And so it begins.... (My adventures into Alox!)
-
I'm up-to-date again... and

Man; loved that green one, and the sailor mod. I'm still planing on having my special marlin spike mod done, and I need a couple simpler 84mm as well. Maybe I can get it all organized for next month. I have another idea as well I'm working on.
-
@Xelkos said:
Like that magnifying glass addition. What would you suggest, if anything, for the other side of a Wenger SI?And, can you put in a clockwise can opener in place of the Swisspaw version?
Well you can always put the phillips with the mag glass since they are the same width it's the easiest to do. I could make any other half length tool fit too though.
By clockwise opener you mean like one from a wenger? The claw? Ive never done it but I bet there is a way. I could always grind a custom spring to fit the pivot.
-
@Xelkos said:
Like that magnifying glass addition. What would you suggest, if anything, for the other side of a Wenger SI?
And, can you put in a clockwise can opener in place of the Swisspaw version?
Well you can always put the phillips with the mag glass since they are the same width it's the easiest to do. I could make any other half length tool fit too though.
By clockwise opener you mean like one from a wenger? The claw? Ive never done it but I bet there is a way. I could always grind a custom spring to fit the pivot.
Guess I can get used to this new can opener, besides it has other uses whereas the can opener I am used to would have less abilities. And makes for a great pistachio nut pry tool, and a smaller cut-off nipper.
I like the older magnifying glass. Am curious though, could an international/universal wrench be used on the other side? Or would that add too much weight?
-
I like the Wenger universal wrench too!
I have a wenger donor that has one and I will put it on an alox mod (or try) soon to see how it works out. I was surprised how well the wrench works on small bolts.
-
There are a few versions of it. Different teeth. The one I used to disassemble the LM Charge has PW2 like teeth. Looking forward to seeing what you do with it. What do you plan to put on the other side, Phillips? From a Wenger or Vic?

-
I love alligator wrenches. So simple, so clever, so effective. :)
-
Ah I didnt realize there were different versions. Not sure what one I have, I haven't ripped apart the donor yet. Phillips and wrench is what I'd like to do, either vic or wenger phillips, whatever works best.
-
I think the Vic phillips would be better. It's more precise than the Wenger which is to thick for most screws, and it would leave you with a gap, cause of it's short size.
-
Is there much of a difference between the Victorinox and Wenger versions of the wrench?

-
There is no Victorinox wrench if I'm not mistaken.
-
@crackout said:
There is no Victorinox wrench if I'm not mistaken.This photo is what confused me in thinking there was a Vic version, as that looks a lot like cellidor with a scale tool on the end. Must of been a modified Vic.

And looking at the image name can see it indeed was a Wenger accessory. Deceiving picture snippets.Edit: Had a connection issue there.
-
So I restocked on alox donors, but the darn things came all stuck together with these rivet things!


But... after about an hour they are much easier to use now. :D

A couple of tips for anyone trying to take apart alox SAKs. Two layer ones you need to drill out all 3 rivets, but solos and anything with a saw layer only 2 rivets. The spring with the open end like on the solo or the saw layer on a farmer just pulls out since its open, then you squeeze the scales together and use side cutters to cut the head of the now exposed rivet. Easy peasy.

Disclaimer: Many SAKs were harmed in the making of this post.
-
Gentlemen, we can rebuild them. We have the anodizing. We have the capability to build the world's finest alox knives. Syph007 will be the man. Better than they were before. Better tools, stronger coatings, faster builds.
-
Today on How It's Made...
-
I'm curious. What do you do with all the stock liners? Do you use them in case nothing custom (brass, aluminum, ti) is desired?
Oh, and a little off-topic: Are the cellidor liners aluminum? If so, which alloy?

-
Yep cellidor liners are Aluminum. Really cheap grade, not sure which. I was thinking to try anodizing some to see how they would turn out to jazz up a 91 SAK. I use stock liners for mods too and for guides to make my custom liners. A stack of 5 stock liners is my router template guide, and they wear out after awhile.
I just got another run of black parts back today and I tried a new experiment.

I made some aluminum keyring/awl spacers and used fine aluminum rod stock to rivet them onto aluminum liners I made. The idea was that since its all aluminum it would all just anodize.
Well it mostly worked. The problem is you can see the liners are glossy looking but the spacer turned out more matte. The liners are 6061 and the other part was 7075 as thats all I could find in the right thickness.
They still might look ok with the orange scales, I'll have to see. I will make an effort to try to find some 6061 now though in the correct thickness for the next attempt with red liners.


-
If I understand correctly, you are making the anodization yourself ?
Would you have a pic of the setup you use ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
