Best SAK Ever!!!
-
In my experience, the end of the can opener works better for turning phillips screws than the backspring phillips, unless the head of the screw is in tight quarters. The backspring phillips is too polished and rounded to grab many screws, and has a very short reach due to the T-handle setup.
This is true, even when I used to carry a Tinker I used the can opener tip unless it was a recessed screw. The Vic can opener is a pretty darn good Phillips screwdriver too.
-
In my experience, the end of the can opener works better for turning phillips screws than the backspring phillips, unless the head of the screw is in tight quarters. The backspring phillips is too polished and rounded to grab many screws, and has a very short reach due to the T-handle setup.
This is true, even when I used to carry a Tinker I used the can opener tip unless it was a recessed screw. The Vic can opener is a pretty darn good Phillips screwdriver too.
I can't say I have ever tried that. I will do now though. :)
-
@ducktapehero said:
I don't EDC my Spirit, but since I rarely go out it's usually near me. I keep in in a centrally located place in my house so I'm always close to it. And if I DO carry it I don't carry my Farmer.Ooops, my bad. I mis-remembered you mentioning that you EDC your Spirit.
@ducktapehero said:
But since getting my Farmer I have yet to come across a Phillips screw that couldn't be handled by the Farmer. I use the saw more often than I need to go find a different Phillips screwdriver so for me the Farmer is a better choice.Glad to hear the Farmer works for you.
However, a Hiker might well fit your needs even better as it offers both woodsaw AND dedicated Phillips driver.
.
-
I don't need saw, day in day out, but I find it comforting to know it there :)
-
@micky d said:
I don't need saw, day in day out, but I find it comforting to know it there :)Hear, hear!
. It works well on materials other than wood too, such as PVC and sheet rock. -
Ooops, my bad. I mis-remembered you mentioning that you EDC your Spirit.
I used too but then it got relegated to shelf duty when I got my Farmer. It's being modded with a pocket clip right now so when I get it back it may become my EDC again. Who knows? My EDC varies quite a bit. :P
However, a Hiker might well fit your needs even better as it offers both woodsaw AND dedicated Phillips driver.
LOL Actually I'm thinking of getting a Fieldmaster with PLUS scales, that way I can quit carrying my Classic on my keychain. But if I go that route I'm sure I'll still go back and forth between what I carry. I have the attention span of a 3 year old on speed.
-
I've lost count of the thing's I've used that saw for, and it'd never needed sharpening!
-
I would say the Swisschamp but it is a too big sometimes . Its got to be a Climber paired with a Swisstool
Not alot comes close .Dunc
-
Maybe we should have a poll ???
-
A Spartan you say

-
They do one that comes without the key ring as well. :D
-
@NutSAK said:
In your opinion, how is it "better"? The Farmer's woodsaw is longer than the Spirit's. IMO, that is "better".I don't own either Spirit or Farmer, but have briefly handled them in a store.
So, perhaps I am mis-remembering...
But, doesn't the Spirit woodsaw lock open? And, doesn't the Farmer not have a locking woodsaw?
I didn't directly compare saw lengths between Spirit and Farmer, but surely there isn't that much of a difference...
@ringzero said:
A Farmer can't turn phillips head screws?In my experience, the end of the can opener works better for turning phillips screws than the backspring phillips, unless the head of the screw is in tight quarters. The backspring phillips is too polished and rounded to grab many screws, and has a very short reach due to the T-handle setup.
Perhaps I should have been more explicit in my example: "holding a nut with the Spirit's pliers while turning a RECESSED bolt using the Tinker's Phillips driver"
I've used a SAK can opener to turn Phillips screws when the SAK I was using lacked a dedicated Phillips. Mostly it worked out OK, but I also recall buggering up some Phillips screws when turning them with the can opener.
So, in general I'd prefer to use the SAK dedicated Phillips driver rather than the can opener. Plus, I encounter lots of recessed Phillips that the can opener won't even touch.
.
-
The saw on the Spirit does indeed lock open, but I've never had a Farmer saw blade fold on me, so I think it's a moot point, regarding the lock (or lack there off), the greater length of the Farmer however is hard to argue with :)
-
@ringzero said:
So, in general I'd prefer to use the SAK dedicated Phillips driver rather than the can opener. Plus, I encounter lots of recessed Phillips that the can opener won't even touch.You should try a model with the in-line phillips driver if you haven't. It's the best of both worlds. It fits more heads, gets into tight areas, and has great reach.
I've buggered-up many more phillips screws with that over-polished backspring phillips than anything else. Out of the 60 SAKs I own, I now only have one that has the backspring phillips, and that's just because I can't find a SAK that has the same implements as a Deluxe Tinker w/a corkscrew instead of the phillips.
-
I agree, the inline one is far better. :) I just wish it didn't have to come on the same layer as a magnifyer. :(
-
Yep the inline is far better, until it closes on your fingers :o
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login