Different Swisstool plier heads , the truth
-
At GPKnives is a photo of the latest Swisstool X with no stamp on the plier head, the shield above "Victorinox" on BOTH sides of the tool, and no red paint.
http://www.gpknives.com/victorinoxswisstoolx.html
Note the file teeth go right up to the tip - is this the newer coarser file?
-
It appears there may be a possibility the Swisstool is going back to the slimmer plier head.
http://www.pensandleather...ctorinox-swisstool-x.aspx
Here is a link to a Swisstool X with:
-
New handles stamped with small shield ABOVE the word "Victorinox" rather than in front of the word "Victorinox".
-
Older slimmer profile plier head - slimmer with less metal around the center pivot. However, it does not have a shield stamped on it nor the word "Victorinox" stamped on it like previous older slimmer versions.
You will need to select the top right picture to see this (There are about 7 pictures of the Swisstool so pick the one on the top row , right end.).
I have not seen this combo before.
-
-
Any idea why my Swiss Tool has no Victorinox logo on the pliers? The Vic logo is on the ruler side with 'Victorinox' but not logo on the pliers?
-
The shield emblem is omitted on the latest plier heads - so you have the latest version - this is a good version because you have the more aggressive file.
You probably don't have the red paint on the handles either - another good thing IMHO since there is no paint to scratch.
-
Are we certain there is a plier version with the shield missing entirely? ??? Because here is the latest SwissTool I've got, fresh from Amazon with the sheepsfoot-style serrated knife. (thanks again Terry!!) One side of the pliers has a shield cast into it, while the other side is completely blank.


No red paint on either side of the tool of course.
-
There has been some discussion on this forum that the recent swisstools have no shield on the plier. I own a tool that is a year old and sure enough, no shield on the plier. I just bought a new tool and it has the shield. So, I contacted victorinox and asked them about it. They replied that the Swisstool should have a shield on the plier.
So I wonder, is it possible some models don't have the shield because the plier was built from two halves without the shield when it should have been built with one half plier that has the shield?
-
My Spirit has no shield on the plier head
-
Here is a link to a new Swisstool with no emblem on the plier head but more importantly, a SKINNIER plier head with the weaker left-hand pivot pin design as shown by the jaw crease on the right when the tool is in vertical position with plier head UP.
Now will someone please explain why Victorinox is going backwards in their design?
-
The plier head is confusing. I understood the change in pivot based on forces and it made sense. Why would they revert that? Maybe they found a huge stockpile of the old kind they misplaced? lol
-
I don't think they reverted back. That is pic from a retailer. I don't think there are any tools shipping like that.
I Bought multiple swisstools this year and none of them are reverted back to the old design
I have a couple spirits without the shield. Beats me what they are doing at vic with the pliers???
-
That ebay dealer picture looks genuine because the handles definitely look like the latest version:
- Smaller font "Victorinox" stamp
- Shield emblem directly above the "Victorinox" rather than in front
- No red paint.
-
@carl said:
That ebay dealer picture looks genuine because the handles definitely look like the latest version:- Smaller font "Victorinox" stamp
- Shield emblem directly above the "Victorinox" rather than in front
- No red paint.
Carl, your right. It is not a fake. I am sure the picture is genuine as you point out. But it is not a picture of the current model. It is a stock picture that distributors and dealers can use. The actual item may vary from the stock picture.
Here are the reasons I know this.- I was a dealer selling victorinox tools many years ago through their largest distributor in the USA. That picture looks just like the stock pictures we used when I was a dealer.
- I no longer sell or have access to victorinox multitools but I like them and that is why I have purchased 5 swisstools within the last year from retailers. They all have the wider plier.
- I spoke with a dealer on eBay who I have used in the past. He says the current model from vic has the wider plier.
- looking at the picture in your link, the seller has two pictures for the same listing. Note the handles are different in the two pictures so the pictures must be of two different tools. Same model perhaps, but different variations. My guess is both are stock pictures and neither are pictures taken by the retailer.
I am not certain what to think about the plier shield... I emailed victorinox and they told me the current model has the shield. I didnt ask about the spirit though.
-
Scrappy - thank you for your input. I always appreciate info from a dealer or ex-dealer who has that perspective which most of us do not.
And you are right about the second picture with all the tools showing are of a different individual tool.
I agree with you that dealers do indeed use various images taken from the Victorinox website and other sources, not the actual picture of the actual sale item.
However, those "stock" images always show either:
- The side that has the red painted handle or...
- The other side that doesn't have red paint but does have "Victorinox" stamped with a large shield emblem IN FRONT of and in-line with "Victorinox". See link below:
There have been no exceptions to this as far as I know - at least until now.
