Hints and Tips thread.
-
Perhaps we should have a thread of Hints and Tips that so many seem to need. A FAQ of sorts.
E.g. How do I...
Remove/replace scales?
Fix a warped scale?
Send my knife in for servicing?
Clean and Care For my knife?
Tell how old my knife is?
Find a labeled picture of an E-X-P-L-O-D-E-D SAK?What is...
This knife?
This tool?
The Average Lifespan Of A Red Shirt in TOS? ;)
The Ultimate Answer To Life, The Universe, And Everything?
The Airspeed Velocity Of An Unladen Swallow?Etc... Etc... Etc...
I'd be willing to spend some time on this, occasionally, but I can't modify my posts after a short period of time. Perhaps a Moderator could come up with something?
-
Forty-two.
Somebody had to do it :)
-
And you guys wonder why we don't make some threads stickies. ::) Nobody reads stickies. :ahhh
OK, here are a few.
Applying new scales: http://forum.multitool.or...ex.php/topic,12903.0.html
Multitool TLC: http://forum.multitool.or...dex.php/topic,1559.0.html
The Average Lifespan Of A Red Shirt in TOS? On an away mission? 10 minutes.
The Ultimate Answer To Life, The Universe, And Everything?
42, everyone knows that. ::)The Airspeed Velocity Of An Unladen Swallow?
African or European?And as for changing something. You can go to the main page of the forum, and on the bottom there is a list of all members currently online. Mods are blue. Pick one and sand a PM with your request. ;)
-
I'll throw one into the bowl that I haven't seen anywhere: get a plastic cotton swab stick (the hollow variety, usually the cheapos) or a coffee stir straw. Dip it into whatever oil that you use to lubricate your knife springs and cap one end with your finger. The size of the stick/straw is usually perfect for slipping into the gap between the spacers to get a drop or two of oil into the spring contact points. You can get the oil where it needs to go and not completely cover your knife in the stuff doing it.
-
And you guys wonder why we don't make some threads stickies. ::) Nobody reads stickies.
Problem is, I don't read stickies in other forums...
You should. There is a lot of useful info in other subforums, especially for SAKs in the Mod Squad.
AND of course the general forum rules..

-
African or European swallow?
-
And you guys wonder why we don't make some threads stickies. ::) Nobody reads stickies.
Problem is, I don't read stickies in other forums...
You should. There is a lot of useful info in other subforums, especially for SAKs in the Mod Squad.
AND of course the general forum rules..

Always read the stickies.
Most the time have even tried searching before I posted.
-
I'll play, PEN TRICK


-
Okay, a serious one...
I find that the brass rod I buy from the hobby shop is in a fairly soft if not annealed state.
Easy to peen, but not the strongest for pins.By putting it in the chuck of a cordless drill and bending it in a curve with the drill running, it work hardens the brass making for stiffer pins that wear less and don't swell all the way down when you peen the ends causing tight pivots.

This 1.6mm rod for 58mm SAKs I bend it through my fingers as it gives better "feel" for how much hardening is happening. Thicker rod I use a piece of wood with a hole drilled in it.
The rod will heat up as you work it so don't go burning yourself and blaming me!!
You can feel the difference, before working the rod can be bent easily but after it has some "spring" to it.
-
I stick the pen into the beak of the small pliers at a 90 degree angle, works well too.
-
A sewing needle is a good tool for removing unwanted crud in your knife. The tip will easily get the gunk out of the nail nicks and the tiny crevices; the head of the needle makes a good sideways scraper that won't scratch the knife up.
-
It would be nice, if someone with lots of free time could compile some of this great stuff. Unfortunately it takes forever sometimes to sift the jewels from the sand.
-
Are there any date codes on Victorinox & Wenger knives?
-
@Xelkos said:
Are there any date codes on Victorinox & Wenger knives?http://victorinox.saam007.com/91mmtools.php
http://www.e-webtechnologies.com/sak/Victorinox_Stampings___Trademarks_-_Update_12FEB08.pdf
-
Performance of the not-so-great wire stripper notch can be improved by opening the small knife blade and bottle-opener/screwdriver/wire-stripper at the same time. Pass the wire over the knife edge to partially score the insulation before putting it in the notch... then angle the blade to bend the wire and pull.
On most 91 mm models, these two blades are positioned together and it's easy to use them together.
-
NEVER! NEVER!! NEVER!!! Soak your SAK with it's standard red scales in rubbing alcohol... it appears they are sensitive to it.

I just used a 91% Isopropyl Alcohol to sterilize my knife, and my brand new scales now look like they were original to the knife (3 years), with a really nasty scrape. You can imagine right now I feel like a horse's... backside.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login