The Commander (LM Super Charge Mod)
-
To tell the truth, I'm not nor have I been a very big fan of Leatherman for a while. I see genius mods like yours being proven in design yet no interest from them in improving their product - and this is nothing new. Some of this stuff is obvious, yet LM keeps on doing its own thing and if you don't like it - here's the finger to ya.
That aside, you've done some spectacular work there, very impressive, and it would be a shame if some company didn't hire your creativity.
-
@sawman said:
To tell the truth, I'm not nor have I been a very big fan of Leatherman for a while. I see genius mods like yours being proven in design yet no interest from them in improving their product - and this is nothing new. Some of this stuff is obvious, yet LM keeps on doing its own thing and if you don't like it - here's the finger to ya.That aside, you've done some spectacular work there, very impressive, and it would be a shame if some company didn't hire your creativity.
Thanks for the vote of confidence, but I am sure its not as fancy as it seems. Skinth is a pretty big dream for me that has come true. Even if I can't be at Leatherman, I am very happy and pleased to know that 1000's of Leathermans are being carried in Skinths today!
@tattoosteve99 said:
Well they missed out! They would have had a great engineer and their sales would have went way up. No matter we have you and they can go........you can fill in the blank :DI got MTO and MTO has me. This place has been awesome for motivation and ideas, I hope I can inspire those who haven't melted the Loctite in the pivots of their tools :D
-
More bushcraft developments.
I had been toying with the idea of adding a ferro rod somewhere on an MT and the Commander is a good place to start.
I milled out a 1/8" slot on the inside of the scale, the scissors offering a lot of space. I took some aluminum rod I had as a stand in, still waiting on the ferro rod. The Alu rod is 2.2mm but the ferro is supposed to be 1/8".
Other websites have listed their 2" long ferro rod as 2nm diameter. In any case, both should fit.


The biggest problem I had was finding a striker ON the MT that was removable. Since adding the Blade Exchanger, this problem is a thing of the past.

This mod is by no means a replacement for a proper ferro rod or another kind fire starter but its kind of a proof of concept and last ditch.
-
whats going to keep the ferro rod in place?
-
File/Metal Saw/Diamond file/Pry Bar
I've always wanted to try this. I took the removable diamond file/file and shortened it, sharpened the tip and added a small nail slot.
Now, before you say...that join will never be strong enough to pry stuff...the operative idea is that the file/pry bar is REMOVABLE. This is sorta like a souped up mini flat widgey bar.


Here it is closed in the Commander.


And this is for Gnarly...a Commander Skinth! A L-Shield with a couple of mods, a back pocket that is divided into two for the saw and file. I like this and might be a good feature for the XL-Shield (designed for the Surge).



Along for the ride is a Thrunite Ti light, space pen, bit card and the two blades.

-
I asked about a wave file prybar awhile back, the general consensus was that it was the wrong kind of steel, maybe the surge file is different, regardless, great mod.

I want to try the ferro thing on my wave, where did you get the ferro rod? -
@redbaron said:
I asked about a wave file prybar awhile back, the general consensus was that it was the wrong kind of steel, maybe the surge file is different, regardless, great mod.
I want to try the ferro thing on my wave, where did you get the ferro rod?I unno. I had a heck of a time grinding it, it'll do for a quick prying.
I got the ferro rod from eBay a set of 1/8" and 3/16" (for the Surge mod I am planning for)
-
Tweezers and Toothpick/Knife grips
After failing twice at manually milling this piece from a couple of small scraps of titanium, I gave in a went digital. I've toyed with adding a plate on the sides for extra grip. I had a mildly successful attempt when I made my own "Flair", AKA The Panache. A brass plate was added, jimping was hand filed...this will be so nice.




What you are looking at are two plates that will be epoxied on the flat surfaces on the Commander, what you don't know is that they are getting printed in alumide and black plastic (for now at least) from Shapeways.

These plates serve a much more Swiss purpose than just aesthetics. Not only are they grips and jimping for the use of the outside tools, the two hollow cavities will be hold a set of Vic Classic Tweezers and Toothpick!

Here's a visual reference of how the T&T will sit.

