Cycling EDC
-
I ride 10 - 14 miles every night and carry more stuff than I do during the day. I have a leatherman OHT that has come in handy as well as a bike allen key mutitool. The absolute most important thing at night is a strong headlight and a red tailight. It makes things so much safer cars make a noticeable effort to stay away from you. My headlight is a maglite pro and my tail light is a superflash. I do much of my riding in industrial areas on my way to the park and avoid traffic as much as possible. This really keeps the stress level down and makes riding way better.
I used to have a mini pump and carry a tube until I discovered slime. The combination of thick tubes and slime make it possible for me to run over pickers and crap without worry. Slime does such a good job I rarely have to put air in my tires.
I also have a paramilitary 2 and a Fenix L10 on me when I ride. -
Hey S-man007... been meaning to make a post here, but have been lazy...

My cycling toolkit is a Crunch, a 4" adjustable Crescent wrench, a trio of nylon tire levers, a spoke wrench, a chain tool, a self-adhesive patch kit, a spare tube, and a set of individual Bondhus hex wrenches. That all lives in a dedicated pouch that I strap into a spare waterbottle cage. I also carry a small pump on my frame.
Usually on my person is at least one SAK with pliers (they are awesome for digging stuff out of tire treads when fixing flats), and a regular MT. Used to be my Skele CX until I lost it, so lately it's been my S2.
-
Great idea to carry the Crunch. Until the other day, I had no idea the Crunch had a bit driver capability. All this time I've been carrying the MTs that had that capability only. Totally changes the way I think about my EDC overall not just for my bike. Having the vice grip capability and bit driver is huge for me in my EDC.


-
I don't bike often, but here 's the tool kit I've cobbled together:
LM Style PS - I like the spring loaded pliers to remove thorns and prickly bits from my tires.
4 inch Crescent wrench
Stubby bit driver for the #2 Phillips bit. Also has a slotted driver, but don't think there are any slotted screws on the bike.
5mm Allen key/hex wrench. These bolts are everywhere!
Small patch kit, which does me no good since I need to pick up a frame mounted pump
2x lever wrenches, to remove tire and tube from the wheel
I need a chain tool, tooOther bits and bobs:
Spyderco H1 serrated rescue salt, in black. I don't know why I bring it, just do. Being a sheepsfoot blade, it would be great in an emergency.
Orange Camaelbak MULE, with 3L reservoir
Chapstick -
I bike the same 18 mile route every day (except for late fall through early spring) and all I take is a cell phone and a water bottle. If I get a flat I call my wife and she picks me up with the truck. I guess I'm not very self sufficient but it's all pavement and I haven't had a flat for over a year.
-
@getahl said:
I don't bike often, but here 's the tool kit I've cobbled together:LM Style PS - I like the spring loaded pliers to remove thorns and prickly bits from my tires.
4 inch Crescent wrench
Stubby bit driver for the #2 Phillips bit. Also has a slotted driver, but don't think there are any slotted screws on the bike.
5mm Allen key/hex wrench. These bolts are everywhere!
Small patch kit, which does me no good since I need to pick up a frame mounted pump
2x lever wrenches, to remove tire and tube from the wheel
I need a chain tool, tooOther bits and bobs:
Spyderco H1 serrated rescue salt, in black. I don't know why I bring it, just do. Being a sheepsfoot blade, it would be great in an emergency.
Orange Camaelbak MULE, with 3L reservoir
ChapstickLook for a small frame pump called the "morph". They make a road and a mt. version. I have the road version. The nice thing about it is that it's got a small fold out foot-peg on it, so you can hold it down with your foot while you're inflating your tire; lets you get a lot more air pressure in a tire that way, than just trying to hold both pump and handle in your hands.
-
My cycling EDC has been based on a Cool Tool for many years. Now that I have a new bike the Cool Tool will no longer work because it will not fit some of the fasteners that are used on newer bikes. I am starting to acquire the items for a new cycling EDC based on Heinz's kit. Today ordered one of these to carry everything in. Next on the list is a Crunch.

