Wave vs Charge
-
Ok, I have a confession to make. Yesterday, installing windows it wasn't actually a Leatherman Charge that I used. Actually, I used my Leatherman Wave.
What I found is this:
The Wave is much thinner for pocket carry. Surprisingly so. Yes, the handles are a little less comfortable, but by no means a deal breaker.
I also miss the guthook, but honestly, that can be pretty easily worked around too.
For me, the Wave is essentially as good as a Charge TTi or AL and I wouldn't pay more than $10 more for the premium versions.
The Charge ALX, however, does give the user an extra bit driver, which I find hugely helpful. And of course you get the guthook too, which I like as well.
So my final breakdown comes as such:
IF you feel you'd benefit from having 2 bit drivers on board, the Charge ALX is definitely worth the premium price.
If not, I don't see the Charge TTi or AL offering a lot over the standard Wave. (And you give up a bit of thinness for the premium scales.)
-
I preferred the thinness of the wave as well, but I do like the s30v blade on the TTi better. So I would be happiest with a standard wave body, with the tools from TTi. The cast Ti 'scales' do nothing for the tool or me.
-
@Syph007 said:
I preferred the thinness of the wave as well, but I do like the s30v blade on the TTi better. So I would be happiest with a standard wave body, with the tools from TTi. The cast Ti 'scales' do nothing for the tool or me.You know it's interesting.
When I'm doing a lot of repetitive cutting, especially with messy materials, I tend to use a utility knife and then change them out as needed. I end up using the PE on the multitool only for very specific, one off, cutting jobs.
-
This Is exactly why I made the commander and the black tide, the wave is a much thinner carry!!
-
The titanium charges and indeed the ALX don't hold any interest for me. The 420 blade on the Wave is perfectly adequate, and even with a dedicted folder I'll have a similar steel. I don't tend to chase the high end stainlesses due to chipping and being harder to sharpen - MUCH harder if they have chipped. The gut hook and cap crimper do not interest me either.
I have one Charge and one only - I got the AL - but on a whim .... because it's my name ::) It is the best looking of the range in my opinion, but the Wave does feel better in hand and in pocket as it's not quite as chunky
Otherwise I think the Wave is an excellent tool, and unless you absolutely must have a second driver, gut hook or cap crimpers ... the Charges are merely an extravagant ego booster. Despite my frequent rants against LM in terms of quality and being seriously overhyped, I really do think everyone should at some point own a Wave (Along with a Spirit and a MP400/600). It really is a very good tool in it's own right, without the (unnecessary IMO) embelishments of the Charges :)
-
I think I would prefer the wave just because I'd feel better about beating on it. The charges are too pretty

-
I've had both and much preferred the Charge (Ti).
Fit and finish was way better than the Wave I had.
-
I' m right there with most folks here. I had a used Wave, and loved it. I only traded it away because I have a very VERY slight preference for the Spirit X, and didn't need 2 full size tools. If money looks better in the future, getting another Wave is on my list.
I wouldn't bother with the Charge series. My level of use would never justify the cost.
Everything about the Wave seemed at just the right level of function; good blades, great saw, awesome file, very good bit holder, allowing lots of versatility, and still retaining a dedicated flathead driver. It was bigger than what I normally EDC (same as the Spirit), but not a monster.
-
Carried a Wave for many years and saw the refinements on the Charge TTi as appealing. It is more of like the Cadillac of the series, and some folks I asked went to the aluminum scales more for the lesser price. ~ Leatherman had a Friends & Family sale, and picked up my TTi off of eBay for around $75.
Holding the former Wave in one hand, and my Charge TTi in the other, I can feel the difference right off.
The TTi scales are more comfortable, and feel almost rubberized. Over the past 2 years of ownership I never had the TTo slip out of my hands. The TTi scales also feel warmer in the cold, and never got too hot to handle when left out in the blazing desert heat.One thing I do not like about the TTi is that stupid cap crimper. Never understood why Leatherman put it there, as those in demolitions I would think would have a much more sophisticated tool. Unless it was meant for miners?

Was excited about the cut hook, and it is great for snipping off wire ties, cutting through fruit net bags, sand bags, ripping through plastic wrapped items/water containers, cutting cord, and slicing through leather & linoleum.
Sharpening the surface to a razor sharpness on the other hand is annoying, and wished that blade was at least 154CM to hold its edge better. Leatherman <u>should</u> <u>have</u> equipped the tool with a tapered ceramic sharpener or stone made exclusively for the tool - or at the very least offered a way to sharpen it.
One could put a corner cutting hook into the blade if they can match the surface to a triangular sharpener, like the shape of the OHT.The S30V steel blade I absolutely adore. have only sharpened mine 4 times now since ownership, and the Wave's main blade would of been about every 2 months. Tend to use the serrated blade more, or used my Skeletool for fast slicing job or kiwi slicing. Skeletool recently went walkabout.
Have been considering swapping the pliers out for the Wave's as I would much rather have a full pliers jaw for bending & straightening purposes, and throw the cap crimper onto the Wave.
One of my bigger complaints is no awl on the Charge series. Leatherman seems to have a fetish with flathead drivers.
Comes down to the scales and the better steel on the main blade.
International or Range Rover? Leatherman gave us that choice. -
@Millhouse said:
I've had both and much preferred the Charge (Ti).Fit and finish was way better than the Wave I had.
Does your Charge hang up when you go to close it?
I have the Ti and original Wave. Both are in my BOB for EDC and rarely get use. When I cycle, the CHarge is in my tube bag under the seat with a full bit kit. Kinda wish my Wave had a bit exchanger but I'm not getting a new one just for that

