And so it begins.... (My adventures into Alox!)
-
I just fiddled this setup together. If you use the spacer of the nailfile on the phillips it's about the same width as caplifter and can opener combined. That is if you don't put a washer inbetween.
-
So... if I mess up a moderators mod do I get banned!?!?! :D :D :D
It went fine though so I'm safe! Peening done by request as it's for sure not my specialty. I'm satisfied though with the result. It does add a certain rustic feel. I have to say that I was pretty nervous swinging a hammer at an alox scale though! ;) My screw and pivot method is still much easier for me.







-
Beautiful! Thanks so much.
There will probably be a fairly large number of gratuitous Alox threads in the next few months. ;) :D
-
Mr W is the least likely to ban you when you mess it up.... he is the wise benevolent one :D
However, you didn't - it's gorgeous

-
I'm up-to-date again... and

Man; loved that green one, and the sailor mod. I'm still planing on having my special marlin spike mod done, and I need a couple simpler 84mm as well. Maybe I can get it all organized for next month. I have another idea as well I'm working on.
-
@Xelkos said:
Like that magnifying glass addition. What would you suggest, if anything, for the other side of a Wenger SI?And, can you put in a clockwise can opener in place of the Swisspaw version?
Well you can always put the phillips with the mag glass since they are the same width it's the easiest to do. I could make any other half length tool fit too though.
By clockwise opener you mean like one from a wenger? The claw? Ive never done it but I bet there is a way. I could always grind a custom spring to fit the pivot.
-
@Xelkos said:
Like that magnifying glass addition. What would you suggest, if anything, for the other side of a Wenger SI?
And, can you put in a clockwise can opener in place of the Swisspaw version?
Well you can always put the phillips with the mag glass since they are the same width it's the easiest to do. I could make any other half length tool fit too though.
By clockwise opener you mean like one from a wenger? The claw? Ive never done it but I bet there is a way. I could always grind a custom spring to fit the pivot.
Guess I can get used to this new can opener, besides it has other uses whereas the can opener I am used to would have less abilities. And makes for a great pistachio nut pry tool, and a smaller cut-off nipper.
I like the older magnifying glass. Am curious though, could an international/universal wrench be used on the other side? Or would that add too much weight?
-
I like the Wenger universal wrench too!
I have a wenger donor that has one and I will put it on an alox mod (or try) soon to see how it works out. I was surprised how well the wrench works on small bolts.
-
There are a few versions of it. Different teeth. The one I used to disassemble the LM Charge has PW2 like teeth. Looking forward to seeing what you do with it. What do you plan to put on the other side, Phillips? From a Wenger or Vic?

-
I love alligator wrenches. So simple, so clever, so effective. :)
-
Ah I didnt realize there were different versions. Not sure what one I have, I haven't ripped apart the donor yet. Phillips and wrench is what I'd like to do, either vic or wenger phillips, whatever works best.
-
I think the Vic phillips would be better. It's more precise than the Wenger which is to thick for most screws, and it would leave you with a gap, cause of it's short size.
-
Is there much of a difference between the Victorinox and Wenger versions of the wrench?

-
There is no Victorinox wrench if I'm not mistaken.
-
@crackout said:
There is no Victorinox wrench if I'm not mistaken.This photo is what confused me in thinking there was a Vic version, as that looks a lot like cellidor with a scale tool on the end. Must of been a modified Vic.

And looking at the image name can see it indeed was a Wenger accessory. Deceiving picture snippets.Edit: Had a connection issue there.
-
So I restocked on alox donors, but the darn things came all stuck together with these rivet things!


But... after about an hour they are much easier to use now. :D

A couple of tips for anyone trying to take apart alox SAKs. Two layer ones you need to drill out all 3 rivets, but solos and anything with a saw layer only 2 rivets. The spring with the open end like on the solo or the saw layer on a farmer just pulls out since its open, then you squeeze the scales together and use side cutters to cut the head of the now exposed rivet. Easy peasy.

Disclaimer: Many SAKs were harmed in the making of this post.
-
Gentlemen, we can rebuild them. We have the anodizing. We have the capability to build the world's finest alox knives. Syph007 will be the man. Better than they were before. Better tools, stronger coatings, faster builds.
-
Today on How It's Made...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
