Welcome to Multitool.Org!
-
nice to meet you hoghead (any busse's with that name?)
I'm voting for the conga line/train engineer!
-
@micky d said:
So what sort of engine do you drive mate, diesel or electric ???
That's almost a trick question. They are diesel electric locomotives. A diesel engine powers an electric generator that powers the traction motors. The traction motors have a winding like a fan except they are about the size of a VW bug with the roof cut off. Each set of trucks (set of axels) has a traction motor, each engine has two traction motors.
The short answer is diesel. :D Sorry, I don't know what gets into me sometimes. :D
Sorry, I should have pointed out that I quite like my Loco's ::), I know most of the US is still predominatly Diesel, I just wondered what sort you were driving mate :)
-
@Defender said:
I studied engineering for three years in college until I found out it had nothing to do with trains.... :ahhhThat's an impressive list you have going there- watch yourself as this place causes them to multiply! :D
Def
I'd like it if they would multiply especially if it could be done without having to pay for them. I suppose the doctor would charge more for the delivery fees than it would cost just to buy them.
-
I love trains too- the last train trip I took, the engine broke down in the middle of nowhere and they couldn't troubleshoot it on the spot, so another engine had to come out, hook up and pull us to the next station, where we got yet another engine to finish the trip. A six hour ride ended up taking almost 14 all told, and I was about the only one who was happy as a clam!
Def
-
There definaltly is something very relaxing about train journeys, plus obviously knowing that there's all that power pulling you effortlessly is very cool too :D
-
I like watching the scenery....
And the power is pretty sweet too!
Def
-
@Defender said:
I like watching the scenery....And the power is pretty sweet too!
Def
Apart from cycling it's the only way I get around these day's, although the prices are a little scary, it cost me £9 to do about a 40 miles journey last week, still cheaper than going by car, but hardly cheap either :-\
-
micky d
Sorry if I came across as rude. I just have a warped sence of humor.
The short answer is all of them. The long answer is:
I've run all but 2 types of diesel engines that have been used in the US. There were 2 models of the really old/early engines that I've never seen. One of them was a switch engine and I don't remember what the other one was. I wouldn't know that except I saw a program on the History channel about it and that's when I realized that I had run all but 2.
I've been on the railroad since 1977. As a matter of fact I've probably run almost every engine that the Chicago & NorthWestern and the Uninion Pacific own. We don't have engines assigned to us. The engines/trains are run through terminals with only a crew change. For the past two years I've been on a job that hostles engines (moves them around & switch out the ones we want) and air tests trains to get them ready for the road crews. Before that I mostly worked over the road.
When I started we were using GP7, GP9 and SD18 that had 1200 to 1500 horsepower up to the SD40-2 & SD45. The new engines have 4000 plus, SD70MAC etc. I'd have to look in my books to see all of the model numbers. The lowest horsepower engines that they use on road trains now are the EMD 40-2 at 3000 horsepower. The 40-2 has been the most popular engine with engineers since I've been on the railroad, but they are getting a little long in the tooth now.
I hope that made up for my smart a$$ attempt at humor. :D
-
WhichDawg,
Sorry, no Busse's. Oh so sorry. Some day maybe. It looks like my money is already spent for the next few months. I'm buying knives/tools for my grandsons.
One or maybe two are going to get this Benchmade Bali-Song Morpho
http://www.knifecenter.com/kc_new/store_detail.html?s=BM32BKAnother wants this Woodman's Pal
http://www.knifecenter.com/kc_new/store_detail.html?s=wp482Then there are multi-tools to get.

-
we'll get you one HH! I'm originally from Chicago (moved out west last year young man) and my father worked on a the railroad for a time,
I wouldn't know any details only guesses but I remember going to LaGrange to the big train repair/building place, I remember thinking how
cool it was! -
Sorry if I came across as rude. I just have a warped sence of humor.
The short answer is all of them. The long answer is:
I've run all but 2 types of diesel engines that have been used in the US. There were 2 models of the really old/early engines that I've never seen. One of them was a switch engine and I don't remember what the other one was. I wouldn't know that except I saw a program on the History channel about it and that's when I realized that I had run all but 2.
I've been on the railroad since 1977. As a matter of fact I've probably run almost every engine that the Chicago & NorthWestern and the Uninion Pacific own. We don't have engines assigned to us. The engines/trains are run through terminals with only a crew change. For the past two years I've been on a job that hostles engines (moves them around & switch out the ones we want) and air tests trains to get them ready for the road crews. Before that I mostly worked over the road.
When I started we were using GP7, GP9 and SD18 that had 1200 to 1500 horsepower up to the SD40-2 & SD45. The new engines have 4000 plus, SD70MAC etc. I'd have to look in my books to see all of the model numbers. The lowest horsepower engines that they use on road trains now are the EMD 40-2 at 3000 horsepower. The 40-2 has been the most popular engine with engineers since I've been on the railroad, but they are getting a little long in the tooth now.
I hope that made up for my smart a$$ attempt at humor. :D
No worries mate, no offence was taken (I've been married, so I'm pretty thick skinned :D), I can just never get over the shere length of the trains that you guy's get in the US and Canada, ours are less that a quater the size off yours :o
-
Greetings fellow Multitoolers! Just signed up - I'm from South Wales, UK, and am tempted by either Cybertool or Swisstool Spirit to replace the wife, as her teeth have become a bit blunt now, and she struggles to open tins, cut wire or unscrew posi-drive screws. I have a 9 month old daughter, which means my wife has lost her ability to open bottles too.
I have tried many a "piece of tat" toolage to get me by, but I need guidance before I lose all my digits and/or a limb or two...!
Cheers all

-
Welcome to the forum Towser!

both tools would be excellent, but the pliers on the Spirit may give you (her) a little more bite!
more tools in the Cybertool, more strength in the Spirit, what may I ask would be your prime uses? -
Welcome to the forum Towser! You are going to love it here!
-
Thanks for the welcome guys - I have a feelling this forum might cost me a bit when I see all the shiney stuff!
As for my needs - I'm a machine operator in a printing firm, so a good multitool will be needed, but not too big as I would carry it around most of the time even when not in work, as I like to tinker! I'd pretty much use all the tools of the spirit, but also the small drivers of a Cybertool (for the 2,000 battery changes for my daughters toys etc). Don't know whether to get Cybertool and Spirit, or the Spirit with the ratchet tool so I can use my own 6mm bits. But then again the pen and tweezers of a Cybertool would be handy too! ??? Now I can see why some of you guys have several of these things! I have found the Spirit for £38 and Cybertool 34 for £26 so not too bad for both.
Of course Mrs Towser will be told they are from the pound shop... ::)
-
We've got a rule around here Towser, and you may as well not try to fight it:
When In Doubt, Buy Both!

Heh-heh, welcome by the way! :)
-
Welcome to the forum mate, great to have another bloke from the UK here

As for what tool, we'll instead of investing in new dentures for the missus :D, I'd go for the Spirit, the cybertool is an awesome Sak, but the Spirit probably has just a bit more utility and is definatly the stronger of the two :)
-
explain utility boss, the regular Spirit has around 23 uses/tools (if you count the lanyard ring)
but even the Cybertool 29 has more uses!? I would think the Cybertool has more utility

-
@WhichDawg said:
explain utility boss, the regular Spirit has around 23 uses/tools (if you count the lanyard ring)but even the Cybertool 29 has more uses!? I would think the Cybertool has more utility

True, but to my mind the spirit has a better and more useful selection of tools :)
-
lol, I sit down corrected sir! ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login