Recently, however, we know Victorinox changed their handle markings by:
- Deleting the red paint
- Making both the "Victorinox" stamp (letter font) smaller and shield emblem smaller
- Now the smaller shield is stamped ABOVE the smaller "Victorinox" rather than in front of "Victorinox" as before.
These new changes do indeed show up on the latest photo on ebay (see link below) and other sites - thus implying these photos are different from the previous photos and are of the newest version of the tool.
It seems implausible to assume the recent ebay picture (see link above) to be that of the older tool with the skinnier plier head - an older skinnier plier head (circa 1997-1999) matched up with the NEWEST stamped handle markings from 2013? This doesn't make sense to me - unless someone photoshopped an older skinnier plier head to a new set of handles. Not only that but, the older skinnier plier heads all had markings of some sort - either "Victorinox" or the shield emblem, both of which are missing in the recent ebay photo. See link below:
I also suspect most dealers may not be aware of the minute changes that come along occasionally - either because they are generally not made aware of simple minor cosmetic changes by the company or because they themselves (the dealers) still have older stock (i.e. larger plier head) without the changes and so have nothing newer to compare with.
I suspect the dealer you spoke with still has the previous version - with previous larger plier head and handles with newest markings. See link below:
http://www.ebay.com/itm/Victorinox-Swiss-Army-Knife-SWISSTOOL-CS-Plus-Multi-Tool-Tools-Leather-53946-/121020538081?pt=Collectible_Knives&hash=item1c2d62dce1I have had the experience of being a customer who had to inform a dealer of certain details regarding a particular product which, although they were selling the product, were not aware of some detail - probably a nitpicky detail at that :)
If a skinnier plier head is indeed coming down the pipeline, they may not hit all dealers around the world for a year or more.
-
I can't help much with the Swisstools as I havn't bought one in a while but here is a Vic photo of the three changes they done to the Spirit , old intermediate and new. The versions without the shield on the pliers and the Vic shield infront of the victorinox word on the handle ( like mine ) is the intermediate version. Maybe they are doing something similar with the Swisstool.

-
Thanks Dunc. That is interesting to see. My spirits look like 1 and 3.
I wouldn't be surprised if they are doing something similar with the Swisstool. I have one with no shield.Carl, I will be suprised if they switch back to the old plier that is weaker, but time will tell. And as you mentioned earlier it does open wider, that could be their motive.
I am sure someone here will spot if it did happen and we will here about it sooner than later. -
It might be just a matter of using up some old stock/leftover parts.
We've seen that with Leatherman and Gerber and SOG too, where tools will be a mix of some new-style components and some old-style components, until all the old ones are used up. Still and all though, that plier head was changed back in 2005, surely all the old ones are gone by now?? ???Scrappy, I like your theory about the heads with no shields.
I'll bet it is simply a matter of the assembly person grabbing two non-shielded halves and riveting them together. But if that's the case, shouldn't we be seeing some tools with a shield on both sides too? 
-
Here is the official Victorinox Customer Service answer on this topic of plier change:
Thank you for contacting Victorinox Swiss Army.
Yes That’s the latest design
Please contact us if you need further assistance.
Sincerely,
Victorinox Swiss Army Customer Service=========== previous message(s) ===========
On 2013/01/19 01:32:16 wrote:
Swisstool - the latest pictures show the plier head slimmer and skinnier than before. Is this the latest design? Why the change?
thank you very much. -
odd?? Here is the message they sent me, which is different than what they told you. They claim the plier should have a shield and or the word victorinox.
-------- Original message --------
Subject: Victorinox Swiss Army Customer Service Inquiry
Date: Wed Jan 09 05:44:00 MST 2013
From: Victorinox Consumer Support ap3373sdvf0x.vef6uamodo5k@cs.swissarmy.com
To: terry.labrum@yahoo.comDear Terry,
Thank you for contacting Victorinox Swiss Army.
this is what I have found out for you,
Cross and Shield and or Victorinox should appear on pliers headsPlease contact us if you need further assistance.
Sincerely,
Victorinox Swiss Army Customer Service
-
I asked only about a SKINNIER plier head and if they are adopting it - I did not ask about identifying stamps or marks on plier head.
In any case, if any of us want the bigger stronger plier head, I suppose now is the time to buy the old stock while it lasts.
-
I don't mean to argue. I just don't understand the change.
I mention the stamps because the photos I have seen with the skinnier plier on the new handles have no shield. But the customer service rep told me that the tools do have shields. So it seems to me there are some inconsistancies with their photos. I can see them going back to the skinnier head possibly but not switching back to how the plier was assembled to have maximum strength in a clockwise motion. It just doesn't make sense.I have worked with their customer service before, and they have led me astray. Not willfully, they just weren't aware of the minute differences in their tools. Recently that happened when I asked about the new serrated sheepsfoot blade. I recieved a response that all swisstools (not spirits) have a pointy blade. Which is accurate, just not what I was asking about.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login