Affordable Easy Sharpening System
-
Smith's makes some good products. The Pocket Pal Sharpener is one that's inexpensive and easy to use. The only problem is that if the edge is really bad, the knife may need to be done on a stone or something like that.

-
The Spyderco (http://www.amazon.com/Spyderco-Tri-Angle-Sharpmaker/dp/B004HIZKHE) sharpens just about every 'cept the cut-hook like on a Leatherman Charge.

Amazon (2nd link) has a much better price.
-
Lansky makes this Pocket Crock Stick that is probably the smallest (1/8") for cut hooks like those on Leatherman tools & knives.

On time there was a tapered ceramic sharpening stone that became rather popular, but I have as yet found one for sale anywhere. All the round ceramic sharpeners that i have found are either way too big (1/4") or too small (1/8").
It looked a lot like this one, but not sure if they really have these DMT Diafold Ceramic Karambit Sharpener in stock - since most everyone else is out of stock on them.

-
I have a setup that looks exactly like the Spyderco but it is made by Cutco. I used to sale/service Cutco and it was part of the service kit. It works great for blades that just need touched up. If there is a nick or ding it takes forever to take it out on that setup. I need something that can be more aggressive. Anyone ever used the Lansky system? http://lansky.com/index.php/products/dlx-5-stone-system/
How about the Edge Pro Apex, very spendy but highly recommended on YouTube. http://www.edgeproinc.com/Apex-Model-Edge-Pro-System-c3/ I have a feeling this really works but its really more than I want to spend.
By the way the other suggestions seem to be easy but lack the capability I need/want.
-
I use the Lansky system all the time, highly recommend it. It's very easy to use and after a while you'll be able to sharpen pretty quickly with it.
-
I also have one, I really like the Lansky system as I’ve said before it takes all the skill out of the task which suits me :tu:
I bought the three stone set then added the coarse diamond stone (a sharpy and a bright light helps ;) )As we are talking about sharpening I thought I would add a link to this thread to a few freehand sharpening videos that people might find useful
Sharpening Videos
I also use mouse pad and sandpaper to sharpen my knives, and after I'm done with the sandpaper I just finish with a few strokes on leather strop with green c...
Multitool.Org Forum (multitool.ninja)
:cheers:
-
It depends on what you mean by best.
I have the Lansky too (also try a search too; there are a few threads discussing various systems).
I also sharpen freehand certain blades, like with recurves.
Exduct sells a system similar to the Lansky/Smiths that got some good reviews in Britishblades forum, I think.
Here is a link:
http://www.exduct.com/Special-Limited-Products/SP931D-Precision-Sharpener.html -
I use a Lansky at home. It took a bit of practice to get used to it, but now I can get a blade shaving sharp very easily.
At work I keep one of the small Smith's pocket sharpeners or the Lansky version of it in my locker for quick touch ups. Whatever system you get, make sure that you play around with it a bit with a beater blade until you're comfortable with it. -
+1 for the Sharpmaker

-
I use the Sharpmaker . I am however competent with freehand , just that having a set up Sharp Maker is just so handy . I'm not fond of the Lansky , I have one , but it's gathering dust .
I have a DMT folding med/fine diamond stone in my tool box , and have strops all over the place .
I used to own an Edge Pro , just found it too time consuming . And they are rather spendy !
Chris
-
I recently got the Work Sharp "Guided Field Sharpener" and I have to say it has done a great jog at getting a nice sharp edge every time I have used it.
http://www.worksharptools.com/manual-sharpeners/guided-field-sharpener/flypage.pbv.tabs.tpl.html
-
I have to admit that I was too lazy to read all the responses, but I can tell you that I have the Spyderco sharpmaker, a lansky turnbox, a smiths pocket stone, a smiths double sided diamond stone, and several coarse/fine tool sharpening stones along with a ten or so cheap "V" shaped keychain sharpeners that are only good for the occasional kitchen knife.
The best for the money in my mind is the Lansky turnbox. It's about $11 and if your knife is plain edged then it will serve you well and there are additional sticks you can buy with various levels of abrasion. If you have a serrated blade, the Spydie sharpmaker is your best bet, and also has expansion sticks. With careful sharpening that system is tops, but it will set you back nearly $80.
-
I do use the Smith's Pocket Sharpener for the tapered diamond file on my Leatherman Charge TTi's Cut Hook. Followed by the Lansky Pocket Crock Stick's ceramic stone to put a fine cutting edge on.
Was dinking around this evening and noticed that after cutting a guide through the plastic wall, following the angle given by the inner rod holder, was able to extend the ceramic stick through to the outer side.

Pressing down on the inside > gives a decent angle to drag the cut hook horizontally. Then on the other side. Am happily to say it gives a nice clean paper cutting edge. :)


-
I was the same as OP; thought freehand sharpening was an arcane skill that I didn't have the time to learn. Bought a spyderco sharpmaker, which is great for taking a dull edge to super sharp, but without the diamond stones it's a lot of effort for completely blunt knives, so I bought the Fallkniven DC4 as well; the diamond side really eats metal and lets you turn something with no edge at all into a blade.
Between those two, I'm completely happy.
-
@Yak-er said:
I have a setup that looks exactly like the Spyderco but it is made by Cutco. I used to sale/service Cutco and it was part of the service kit. It works great for blades that just need touched up. If there is a nick or ding it takes forever to take it out on that setup. I need something that can be more aggressive. Anyone ever used the Lansky system? http://lansky.com/index.php/products/dlx-5-stone-system/How about the Edge Pro Apex, very spendy but highly recommended on YouTube. http://www.edgeproinc.com/Apex-Model-Edge-Pro-System-c3/ I have a feeling this really works but its really more than I want to spend.
By the way the other suggestions seem to be easy but lack the capability I need/want.
I have the Lansky in the link above, and I like it. I fully echo Jamie_M, sparky415 and jerseydevil's comments on it.
-
I am pretty convinced that I'll buy a Lansky. With it plus my Cutco Ed Reed sharpener (same idea as sharpmaker) and a whole box of wet stones I should be able to put decent edges on about everything or total screw them up :D.
-
Work sharp guided belt system. 110% awesome. All I use any more.
The Ash Mobile Voom Voom
-
If you know how to freehand , or are committed to learning , a Spyderco Doublestuff , a leather strop of the same size + a leather bootlace loaded with abrasive will do pretty much all . ( the abrasive loaded bootlace being for serrateds ) . Just get your practice in on lower end Vic. or Henkel paring knives ( cast plastic handles ) .
Chris
-
I went with the lansky system after asking advice in here. It's very simple to use and there's plenty of vids on YouTube if in doubt. I'd recommend it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login