Penetrating oils
-
I got this off another forum I'm a member on and thought someone here might find it interesting.
Information on Penetrating Oils
Penetrating Oils - Machinist's Workshop Mag recently published some information on various penetrating oils. The magazine reports they tested penetrates for break out torque on rusted nuts. They are below, as forwarded by an ex-student and professional machinist. They arranged a subjective test of all the popular penetrates with the control being the torque required to remove the nut from a "scientifically rusted" environment. *Penetrating oils ........... Average torque load to loosen* No Oil used .................. 516 pounds WD-40 ..................... ....238 pounds PB Blaster ................... 214 pounds Liquid Wrench ...............127 pounds Kano Kroil .................... 106 pounds ATF* - Acetone mix..........53 pounds The ATF-Acetone mix is a "mix-your-own-brew" -- 50 - 50 automatic transmission fluid and acetone. Note this "home brew" released bolts better than any commercial product in this one particular test. Our local machinist group mixed up a batch and we all now use it with equally good results. Note also that "Liquid Wrench" is almost as good as "Kroil" for about 20% of the price. -
Hmm, I've always used PB blaster, turns out damn thing isn't much better than WD40. Guess I'll try ATF next time.
-
never heard of Kano Kroil....hmmm
-
I'll make sure I remember the ATF-acetone mix. Looks to be the one to really do the job.

-
I've always used 50-50 ATF and Diesel with good results, but will have to try acetone for the next batch.
-
The Poms (UKers) seem to like a product called Plus Gas.
-
@gregozedobe said:
The Poms (UKers) seem to like a product called Plus Gas.We do?!

Never heard of it myself! What is it?
-
The absolute best knife/tool oil on the market...

Coming soon...
Def
-
Ah, yes.. Def's special juice.....
:DI bet it will be expensive :o
-
I will most DEF get that stuff when it releases



-
i bet it is salt water
-
Just so you all know, Uncle Def's Premium Tool Oil is not a joke. It is a REAL product that will be available soon. We've been working on it behind the scenes for over a year now. :D
Def
Sent from my MB860 using Tapatalk 2
-
Seriously, I will buy some when it's released


-
id try it too

-
KDX
Interesting thread
Chrissy,
You can buy Plus Gas as an aerosol or a metal squirty tin (like 3in1 oil tin) in car-parts shops or online
Some people recommend diesel fuel to do the same job ;) -
:ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh
Pacu changed his avatar again............
No fish this time?¿?

-
i have beagles too
:D
-
The Poms (UKers) seem to like a product called Plus Gas.
We do?!

Never heard of it myself! What is it?
It is a penetrating or dismantling fluid, especially recommended for rusted on or corroded nuts, bolts or studs. Leave it to work its magic for 24 hours or so, then try to loosen the stuck nut or bolt.
http://www.lawson-his.co.uk/eac-plus-gas-400ml-dismantling-lubricant--p30700
-
For rusted bolts that just wont give, heres a trick my Dad taught me. Heat up the rusted bolt, and then apply what rusted it. Yep thats right, plain ole water. Cost=$0 usually. Works for me everytime, and theres not much clean up ;)
-
I will have to remember that one Steveo.
The Ash Mobile Voom Voom
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login