-
Here's a short vid on the pump that I use.
-
Same pump I use Heinz

-
@stealth007s said:
Same pump I use Heinz
Great minds think alike! :D
-
Sorry for necroposting. I bought one of these after my chain broke in the middle of nowhere and I couldn't fix it. http://www.topeak.com/products/Mini-Tools/hexus2
I wish there was a separate "Cycling" section on this forum... for Cycling EDCs etc...

-
I recently dropped the Charge and spare bits for this
<a href="http://www.flickr.com/photos/28754076@N05/8737035752/in/photostream" target="_blank" rel="noopener noreferrer"><img src="http://farm8.staticflickr.com/7285/8737035752_389b945220_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://www.flickr.com/photos/28754076@N05/8735917447/in/photostream/" target="_blank" rel="noopener noreferrer"><img src="http://farm8.staticflickr.com/7283/8735917447_e451480c3b_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I got this to replace my Leatherman Charge Ti and Spare Bit Kit in my under seat bag on my bicycle. This fits great in my jersey back pocket. Here are the specs of the tool from where I bought it at biketiresdirect.com
The b17 Multi-Tool includes the most-used bike tools in an innovative and compact package. Magnetic driver bits lock into either of the two drivers located at the corner edge of the tool body. When not in use the driver bits are held in rubber sleeves on the tool body that fold in for a compact size and to lock the bits in place so they don't get lost.
In the center of the tool body is a chain tool with spring-loaded removal. Once removed, the chain tool features a magnetic hex that fits into the driver for a better grip and leverage. 230 grams.
Includes:
1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Hex Wrenches
T10 and T25 Torx Wrenches
Flat and Phillips Screwdrivers (Two sizes each)
#0 and #1 Spoke Wrenches
Chain Tool -
Depends on the distance I'll be riding, but mainly:
-4,5,6 mm Allen wrenches.
-Co2 inflater.
-Tube.
-Patch kit.
-Tire lever.
-Chain breaker and extra links. (Usually just on longer rides.)-Water bottle and food (usually seeds/nuts).
-Phone, credit card, ID, $20.
I took my multi tool apart to mod it awhile ago, and haven't put it back together yet.
When I get around to that, that'll replace my loose Allen wrenches and chain breaker. -
@hiljentaa said:
Depends on the distance I'll be riding, but mainly:-4,5,6 mm Allen wrenches.
-Co2 inflater.
-Tube.
-Patch kit.
-Tire lever.
-Chain breaker and extra links. (Usually just on longer rides.)-Water bottle and food (usually seeds/nuts).
-Phone, credit card, ID, $20.
I took my multi tool apart to mod it awhile ago, and haven't put it back together yet.
When I get around to that, that'll replace my loose Allen wrenches and chain breaker.Please don't forget to post pictures of you mod when you get it put back together!
-
@Zed said:
well it was a wet and cold day, lots of mud and big puddles :D here is a pic of my stuff, not including tube under my saddle and altoids tin with batteries in my backpack i forgot to get out, although was pouring down :-\ if on my road bike i just have the saddle bag with tube,tire levers and my p4,stopped here and had a chat with sparky :D

Zed, what bars are those? When I first bought my Specialized Rockhopper it had rolling bars on it. For some unknown reason I went with a tapered flatbar, might of been when getting the Girvin Flexstem. Been trying to get back into riding, did a messily 4 miles to the dentist and back home today and am not liking the flatbar at all.


What I had before as a handlebar. Am so going back to a curved bar again!

