I did it!!!
-
regarding the missing bushings,
what would happen if you peened the pins like you would on an alox for the missing bushings and then glued on cellidor?
do the bushings serve another function besides being the spot where the cellidor scales anchor too?
-
@WiSAKfan said:
regarding the missing bushings,what would happen if you peened the pins like you would on an alox for the missing bushings and then glued on cellidor?
do the bushings serve another function besides being the spot where the cellidor scales anchor too?
Ya in a pinch you could just probably use a small nut or something and glue it to the scale. If you peened without something the rivet would dome and glue wouldnt stick too well to that I would think.. but a small nut i bet would work.
-
regarding the missing bushings,
what would happen if you peened the pins like you would on an alox for the missing bushings and then glued on cellidor?
do the bushings serve another function besides being the spot where the cellidor scales anchor too?
Ya in a pinch you could just probably use a small nut or something and glue it to the scale. If you peened without something the rivet would dome and glue wouldnt stick too well to that I would think.. but a small nut i bet would work.
great quick response from a fella that would certainly know!
-
I did it too.. thanks for the kick in the pants to get this finished Heinz.

-
Once I can get some plus scales and possibly some more bushings, I'll fix mine.
I'm thinking now that I'm probably just going to redo it altogether. Use the old scissors that were in my old Explorer as well as the old blade.
I was thinking it might be possible to make bushing out of brass rod, by finding some with the same outer diameter as the bushings, and then drilling a 2.5 mm diameter whole in the center. Might be a little tricky, but with the right equipment I don't see why it couldn't be done.
-
The little lip or ridge on the collar would be a pain to put on the brass rod. That's what holds the scale on.
-
if you could rig up a mount that would hold pieces of the rod vertically i could see doing it.
it would be harder if you cut it to thickness first

-
How many bushings you need? I have a ton I'll send you for nothing but a stamp :)
-
@tattoosteve99 said:
How many bushings you need? I have a ton I'll send you for nothing but a stamp :)Thanks Steve! PM incoming.
-
Would a shipment to germany be possible, too? ;)
-
Any 58mm pin stock you could get rid of? I might have talked Heinz into doing a 58mm mod for me. ;)

I can send you a Money Order if needed.
-
the pin stock on the 58mm is 1/16" which is much easier to find. give your local hardware and hobby store a call and see if you can just grab locally
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
