Gerber Balance Review
-
@50ft-trad said:
I've found my micrometer
They measure 4.76mm A/F (across flats) which is 3/16" - an odd size indeed

**I'm still expecting a call from Gerber though .... **


-
So the Balance cannot take 1/4" bits at all? That is a little disappointing.

-
It is ... but it is still a very nice pocket tool. Even if it turns out that it's limited to the four driver styles which come with the tool I'll still be happy with it. I would of course be even happier if it had more versatility and I wasn't worried about how to get replacement bits if/when the supplied ones wear or get damaged though.
I feel a bit guilty for cocking up the review a bit, but overall it's still worth grabbing, particularly here in the UK or anywhere else where tool choices for "normal" EDC (without good reason) can be limited.
I also checked through their advertising blurb last night, and at no point have I seen Gerber advertise this as having "replacable" bits. The hopes we pinned on the tool having 1/4" bits appears to be purely our own doing as a community, not us being misled by Gerber (which has disarmed me from tearing them a new arse crack as I had intended
)I'll tweak the wording on the review at some point and PM you a revised version for overwriting the OP if that's OK mate

EDIT: PM sent

-
OK, the original review has been updated to cover the new information about the bit sizes.

-
Thanks for that Gareth
Apologies to all for getting it a bit squiffy before 
Tom, don't worry mate - you're still going to love it

-
-
@50ft-trad said:
@50ft-trad said:
great review mate.

Thanks Gareth,
So what colour are you getting?


none yet, I'm totally brassic right now.

.. or simply not inebriated enough last time you went online browsing >:D When you have trouble holding your head up and start inadvertently typing with your face, that's a good time to keep away from Amazon etc ... or at least that's the conclusion I came to after buying another CS4

I'm very glad I took the plunge on the Balance though. It's one I had been talking myself out of for a while. Getting this and selling some other stuff was for sure the right move - though I didn't necessarily do those two in the right order

Well it seems I'm not quite as brassic as I though, that and Amazon have one for £34 right now.
I'm not even drunk, not unless you can get pissed on coffee....can you? -
@50ft-trad said:
@50ft-trad said:
[quote author=Gareth link=topic=40506.msg648227#msg648227 date=1351121000]
great review mate.
Thanks Gareth,
So what colour are you getting?


none yet, I'm totally brassic right now.

.. or simply not inebriated enough last time you went online browsing >:D When you have trouble holding your head up and start inadvertently typing with your face, that's a good time to keep away from Amazon etc ... or at least that's the conclusion I came to after buying another CS4

I'm very glad I took the plunge on the Balance though. It's one I had been talking myself out of for a while. Getting this and selling some other stuff was for sure the right move - though I didn't necessarily do those two in the right order

Well it seems I'm not quite as brassic as I though, that and Amazon have one for £34 right now.
I'm not even drunk, not unless you can get pissed on coffee....can you?
[/quote]Too much caffeine ... too much caffeine ... can't sit still ... I know ... I'll make coffee ... big mistake ... still cant sit still ... quick buy something ... amazon ... ebay ... amazon ... gerber ... get it ... get it ...

Good score mate, £4 is a great price - about £10 less than it cost me, and mine was the best deal around at the time

So which colour did you get mate? Mine is now starting to show some base metal. The coating is proving to be about as wear resistant as the Dime (so, not very) although it's going to have plenty of character within not many months which is always good

-
At the price I was paying I didn't have a choice, so it's the grey for me too.

-
And it's here.
First impressions are good and tie in with Al's review. 
-
Nice one mate
I'd certainly be interested in your thoughts after you've had chance to play with it a bit and given it a few days carry and use. 
I'm led to believe there's another Gerber fan signed up for one of these, and looking forward to their thoughts on it too

-
@50ft-trad said:
I'm led to believe there's another Gerber fan signed up for one of these, and looking forward to their thoughts on it too
Someone else is getting a Balance?
It'll be interesting to see what they think of it. Oh, wait...... 
-

I think that just leaves Mercury and Kirky to pull their fingers out and go get one and then all the enlightened Gerberites on here will be good to go

Have we missed anyone that needs a
?