Did go with this wide cruiser seat because it had no horn. Being over-weight a horned saddle was making me black and blue between the legs. Horrible sight, didn't feel very well either.
The horned saddle is great in that it keeps your butt planted whereas the hornless cruiser seems to be throwing me onto the bars. Yeah, I know, you aren't supposed to be on the saddle much. Am seriously out of shape and need to get back into shape, so cutting corners where I can and trying to save on gas too.
What do y'all use for cycle computers? Had a cheaper XLC but lost the instructions and even the company that made it doesn't have them. Today I pulled the meter off to get trip data; distance, trip time, average speed, top speed, ect. and the stupid thing was blank! It did add to the odometer, that was all. Grr.
Used to have a horseshoe shaped Cateye back in the day, the year they came out with a solar version. Wished had gotten the solar one, but they were very expensive.
Have to get a valve core tool yet... seems most bicycle supply sections do not have them, neither does the automotive sections. Those plastic valve core tools fail. Recently replaced the inner tubes with a sealant type, and one of the valve cores was in there probably at 40 fp! Broke both plastic valve core tools that came with the tubes. After locating a metal cap version it would not budge it either!! Grabbed the sidewall of the metal core cap with my Charge TTi and got the valve core removed!!! Gawd, someone was either bored or hated cyclists that day.
Looked around at the so-called cycle tools at Wally's World, Bi-Mart, all heavy cast and over $30. Not one have a valve core tool either.
Have always partially inflated the tube, squeezed and bounced it, then popped the valve core. Repositioned for a straight stem, then inflated it up to pressure. As one time had a pinched tube and sounded like a M80 going off when I got on the bike. Valve core remover works way better than pressing the stem and waiting for the air to escape enough.
-
I just use my iPhone 5 and the Wahoo Fitness app for recording. I use Strava to post the data for viewing. When I had the iPhone 4S, I used the Wahoo Fitness bike pack. That was a case for the phone that mounted to the handle bar and a combo speed cadence sensor. I also had the spare battery pack made by Wahoo for the case. I still have the Wahoo Fitness equipment that only has some short use on it of anyone is interested in it.
I want to get the Wahoo RFLKT so I can view the data while I ride (my iPhone is in my back pocket in the jersey). I still can't pull the trigger on a $500+ Garmin 810
or $650+ for the combo pack. THat's what everyone's using now for cycling computers though I'm told. -
@stealth007s said:
I just use my iPhone 5 and the Wahoo Fitness app for recording. I use Strava to post the data for viewing. When I had the iPhone 4S, I used the Wahoo Fitness bike pack. That was a case for the phone that mounted to the handle bar and a combo speed cadence sensor. I also had the spare battery pack made by Wahoo for the case. I still have the Wahoo Fitness equipment that only has some short use on it of anyone is interested in it.I want to get the Wahoo RFLKT so I can view the data while I ride (my iPhone is in my back pocket in the jersey). I still can't pull the trigger on a $500+ Garmin 810
or $650+ for the combo pack. THat's what everyone's using now for cycling computers though I'm told.I have only seen a few cyclists with Garmins on their handle bars, but I am riding in an event next month that will have about 700 riders. I'll keep an eye out to see what people are using
I use my Galaxy S3 running Endomondo mounted in an Otterbox belt clip that is zip tied to my handlebars.
-
I just use my iPhone 5 and the Wahoo Fitness app for recording. I use Strava to post the data for viewing. When I had the iPhone 4S, I used the Wahoo Fitness bike pack. That was a case for the phone that mounted to the handle bar and a combo speed cadence sensor. I also had the spare battery pack made by Wahoo for the case. I still have the Wahoo Fitness equipment that only has some short use on it of anyone is interested in it.
I want to get the Wahoo RFLKT so I can view the data while I ride (my iPhone is in my back pocket in the jersey). I still can't pull the trigger on a $500+ Garmin 810
or $650+ for the combo pack. THat's what everyone's using now for cycling computers though I'm told.I have only seen a few cyclists with Garmins on their handle bars, but I am riding in an event next month that will have about 700 riders. I'll keep an eye out to see what people are using
