What Did You Use Your Multitool For Today?
-
Doctor? No, that's when you stick the diamond file into the Surge and scratch harder. You'll solve the itching sooner or later.
-
Used the scissors on my juice s2 to cut a straw shorter for my kids drinks.
-
Anyone ever cut cheese with their pocket blade? That seems to be mainly what it's for in Europe. I generally don't let any of my tools touch my food.
-
We have been known to cut food with pocket knives...

Traditionally in Europe people use single blade knives. So they cannot have a “clean” blade for food and one for “dirty” work.
Some people will cut everything with their knife, then give it a quick wipe and that’s it..

Others will use the knife to cut food, then wash it and dry it. That is what I usually do.
Of course it depends on what facilities are available where you use the knife.
The important thing is to remember not to use the knife for food, after you have used it to scrape mud off your shoes etc.
Another problem that may arise is from the oil used on knives or on their pivots; foodsafe or not and whether it makes any difference in the end, safetywise. (Huuuuge discussion in the knife forums..)
I use oil just on the pivots and not on the blades so I do not care.Then you have to consider if your blade is SS or not and whether you like the colouring or taste left by non SS blades on your food. I cut a lemon and then an onion with an old 1095 knife and the onion was black at the cut.
I have also used multitool blades for cutting food and clean pliers for moving food on the grill (LM Flair
) -
I use my SAK blade for cutting food all the time, and I've never had any issues. I usually wipe it down after every use anyway, like I do all my blades.
-
oh yeah, my multis and folders get used on food all the time. I just keep em clean, only lubricate with mineral oil, and got straight from cutting open a mystery box from taiwan to cutting my apple without at least a quick rinse between.
-
Yeah, back on the farm we used to castrate a bull with the same knife with which we cut an apple for lunch 10 minutes later. Years later, I seem to have acquired an aversion to using my pocket knife blade for cutting my food. I suppose the microbiology class I took in university ruined it for me. :(
-
I think I might stick to a different blade for that particular purpose

However, I use whatever EDC type knife I have on me for most things including food, and just keep it clean, sharp and oiled :)
-
Used my Leatherman Rebar to tighten screws on a loose door handle.
Link below to YouTube page.
-
@dks said:
We have been known to cut food with pocket knives...
Traditionally in Europe people use single blade knives. So they cannot have a “clean” blade for food and one for “dirty” work.
Some people will cut everything with their knife, then give it a quick wipe and that’s it..

Others will use the knife to cut food, then wash it and dry it. That is what I usually do.
Of course it depends on what facilities are available where you use the knife.
The important thing is to remember not to use the knife for food, after you have used it to scrape mud off your shoes etc.
Another problem that may arise is from the oil used on knives or on their pivots; foodsafe or not and whether it makes any difference in the end, safetywise. (Huuuuge discussion in the knife forums..)
I use oil just on the pivots and not on the blades so I do not care.Then you have to consider if your blade is SS or not and whether you like the colouring or taste left by non SS blades on your food. I cut a lemon and then an onion with an old 1095 knife and the onion was black at the cut.
I have also used multitool blades for cutting food and clean pliers for moving food on the grill (LM Flair
)What about using olive oil?
I have used that for years now on all my stuff to include as a honing oil 
-
Olive oil is fine as long as it is not kept for too long. As a honing oil it is fine, since you clean it afterwards.
For any long term lubrication use it is not good as it begins to smell bad going rancid and congeals, attracting dust. It is also not good with extreme heat or cold.
It can be used as an emergency lubricant if needed, though ;) ...
Note that the olive oil here is pretty strong, that is not very filtered and purified, having a really good taste.
Maybe the really purified, industrial made one is better for oiling.
-
I think the upside to using a petroleum-based oil might be that its more resistant to food-borne pathogens than vegetable or animal oils. I dunno, I use Jigaloo on my tools.
-
I now use 3 in 1 for lube needs when I'm at home (I'm not going to put it in my EDC pack due to the mess risk) but I'll stick with the EVOO when I need it ICOE and for honing.

-
I used the pliers of my Charge TTi to loosen the bolt that was holding the spare donut tire in the trunk of my car. I had to rub that one in the wife's face because she doesn't see much use for my multis and SAKs ::) If I hadn't had that on me, I would have had to go back inside to hunt for something else to use.
-
I use the hook on my Charge to roll up the rim on my Tim Horton's cups.
-
Took apart more computers. It's becoming the running theme for my Spirit.
I did notice last night the blade isn't quite up to Vic's usual sharpness standards. It is now :)
-
@thebullfrog said:
Took apart more computers. It's becoming the running theme for my Spirit.I did notice last night the blade isn't quite up to Vic's usual sharpness standards. It is now :)
Do you have the Spirit X or the regular? Just wondering if you had the regular, how you sharpened the blade.
-
X. I used to have an S, and I would use the corners of my Sharpmaker rods to sharpen the butter blade. Didn't work great but was a serviceable solution.
-
@thebullfrog said:
X. I used to have an S, and I would use the corners of my Sharpmaker rods to sharpen the butter blade. Didn't work great but was a serviceable solution.I wish I had been able to get an S model. I have the regular model with the butter blade. I bought the Smith's pocket sharpener that has the tapered diamond grit rod, but that looks like it would be a little rough. I had based my choice around having scissors, but that was before I got bitten by the SAK bug. Now I have scissors covered by one of those, and don't have to have them on my multitool. I prefer the scissors on an SAK over the Spirit's anyway, plus I can just pull out the SAK for a quick snip if needed instead of pulling out a multitool for that quick task.
-
X. I used to have an S, and I would use the corners of my Sharpmaker rods to sharpen the butter blade. Didn't work great but was a serviceable solution.
I wish I had been able to get an S model. I have the regular model with the butter blade. I bought the Smith's pocket sharpener that has the tapered diamond grit rod, but that looks like it would be a little rough. I had based my choice around having scissors, but that was before I got bitten by the SAK bug. Now I have scissors covered by one of those, and don't have to have them on my multitool. I prefer the scissors on an SAK over the Spirit's anyway, plus I can just pull out the SAK for a quick snip if needed instead of pulling out a multitool for that quick task.
91mm SAK scissors really are the best option for EDC scissors.

Don't fret though, even though they have a small bite, the Spirit scissors are pretty good too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login