Welcome to Multitool.Org!
-
micky d
Sorry if I came across as rude. I just have a warped sence of humor.
The short answer is all of them. The long answer is:
I've run all but 2 types of diesel engines that have been used in the US. There were 2 models of the really old/early engines that I've never seen. One of them was a switch engine and I don't remember what the other one was. I wouldn't know that except I saw a program on the History channel about it and that's when I realized that I had run all but 2.
I've been on the railroad since 1977. As a matter of fact I've probably run almost every engine that the Chicago & NorthWestern and the Uninion Pacific own. We don't have engines assigned to us. The engines/trains are run through terminals with only a crew change. For the past two years I've been on a job that hostles engines (moves them around & switch out the ones we want) and air tests trains to get them ready for the road crews. Before that I mostly worked over the road.
When I started we were using GP7, GP9 and SD18 that had 1200 to 1500 horsepower up to the SD40-2 & SD45. The new engines have 4000 plus, SD70MAC etc. I'd have to look in my books to see all of the model numbers. The lowest horsepower engines that they use on road trains now are the EMD 40-2 at 3000 horsepower. The 40-2 has been the most popular engine with engineers since I've been on the railroad, but they are getting a little long in the tooth now.
I hope that made up for my smart a$$ attempt at humor. :D
-
WhichDawg,
Sorry, no Busse's. Oh so sorry. Some day maybe. It looks like my money is already spent for the next few months. I'm buying knives/tools for my grandsons.
One or maybe two are going to get this Benchmade Bali-Song Morpho
http://www.knifecenter.com/kc_new/store_detail.html?s=BM32BKAnother wants this Woodman's Pal
http://www.knifecenter.com/kc_new/store_detail.html?s=wp482Then there are multi-tools to get.

-
we'll get you one HH! I'm originally from Chicago (moved out west last year young man) and my father worked on a the railroad for a time,
I wouldn't know any details only guesses but I remember going to LaGrange to the big train repair/building place, I remember thinking how
cool it was! -
Sorry if I came across as rude. I just have a warped sence of humor.
The short answer is all of them. The long answer is:
I've run all but 2 types of diesel engines that have been used in the US. There were 2 models of the really old/early engines that I've never seen. One of them was a switch engine and I don't remember what the other one was. I wouldn't know that except I saw a program on the History channel about it and that's when I realized that I had run all but 2.
I've been on the railroad since 1977. As a matter of fact I've probably run almost every engine that the Chicago & NorthWestern and the Uninion Pacific own. We don't have engines assigned to us. The engines/trains are run through terminals with only a crew change. For the past two years I've been on a job that hostles engines (moves them around & switch out the ones we want) and air tests trains to get them ready for the road crews. Before that I mostly worked over the road.
When I started we were using GP7, GP9 and SD18 that had 1200 to 1500 horsepower up to the SD40-2 & SD45. The new engines have 4000 plus, SD70MAC etc. I'd have to look in my books to see all of the model numbers. The lowest horsepower engines that they use on road trains now are the EMD 40-2 at 3000 horsepower. The 40-2 has been the most popular engine with engineers since I've been on the railroad, but they are getting a little long in the tooth now.
I hope that made up for my smart a$$ attempt at humor. :D
No worries mate, no offence was taken (I've been married, so I'm pretty thick skinned :D), I can just never get over the shere length of the trains that you guy's get in the US and Canada, ours are less that a quater the size off yours :o
-
Greetings fellow Multitoolers! Just signed up - I'm from South Wales, UK, and am tempted by either Cybertool or Swisstool Spirit to replace the wife, as her teeth have become a bit blunt now, and she struggles to open tins, cut wire or unscrew posi-drive screws. I have a 9 month old daughter, which means my wife has lost her ability to open bottles too.
I have tried many a "piece of tat" toolage to get me by, but I need guidance before I lose all my digits and/or a limb or two...!
Cheers all

-
Welcome to the forum Towser!

both tools would be excellent, but the pliers on the Spirit may give you (her) a little more bite!
more tools in the Cybertool, more strength in the Spirit, what may I ask would be your prime uses? -
Welcome to the forum Towser! You are going to love it here!
-
Thanks for the welcome guys - I have a feelling this forum might cost me a bit when I see all the shiney stuff!
As for my needs - I'm a machine operator in a printing firm, so a good multitool will be needed, but not too big as I would carry it around most of the time even when not in work, as I like to tinker! I'd pretty much use all the tools of the spirit, but also the small drivers of a Cybertool (for the 2,000 battery changes for my daughters toys etc). Don't know whether to get Cybertool and Spirit, or the Spirit with the ratchet tool so I can use my own 6mm bits. But then again the pen and tweezers of a Cybertool would be handy too! ??? Now I can see why some of you guys have several of these things! I have found the Spirit for £38 and Cybertool 34 for £26 so not too bad for both.
Of course Mrs Towser will be told they are from the pound shop... ::)
-
We've got a rule around here Towser, and you may as well not try to fight it:
When In Doubt, Buy Both!

Heh-heh, welcome by the way! :)
-
Welcome to the forum mate, great to have another bloke from the UK here

As for what tool, we'll instead of investing in new dentures for the missus :D, I'd go for the Spirit, the cybertool is an awesome Sak, but the Spirit probably has just a bit more utility and is definatly the stronger of the two :)
-
explain utility boss, the regular Spirit has around 23 uses/tools (if you count the lanyard ring)
but even the Cybertool 29 has more uses!? I would think the Cybertool has more utility

-
@WhichDawg said:
explain utility boss, the regular Spirit has around 23 uses/tools (if you count the lanyard ring)but even the Cybertool 29 has more uses!? I would think the Cybertool has more utility

True, but to my mind the spirit has a better and more useful selection of tools :)
-
lol, I sit down corrected sir! ;)
-
Thanks for your input guys - much apprieciated! But I think J-Sews hit the nail on the head with "When In Doubt, Buy Both!
" (Any SAK with a hammer by the way?
). I guess a Spirit with a Cybertool 34 would be the most practical array of toolage - carry both in work and just the CT34 round the house.Thanks Guys - you put my mind at rest.
And cost me £70........... :D (But the cost of tinkering and destruction is priceless right?)
-
That's the way to go Towser! Once you learn their pro's and cons, especially weights and feel for you,
you'll know which one you need for each job!but you'll have that ability and luxury of being able to do that with both

-
Congrates on the purchases mate, you'll have to let us know how the toys measure up :)
-
Hi there,
I'll introduce my self just as my mother told me when I'm somewere new :) So, uhm, I'm Zepla from Holland. My native language is Dutch so excuse me if I make some spelling mistakes in English. Further details will follow down the road, I guess.
Furthermore and more interesting, I have a Leatherman New Wave and I Squird P4. I'm doing a mod on the squird at the moment that is not working out as planned. That's how I found out about this forum. And the least I can do is after reading lots of info about everything, joining the forum and perhaps I can help someone out.
Regards, Zepla
-
Welcome to the Forum mate, and there's nothing wrong with your english at all :)
-
Welcome to the Multitool forum zepla

Your english is very good, teach us Dutch ;)
-
Welcome aboard :) Don't worry your english is just fine!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login