-
Just going to add some of my pictures on the tail of Al's review.




-
@50ft-trad said:

I think that just leaves Mercury and Kirky to pull their fingers out and go get one and then all the enlightened Gerberites on here will be good to go

Have we missed anyone that needs a
?

:ahhh :ahhh :ahhh
GET THEE BEHIND ME SATAN!

In fairness the thing thats been holding me back is the bit drivers!At work I'm very philips dependant,and I nee drivers with a fair reach as most of the screws I encounter are recessed(hence I NEEDED to back up my superduper Wave2 with my PST/SAK
)
.The Bit drivers here look very much like that of the Cybertool,which,for me suffers the same problem as the Wave.The other question is would it fit my Skinth?
All a bit moot as this months budget has already been overspent

-
Sod off! People have tried catching me out like that before ::)

@kirk13 said:
In fairness the thing thats been holding me back is the bit drivers!At work I'm very philips dependant,and I nee drivers with a fair reach as most of the screws I encounter are recessed(hence I NEEDED to back up my superduper Wave2 with my PST/SAK
)
.The Bit drivers here look very much like that of the Cybertool,which,for me suffers the same problem as the Wave.What size Phillips, John? I'd have thought the Balance and Cybertool would be OK with many #2 screws, but maybe not with #1 or smaller
The holder on the Balance is slightly larger than that on a Cybertool diameter wise, so if the CT doesn't work, the Balance won't be any better. The mini Phillips driver on the Fit is quite good in that respect though 
Away from work though in an urban environment I do find it to be a nice capable legal tool

-
Some further thoughts after carrying it for a little while.
First up is the pocket carrying; much better than I thought it might be. I was worried when I first got it that, as it is bigger than my normal Juice CS2, I would find it to big for my taste. I happy to say I was wrong and that Grant and Al were right, the rounded shape really does help it sit well.
I'm not wild about the blade shape TBH, nothing wrong with it, but it just doesn't do it for me. I'm also not wild about the soft-ish backspring and I'm never a fan of serrated blade sections.
While I would love to of seen a bit driver that would have taken a bigger selection of bits, I actually don't have any real complaints with what it there. The bit heads are all well formed and fit what they are made for. Also the long holders help tackle the issue with other sliding pliers designs; namely that the body of the MT often gets in the way when using the drivers on a screw in a restricted position. No such issues with these holders.

The scissors don't seem quite as well finished as the ones I am used to on the MP600/400 range, but they actually work very well.
Finally the pliers themselves. I'm much more used to being able to flick the pliers on my other Gerbers, but there is nothing to really complain about with the sliding mechanism. Very easy to open one handed and only fractionally harder to close.
I've only just this minute remembered that this tool even has tweezers so can honestly say I've not had any issues with them. TBH, they're tweezers; what can go wrong with them?

All-in-all a very nice package.

-
Aight, I'm in too.
This was actually a Christmas present from a salesman I deal with at work, just got it today! 

Now unlike Al, I didn't go off doing something crazy like dismantling doors to try it out - I took apart one of the paint shakers at the store.
Initial impression? Oh, I like it.
The driver length is nice, and they didn't feel like they were going to close on me. The pliers, while small, work nicely, and the scissors are just fine. The blade is decent, again though a soft backspring, but not irritatingly so. Like mentioned above, I wish the bits were a standard size,
but that's certainly not a deal-breaker with me. For a light-duty tool it suits my needs just fine. That coating isn't going to last all that long in my pocket, but that just gives it character.
The shape makes it very comfortable for pocket carry as well. I've had a Juice, and I just didn't get along with it. The Balance, though, is going to be seeing a lot of service. 
-
Al,JD,Gareth,your a bunch of smurfs,you all really are

I couldn't take the peer pressure,I've just ordered one

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login