Different Swisstool plier heads , the truth
-
@MTguy said:
I just got a swisstool rs for christmas and the plier head looks just like the 2005 one but there is no vic logo on the plier head at all. Also the victorinox logo on the handle is different than all the ones i've seen pictures of. It has the logo above the word "victorinox" instead of infront of it. I'll try and get some pics.About the file - is it the newer aggressive one (similar to the Spirit) or the older non-aggressive one that most of us don't like too much?
-
have been chasing this plier head with no shield for some time and no luck, but today I landed a swisstool with a sheepsfoot serrated blade. I have never seen that before. Anyone else see it?
so now I have swisstools with
serrated
sheepfoot serrated
rescue serrated
and butter serrated on the spirit. -
@scrappy said:
have been chasing this plier head with no shield for some time and no luck, but today I landed a swisstool with a sheepsfoot serrated blade. I have never seen that before. Anyone else see it?
so now I have swisstools with
serrated
sheepfoot serrated
rescue serrated
and butter serrated on the spirit.You had to know someone was going to say this, right?

:D
-
for you Gareth
Left to right
serrated sheepfoot
serrated rescue
standard serrated
serrated butter

-
That's the first time I've seen a Swisstool with a serrated sheepsfoot , I wonder if it has a new model number or if its just an update to the standard model.
-
Cheers Scrappy.

-
At GPKnives is a photo of the latest Swisstool X with no stamp on the plier head, the shield above "Victorinox" on BOTH sides of the tool, and no red paint.
http://www.gpknives.com/victorinoxswisstoolx.html
Note the file teeth go right up to the tip - is this the newer coarser file?
-
It appears there may be a possibility the Swisstool is going back to the slimmer plier head.
http://www.pensandleather...ctorinox-swisstool-x.aspx
Here is a link to a Swisstool X with:
-
New handles stamped with small shield ABOVE the word "Victorinox" rather than in front of the word "Victorinox".
-
Older slimmer profile plier head - slimmer with less metal around the center pivot. However, it does not have a shield stamped on it nor the word "Victorinox" stamped on it like previous older slimmer versions.
You will need to select the top right picture to see this (There are about 7 pictures of the Swisstool so pick the one on the top row , right end.).
I have not seen this combo before.
-
-
Any idea why my Swiss Tool has no Victorinox logo on the pliers? The Vic logo is on the ruler side with 'Victorinox' but not logo on the pliers?
-
The shield emblem is omitted on the latest plier heads - so you have the latest version - this is a good version because you have the more aggressive file.
You probably don't have the red paint on the handles either - another good thing IMHO since there is no paint to scratch.
-
Are we certain there is a plier version with the shield missing entirely? ??? Because here is the latest SwissTool I've got, fresh from Amazon with the sheepsfoot-style serrated knife. (thanks again Terry!!) One side of the pliers has a shield cast into it, while the other side is completely blank.


No red paint on either side of the tool of course.
-
There has been some discussion on this forum that the recent swisstools have no shield on the plier. I own a tool that is a year old and sure enough, no shield on the plier. I just bought a new tool and it has the shield. So, I contacted victorinox and asked them about it. They replied that the Swisstool should have a shield on the plier.
So I wonder, is it possible some models don't have the shield because the plier was built from two halves without the shield when it should have been built with one half plier that has the shield?
-
My Spirit has no shield on the plier head
-
Here is a link to a new Swisstool with no emblem on the plier head but more importantly, a SKINNIER plier head with the weaker left-hand pivot pin design as shown by the jaw crease on the right when the tool is in vertical position with plier head UP.
Now will someone please explain why Victorinox is going backwards in their design?
-
The plier head is confusing. I understood the change in pivot based on forces and it made sense. Why would they revert that? Maybe they found a huge stockpile of the old kind they misplaced? lol
-
I don't think they reverted back. That is pic from a retailer. I don't think there are any tools shipping like that.
I Bought multiple swisstools this year and none of them are reverted back to the old design
I have a couple spirits without the shield. Beats me what they are doing at vic with the pliers???
-
That ebay dealer picture looks genuine because the handles definitely look like the latest version:
- Smaller font "Victorinox" stamp
- Shield emblem directly above the "Victorinox" rather than in front
- No red paint.
-
@carl said:
That ebay dealer picture looks genuine because the handles definitely look like the latest version:- Smaller font "Victorinox" stamp
- Shield emblem directly above the "Victorinox" rather than in front
- No red paint.
Carl, your right. It is not a fake. I am sure the picture is genuine as you point out. But it is not a picture of the current model. It is a stock picture that distributors and dealers can use. The actual item may vary from the stock picture.
Here are the reasons I know this.- I was a dealer selling victorinox tools many years ago through their largest distributor in the USA. That picture looks just like the stock pictures we used when I was a dealer.
- I no longer sell or have access to victorinox multitools but I like them and that is why I have purchased 5 swisstools within the last year from retailers. They all have the wider plier.
- I spoke with a dealer on eBay who I have used in the past. He says the current model from vic has the wider plier.
- looking at the picture in your link, the seller has two pictures for the same listing. Note the handles are different in the two pictures so the pictures must be of two different tools. Same model perhaps, but different variations. My guess is both are stock pictures and neither are pictures taken by the retailer.
I am not certain what to think about the plier shield... I emailed victorinox and they told me the current model has the shield. I didnt ask about the spirit though.
-
Scrappy - thank you for your input. I always appreciate info from a dealer or ex-dealer who has that perspective which most of us do not.
And you are right about the second picture with all the tools showing are of a different individual tool.
I agree with you that dealers do indeed use various images taken from the Victorinox website and other sources, not the actual picture of the actual sale item.
However, those "stock" images always show either:
- The side that has the red painted handle or...
- The other side that doesn't have red paint but does have "Victorinox" stamped with a large shield emblem IN FRONT of and in-line with "Victorinox". See link below:
There have been no exceptions to this as far as I know - at least until now.
Recently, however, we know Victorinox changed their handle markings by:
- Deleting the red paint
- Making both the "Victorinox" stamp (letter font) smaller and shield emblem smaller
- Now the smaller shield is stamped ABOVE the smaller "Victorinox" rather than in front of "Victorinox" as before.
These new changes do indeed show up on the latest photo on ebay (see link below) and other sites - thus implying these photos are different from the previous photos and are of the newest version of the tool.
It seems implausible to assume the recent ebay picture (see link above) to be that of the older tool with the skinnier plier head - an older skinnier plier head (circa 1997-1999) matched up with the NEWEST stamped handle markings from 2013? This doesn't make sense to me - unless someone photoshopped an older skinnier plier head to a new set of handles. Not only that but, the older skinnier plier heads all had markings of some sort - either "Victorinox" or the shield emblem, both of which are missing in the recent ebay photo. See link below:
I also suspect most dealers may not be aware of the minute changes that come along occasionally - either because they are generally not made aware of simple minor cosmetic changes by the company or because they themselves (the dealers) still have older stock (i.e. larger plier head) without the changes and so have nothing newer to compare with.
I suspect the dealer you spoke with still has the previous version - with previous larger plier head and handles with newest markings. See link below:
http://www.ebay.com/itm/Victorinox-Swiss-Army-Knife-SWISSTOOL-CS-Plus-Multi-Tool-Tools-Leather-53946-/121020538081?pt=Collectible_Knives&hash=item1c2d62dce1I have had the experience of being a customer who had to inform a dealer of certain details regarding a particular product which, although they were selling the product, were not aware of some detail - probably a nitpicky detail at that :)
If a skinnier plier head is indeed coming down the pipeline, they may not hit all dealers around the world for a year or more.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login