My Leatherman post #2
-
@50ft-trad said:
A question: Are victorinox plier's heads cast or forged??
(Forging could also be done with a machine, by the way, not with a blacksmith using an anvil)Neither would be my guess, for sure not cast. I would guess they are stamped out of sheet stainless like every other part they make, then riveted together.
-
If the sheet is pressed with rollers can they be considered "forged", at least strength wise? (like Sandvic mora steel)
-
@dks said:
If the sheet is pressed with rollers can they be considered "forged", at least strength wise? (like Sandvic mora steel)Forging and rolling are two methods of hot working and for the purposes of this discussion have similar effects on the grain structure of the metal. If they are cut from a rolled material, they will have a better grain structure than cast, but not necessarily as good as a closed die forging
-
..so the conclusion is that Victorinox pliers should be a lot tougher than LM ones! (..and I use an ST300 >:( ) :D
-
If the ST300 are cast, and the Vic's are forged or via stock removal from rolled plate that's certainly leaning in the Vic's favour - depends on materials used and heat treatments and such too though
-
Where is nutnfancy with a destruction test when you need him... :D
-
I would agree. If the Vic pliers are forged, they are definitely a stronger pliers design.
BTW, I know Leathermans are cast because my brother was a chemical engineer at a precision casting compony (NOT Precision Cast Parts, btw) when they were manufacturing pliers for Leatherman. In fact, he was the project engineer when the plant was moved to Mexico for casting (Leathermans stuff for one, but other things too).
-
From the surface markings (and price, remember how much wire EDM cut multitaskers cost even though they are made in China), I'd say Vic pliers are cast as well.
-
My understanding is that almost all MT pliers are cast, with Multitasker being the exception.
-
Didn't realize that LM plier heads were cast. I'm surprised any premium tool would be cast, as it is such a terrible production method. Sort of a bummer, but oh well.
-
Leatherman plier heads may be cast, but they have been performing in their intended function for more than 25 years. There are plenty of cases of them breaking, but they are not dedicated tools and should not be classed in the same league. Multitools are a compromise between function and convenience. Like others have said, if we had a forged head tool we would not be able to afford it!
Nate's tool broke doing something that any Multitool user would have done, and I agree with him that it shouldn't have. That's what the warranty is for. Let's not start bashing cast plier heads, because all the good MT's have them.
-
So just how many pics have we seen of broken Swisstool/Spirit broken plier heads ?
-
@Mr. Whippy said:
So just how many pics have we seen of broken Swisstool/Spirit broken plier heads ?
It's hard to really grip down on them. They're too slippery.

Boom tish :D

Seriously I think Victorinox suffers less broken pliers then Leatherman , I think I've only ever seen one photo of a broken Swisstool and the guy had used it while welding

-
@Mr. Whippy said:
So just how many pics have we seen of broken Swisstool/Spirit broken plier heads ?
It's hard to really grip down on them. They're too slippery.

Boom tish :D

Seriously I think Victorinox suffers less broken pliers then Leatherman , I think I've only ever seen one photo of a broken Swisstool and the guy had used it while welding

I've only seen a few broken swisstool (big or spirit) plier heads on the interwebz. I have a feeling, however, that it may have more to do with the sheer number of LMs out there when compared to the swisstools than any inherent design or manufacturing differences.
This is coming from a die-hard Vic fan too :o
My be worth bringing up this thread.
-
The number of SAKs pliers tools will/may depend on which continent you are on. Whilst in the American continent there may be more LM tools I do not think that this will be the case worldwide, at least regarding the larger pliers tool, competing with the spirit and the swisstool...
Here a Micra costs 50Euro remember. LM tools are very rare/unknown and considered more of an expensive gadget or fashion accessory. I have not (I think) ever seen anybody carry a LM tool, that was not gifted by me.Any statistics anyone??
-
@dks said:
The number of SAKs pliers tools will/may depend on which continent you are on. Whilst in the American continent there may be more LM tools I do not think that this will be the case worldwide, at least regarding the larger pliers tool, competing with the spirit and the swisstool...
Here a Micra costs 50Euro remember. LM tools are very rare/unknown and considered more of an expensive gadget or fashion accessory. I have not (I think) ever seen anybody carry a LM tool, that was not gifted by me.Any statistics anyone??
50 Euro!? :o I know LM's are expensive, but I believe we get them for about 30, here...
-
50, last time I checked which was a year ago... Only one dealer. The bigger ones (Charge etc) are 100, 150...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

