's usually freezing rain or the occasional snow.
@stantrb said:
Crunch and some bits. Those locking pliers are invaluable on the trail.S.
You have a bit driver on your Crunch??? :ahhh :ahhh :ahhh :ahhh :ahhh

I would love to see it, if you do. Also, what driver did you use to put it in the Crunch?@Zed said:
Yep stealth all in my backpack,although i usualy use my hydration pack for mtb'ing but sometimes its a squeeze ,my road bike is a much lighter set up but i prefer getting off road and away from the crappy car drivers around here :DYeah, I heard y'all don't have bike lanes? One of the pros I follow on Strava was furious about that when doing his time trial/ pre race recon for the Olympics. Here in Texas, as with most of the colonies, we have feeder/ access/ frontage roads (roads that are parallel to the main highway but slower) that are nice to ride on at times. Some cities, like Austin, where I'm from have actual bike lanes and cars have to yield to the cyclists (well, they're suppose to). Those aren't on major highways, of course, but on some very busy roads.
I attached a photo of myself the day I bought my Orbea. I rode it home from the shop, only 13 miles or so. It was one of the proudest moments of my life.


-
Bike lanes are a must. The good thing is that in my area there are some new bike lanes that lead to large parks/forests, suitable for cycling. (cycling for me is just for fun).
Cycling on minor roads is OK, but cycling on main roads here is too dangerous, as Bicycles on the roads are not common, so no respect is given to cyclists.
I used to cycle a lot more, for short distances, in the UK, especially when going to the city centre, but cyclists on the road were pretty common there.
-
Very nice bike steath
we do have the odd cycle track but there isn't enough and most drivers don't give a smurf for cyclist,although I've raced most type of bikes over the last 30 odd years its mtb'ing that I've grown to love over the last 23 years. I've had some great adventures off road and seen some amazing scenery . 
-
going mountain biking tomorrow, going to take a rucksack with a spare tube, pump ( and shock pump as still setting it up) chain tool bike multi tool (has most allen keys i need and screw drivers) a couple of cans of coke a rain coat and probably lunch! will have water bottle on my bike
havent been brave enough to fit clipless pedals to the mountain bike yet!
-
I ride 10 - 14 miles every night and carry more stuff than I do during the day. I have a leatherman OHT that has come in handy as well as a bike allen key mutitool. The absolute most important thing at night is a strong headlight and a red tailight. It makes things so much safer cars make a noticeable effort to stay away from you. My headlight is a maglite pro and my tail light is a superflash. I do much of my riding in industrial areas on my way to the park and avoid traffic as much as possible. This really keeps the stress level down and makes riding way better.
I used to have a mini pump and carry a tube until I discovered slime. The combination of thick tubes and slime make it possible for me to run over pickers and crap without worry. Slime does such a good job I rarely have to put air in my tires.
I also have a paramilitary 2 and a Fenix L10 on me when I ride. -
Hey S-man007... been meaning to make a post here, but have been lazy...

My cycling toolkit is a Crunch, a 4" adjustable Crescent wrench, a trio of nylon tire levers, a spoke wrench, a chain tool, a self-adhesive patch kit, a spare tube, and a set of individual Bondhus hex wrenches. That all lives in a dedicated pouch that I strap into a spare waterbottle cage. I also carry a small pump on my frame.
Usually on my person is at least one SAK with pliers (they are awesome for digging stuff out of tire treads when fixing flats), and a regular MT. Used to be my Skele CX until I lost it, so lately it's been my S2.
-
Great idea to carry the Crunch. Until the other day, I had no idea the Crunch had a bit driver capability. All this time I've been carrying the MTs that had that capability only. Totally changes the way I think about my EDC overall not just for my bike. Having the vice grip capability and bit driver is huge for me in my EDC.


-
I don't bike often, but here 's the tool kit I've cobbled together:
LM Style PS - I like the spring loaded pliers to remove thorns and prickly bits from my tires.
4 inch Crescent wrench
Stubby bit driver for the #2 Phillips bit. Also has a slotted driver, but don't think there are any slotted screws on the bike.
5mm Allen key/hex wrench. These bolts are everywhere!
Small patch kit, which does me no good since I need to pick up a frame mounted pump
2x lever wrenches, to remove tire and tube from the wheel
I need a chain tool, tooOther bits and bobs:
Spyderco H1 serrated rescue salt, in black. I don't know why I bring it, just do. Being a sheepsfoot blade, it would be great in an emergency.
Orange Camaelbak MULE, with 3L reservoir
Chapstick -
I bike the same 18 mile route every day (except for late fall through early spring) and all I take is a cell phone and a water bottle. If I get a flat I call my wife and she picks me up with the truck. I guess I'm not very self sufficient but it's all pavement and I haven't had a flat for over a year.
-
@getahl said:
I don't bike often, but here 's the tool kit I've cobbled together:LM Style PS - I like the spring loaded pliers to remove thorns and prickly bits from my tires.
4 inch Crescent wrench
Stubby bit driver for the #2 Phillips bit. Also has a slotted driver, but don't think there are any slotted screws on the bike.
5mm Allen key/hex wrench. These bolts are everywhere!
Small patch kit, which does me no good since I need to pick up a frame mounted pump
2x lever wrenches, to remove tire and tube from the wheel
I need a chain tool, tooOther bits and bobs:
Spyderco H1 serrated rescue salt, in black. I don't know why I bring it, just do. Being a sheepsfoot blade, it would be great in an emergency.
Orange Camaelbak MULE, with 3L reservoir
ChapstickLook for a small frame pump called the "morph". They make a road and a mt. version. I have the road version. The nice thing about it is that it's got a small fold out foot-peg on it, so you can hold it down with your foot while you're inflating your tire; lets you get a lot more air pressure in a tire that way, than just trying to hold both pump and handle in your hands.
-
My cycling EDC has been based on a Cool Tool for many years. Now that I have a new bike the Cool Tool will no longer work because it will not fit some of the fasteners that are used on newer bikes. I am starting to acquire the items for a new cycling EDC based on Heinz's kit. Today ordered one of these to carry everything in. Next on the list is a Crunch.