The hole and gap in the bottom will accomodate the rivet on the side of the Commander, this also serves as a pressure point to hold the tweezer and toothpick. Here's a really bad rendering...the T&T will pull towards the knife pivots.

I ordered a set of black plastic and a set of alumide...over all $20 and should be here by the new year. Once I know they fit, I'll order the polished stainless. I'll need to some hand finishing, I didn't want to fire up SolidWorks...most because this is an extruded shape, but I also didn't want to get into 3D modelling hell.
-
"I didn't want to fire up SolidWorks...most because this is an extruded shape, but I also didn't want to get into 3D modelling hell."
clearly you haven't used autocad in 3D, now THATS hell -
One question though Eric, where/ when can I get one (or two or three.....)?


-
Vic Pen.
This one I've been chasing with a stick for a while now...I prefer the Wave over the Charge because it is slimmer and more compact, but there is certainly a lot more possibilities and hidden mini cavities on the TTI.
Taking a 91mm Vic Pen...meant for the scale of a Vic SAK plus, I saw an opportunity for it to be slotted into one of the blade chambers.
Here you can see it inside the very back of the blade slot.

Measuring it up and chucking it on up, a small notch was milled into the back edge scale, this was only two operations, fairly simple.
(look on the left side of the top scale in the photo) You'll also notice the other milled slot, that's for the ferro rod already described in a previous post.
Here you can see how tight I'll be, I ended up putting it in the SE slot for a couple of reasons. 1. I didn't want the edge on my PE to be scratched from the pen being drawn/replaced. 2. The SE snub nose tip is less dangerous in case the pen pushed it out accidentally 3. The SE has 20x more sharp edges to wear down than the PE one.

The pen was a little loose inside the newly found slot so I glued some .02mm styrene I had leftover from a vacuum forming project. That ate up the smallest of room and it also provided a nice smooth surface for the pen to ride against.

Gluing the strip down.

A rough in fit and it looks promising!

Buttoning it up!




Again, this will never replace a real pen...but if I need to grab one thing to leave the house and defend my honor with...it might be this tool!
-
@redbaron said:
"I didn't want to fire up SolidWorks...most because this is an extruded shape, but I also didn't want to get into 3D modelling hell."
clearly you haven't used autocad in 3D, now THATS hellOh yah..I know of AC3d and it's terribleness. I hope to offer the T&T if the first run fits well, I am also thinking I may add a bottom to the t and t slots so they don't ride along the actual tool itself, but it'll make them thicker.
-
"I didn't want to fire up SolidWorks...most because this is an extruded shape, but I also didn't want to get into 3D modelling hell."
clearly you haven't used autocad in 3D, now THATS hellOh yah..I know of AC3d and it's terribleness. I hope to offer the T&T if the first run fits well, I am also thinking I may add a bottom to the t and t slots so they don't ride along the actual tool itself, but it'll make them thicker.
Thats cool, I'd like one if you could mill them from Ti?
-
"I didn't want to fire up SolidWorks...most because this is an extruded shape, but I also didn't want to get into 3D modelling hell."
clearly you haven't used autocad in 3D, now THATS hellOh yah..I know of AC3d and it's terribleness. I hope to offer the T&T if the first run fits well, I am also thinking I may add a bottom to the t and t slots so they don't ride along the actual tool itself, but it'll make them thicker.
Thats cool, I'd like one if you could mill them from Ti?
It would be made from stainless. It'll look Ti, it's stainless powder infused with bronze.
-
I have some carbon fiber laying around. I may give it a try :) I have access to a mill tomorrow for a few, might be a good chance to mill the slots. Thanks for the great idea :)
-
@tattoosteve99 said:
I have some carbon fiber laying around. I may give it a try :) I have access to a mill tomorrow for a few, might be a good chance to mill the slots. Thanks for the great idea :)I used the profile of the blades for the top. Be sure to mill enough material off the off so when the Pliers are open they will clamp down all the way.
-
Today's bumming around the house doing random stuff.

-
Blast! The minimal wall thickness is 1mm, I'll need to redesign It and shoot it back to shape ways.
No need to fear!
-
Wow that is awesome yet another masterpiece
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login