-
Yep I go for my Wave over my ALX because I prefer the Waves slimness

-
@50ft-trad said:
The titanium charges and indeed the ALX don't hold any interest for me. The 420 blade on the Wave is perfectly adequate, and even with a dedicted folder I'll have a similar steel. I don't tend to chase the high end stainlesses due to chipping and being harder to sharpen - MUCH harder if they have chipped. The gut hook and cap crimper do not interest me either.I have one Charge and one only - I got the AL - but on a whim .... because it's my name ::) It is the best looking of the range in my opinion, but the Wave does feel better in hand and in pocket as it's not quite as chunky
Otherwise I think the Wave is an excellent tool, and unless you absolutely must have a second driver, gut hook or cap crimpers ... the Charges are merely an extravagant ego booster. Despite my frequent rants against LM in terms of quality and being seriously overhyped, I really do think everyone should at some point own a Wave (Along with a Spirit and a MP400/600/700/800). It really is a very good tool in it's own right, without the (unnecessary IMO) embelishments of the Charges :)
I just added a couple more Al
and although i love my Ti i still feel the wave is great value for money and a very god MT that everyone should try at some point on the MY journey 
-
@Xelkos said:
One thing I do not like about the TTi is that stupid cap crimper. Never understood why Leatherman put it there, as those in demolitions I would think would have a much more sophisticated tool. Unless it was meant for miners?
One of my bigger complaints is no awl on the Charge series. Leatherman seems to have a fetish with flat head drivers.
The first thing I did when i got my wave was swapping the pliers head with the wave. I'm really pleased.
Take a look here http://edcforums.com/threads/my-modded-lm-charge-tti.98901/. I will post the whole project on this forum as soon as I am done.
I recently grinded the large, fixed, flat head screwdriver into an awl, and it works really well. If you like to keep the flat head, but have a wave for donating parts (you talked about swapping the pliers head) you could always get rid of another tool, like the small bit holder or the scissors, and grind the flat head from the wave into an awl.
-
I've switched from the Wave to the Charge AL for three main reasons:
-
The added thickness of the Charge fits better in my hand. Doesn't pocket carry as comfortably, but I use a sheath 99% of the time anyway.
-
I know it's cliché, but the blade does hold an edge better, especially when it's slightly dull. I've found that the 154 will stay "sharp enough to still cut" much longer than the 420.
-
But the biggest reason is the outside blade fasteners. After using the blade on the Wave a lot, I've found that as it wears in at the pivot, and starts to move easier, that the pivot bolts will eventually start to turn with the blade and "spin" to an area that is not as worn. It would end up to where one time I opened the blade it came out easily, and then the next time it pushed out hard like a new tool. I've even got them back from warranty like this and had to return them. Started to make a point of specifically noting the issue on the warranty forms to make sure that it was addressed.

-
-
- But the biggest reason is the outside blade fasteners. After using the blade on the Wave a lot, I've found that as it wears in at the pivot, and starts to move easier, that the pivot bolts will eventually start to turn with the blade and "spin" to an area that is not as worn. It would end up to where one time I opened the blade it came out easily, and then the next time it pushed out hard like a new tool. I've even got them back from warranty like this and had to return them. Started to make a point of specifically noting the issue on the warranty forms to make sure that it was addressed.

Dude, I thought that was just how they worked. So happy that there is hope. When open and closing my Wave's pliers one side would start to stick ~30 degrees from open and less so when closing. End result: Blade fasteners would spin one way and not the other causing my serrated to scrap against the scales sometimes and not others also it was looser sometimes than others.
-
@Xelkos said:
One of my bigger complaints is no awl on the Charge series. Leatherman seems to have a fetish with flathead drivers.I agree. I don't understand why they seem to avoid placing an awl in the Wave/Charge series as opposed to that flathead. I actually filed the flathead down to an awl, or as close as I could get on my own. I like it better than having that flathead, especially since there is already a flathead on the bit driver.
-
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?
-
@scorpion008 said:
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?For me, I am not finding it useful really. I got it along with the extender, but since I pocket carry and don't like to use the sheath, I don't end up carrying any of that extra stuff with me.
-
I actually have all 3 (Wave, Charge AL and TTi) and I like them all. The Wave is in my car as a backup. I do like it's thinner profile in comparison, but I still like the looks of the Charges better. My multitools don't get put through heavy use, so I prefer to carry one of the Charges, but if I expect some heavier or dirtier use, I prefer the Wave. I think of that as my beater version :D
-
@scorpion008 said:
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?I'm in agreement with Monrogue, even when I carried them in my sheath I didn't use them much.
On the other hand, I always make sure I have the kit when traveling, it comes in quite handy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login