-
Here's a short vid on the pump that I use.
-
Same pump I use Heinz

-
@stealth007s said:
Same pump I use Heinz
Great minds think alike! :D
-
Sorry for necroposting. I bought one of these after my chain broke in the middle of nowhere and I couldn't fix it. http://www.topeak.com/products/Mini-Tools/hexus2
I wish there was a separate "Cycling" section on this forum... for Cycling EDCs etc...

-
I recently dropped the Charge and spare bits for this
<a href="http://www.flickr.com/photos/28754076@N05/8737035752/in/photostream" target="_blank" rel="noopener noreferrer"><img src="http://farm8.staticflickr.com/7285/8737035752_389b945220_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://www.flickr.com/photos/28754076@N05/8735917447/in/photostream/" target="_blank" rel="noopener noreferrer"><img src="http://farm8.staticflickr.com/7283/8735917447_e451480c3b_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I got this to replace my Leatherman Charge Ti and Spare Bit Kit in my under seat bag on my bicycle. This fits great in my jersey back pocket. Here are the specs of the tool from where I bought it at biketiresdirect.com
The b17 Multi-Tool includes the most-used bike tools in an innovative and compact package. Magnetic driver bits lock into either of the two drivers located at the corner edge of the tool body. When not in use the driver bits are held in rubber sleeves on the tool body that fold in for a compact size and to lock the bits in place so they don't get lost.
In the center of the tool body is a chain tool with spring-loaded removal. Once removed, the chain tool features a magnetic hex that fits into the driver for a better grip and leverage. 230 grams.
Includes:
1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Hex Wrenches
T10 and T25 Torx Wrenches
Flat and Phillips Screwdrivers (Two sizes each)
#0 and #1 Spoke Wrenches
Chain Tool -
Depends on the distance I'll be riding, but mainly:
-4,5,6 mm Allen wrenches.
-Co2 inflater.
-Tube.
-Patch kit.
-Tire lever.
-Chain breaker and extra links. (Usually just on longer rides.)-Water bottle and food (usually seeds/nuts).
-Phone, credit card, ID, $20.
I took my multi tool apart to mod it awhile ago, and haven't put it back together yet.
When I get around to that, that'll replace my loose Allen wrenches and chain breaker. -
@hiljentaa said:
Depends on the distance I'll be riding, but mainly:-4,5,6 mm Allen wrenches.
-Co2 inflater.
-Tube.
-Patch kit.
-Tire lever.
-Chain breaker and extra links. (Usually just on longer rides.)-Water bottle and food (usually seeds/nuts).
-Phone, credit card, ID, $20.
I took my multi tool apart to mod it awhile ago, and haven't put it back together yet.
When I get around to that, that'll replace my loose Allen wrenches and chain breaker.Please don't forget to post pictures of you mod when you get it put back together!
-
@Zed said:
well it was a wet and cold day, lots of mud and big puddles :D here is a pic of my stuff, not including tube under my saddle and altoids tin with batteries in my backpack i forgot to get out, although was pouring down :-\ if on my road bike i just have the saddle bag with tube,tire levers and my p4,stopped here and had a chat with sparky :D

Zed, what bars are those? When I first bought my Specialized Rockhopper it had rolling bars on it. For some unknown reason I went with a tapered flatbar, might of been when getting the Girvin Flexstem. Been trying to get back into riding, did a messily 4 miles to the dentist and back home today and am not liking the flatbar at all.


What I had before as a handlebar. Am so going back to a curved bar again!

Did go with this wide cruiser seat because it had no horn. Being over-weight a horned saddle was making me black and blue between the legs. Horrible sight, didn't feel very well either.
The horned saddle is great in that it keeps your butt planted whereas the hornless cruiser seems to be throwing me onto the bars. Yeah, I know, you aren't supposed to be on the saddle much. Am seriously out of shape and need to get back into shape, so cutting corners where I can and trying to save on gas too.
What do y'all use for cycle computers? Had a cheaper XLC but lost the instructions and even the company that made it doesn't have them. Today I pulled the meter off to get trip data; distance, trip time, average speed, top speed, ect. and the stupid thing was blank! It did add to the odometer, that was all. Grr.
Used to have a horseshoe shaped Cateye back in the day, the year they came out with a solar version. Wished had gotten the solar one, but they were very expensive.
Have to get a valve core tool yet... seems most bicycle supply sections do not have them, neither does the automotive sections. Those plastic valve core tools fail. Recently replaced the inner tubes with a sealant type, and one of the valve cores was in there probably at 40 fp! Broke both plastic valve core tools that came with the tubes. After locating a metal cap version it would not budge it either!! Grabbed the sidewall of the metal core cap with my Charge TTi and got the valve core removed!!! Gawd, someone was either bored or hated cyclists that day.
Looked around at the so-called cycle tools at Wally's World, Bi-Mart, all heavy cast and over $30. Not one have a valve core tool either.
Have always partially inflated the tube, squeezed and bounced it, then popped the valve core. Repositioned for a straight stem, then inflated it up to pressure. As one time had a pinched tube and sounded like a M80 going off when I got on the bike. Valve core remover works way better than pressing the stem and waiting for the air to escape enough.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