I use my Galaxy S3 running Endomondo mounted in an Otterbox belt clip that is zip tied to my handlebars.
Are you going on The Great Owyhee Ride Against Hunger on Saturday, June 15th 2013?? Wanted to go but doubt will be ready in a month.
Wanted to ride at the 7th Annual Weiser River Trail Bike Ride on June 8th, but is too early for me. I would have to ride 10 miles a day to prep for that.
If I only had a recumbent, then would be way easier. Have that big computer muscle (tummy) to contend with, and weighing in at 365 pounds only helps when going downhill. :D -
@Xelkos said:
I just use my iPhone 5 and the Wahoo Fitness app for recording. I use Strava to post the data for viewing. When I had the iPhone 4S, I used the Wahoo Fitness bike pack. That was a case for the phone that mounted to the handle bar and a combo speed cadence sensor. I also had the spare battery pack made by Wahoo for the case. I still have the Wahoo Fitness equipment that only has some short use on it of anyone is interested in it.
I want to get the Wahoo RFLKT so I can view the data while I ride (my iPhone is in my back pocket in the jersey). I still can't pull the trigger on a $500+ Garmin 810
or $650+ for the combo pack. THat's what everyone's using now for cycling computers though I'm told.I have only seen a few cyclists with Garmins on their handle bars, but I am riding in an event next month that will have about 700 riders. I'll keep an eye out to see what people are using
I use my Galaxy S3 running Endomondo mounted in an Otterbox belt clip that is zip tied to my handlebars.
Are you going on The Great Owyhee Ride Against Hunger on Saturday, June 15th 2013?? Wanted to go but doubt will be ready in a month.
Wanted to ride at the 7th Annual Weiser River Trail Bike Ride on June 8th, but is too early for me. I would have to ride 10 miles a day to prep for that.
If I only had a recumbent, then would be way easier. Have that big computer muscle (tummy) to contend with, and weighing in at 365 pounds only helps when going downhill. :DThose both look like fun events, but since they are about 2000 miles from my home, I'll have to find some rides that are a little closer.
I'm riding the 62 mile course in the Tour de Taylor http://www.tourdetaylor.org/ on June 15 and I plan to ride a century in the fall, but haven't chosen an event yet. One possibility is the Apple Cider Century http://www.applecidercentury.com/ I've ridden the ACC a few times, but that was back in mid 1990's.
Congratulations on getting back on the bike Xelkos.
-
It's rough staying motivated on a bicycle, but had a lot of encouragement today. Saw a geezer at 65+ on a carbon fiber racer, and seen his training bike today clipped on his Yakima rack. He was a skinny ol' fart.
Saw another fellow in his late 40's, with spare tires on the sides, be bopping it down the sidewalk. So didn't feel too old really. Then got home and neighbor looked at me quirky like, asked if I was losing weight. Said only been on the bike a couple of times but didn't think I was losing weight...

Also in need of new tires, so going to put some standard Trek ones on when they come into the shop, and told the fella I wanted curved handlebars. Them flat things are not comfortable anymore.
And Joe looked at my saddle and said it was for a different style of bike and that's what is throwing me into the bar. Either get a cruiser or try a different saddle. He's got a saddle coming in that has cut-out in the middle, and is hoping the horn is not nearly as wide. It comes with a 60 day warranty on the saddle, and Joe said he won't quibble about refunding the money if it doesn't suit me.So now it is a waiting game on the parts. Hope the Rockhopper has enough cable for the curved bars, otherwise that's going to re-cabling. :ahhh
Did order a Sigma BC 1009 Bicycle Speedometer off of Amazon a bit ago. The wireless one looked great, but chose the wired version. Had read a few comments on Amazon that the higher powered LED bike lights will interfere with wireless transmitters. Not that I could afford any of these lights, I cannot foretell the future either. So going wired, and will find some silicone sealant to reinforce the wire on the sensor.

Where can one find plastic/nylon spiral wire harnesses at? The ones I have are old, but are great for protecting wires on the cycle computers. Cateye was good at supplying spiral wiring harnesses back in the day. Did not like what Cateye had for computers now, 'cept maybe the Endura.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
