Fixed Plier Multi-Tools
-
That's a fantastic set of pics and details - thank you for doing it

-
@Ombudsman said:
Don't know if you already have this one ?
It's a Cheapo, but this design caught my attention some time a ago because the hammer is in the solid handle instead of the moving one.


I did a sorta-write-up about that one a few years ago: </topic/18275 As I recall at the time we couldn't really figure out what it was intended for

-
Don't know if you already have this one ?

It's a Cheapo, but this design caught my attention some time a ago because the hammer is in the solid handle instead of the moving one.


I remember that Bob. They weren't on ebay long. When I read your post they were already off ebay. I did some searching today and found them on alibab, it requires a bulk order of 2 thousand units. It may be interesting to know they are listed as linesman multitools.
I did a sorta-write-up about that one a few years ago: </topic/18275 As I recall at the time we couldn't really figure out what it was intended for

-
Thanks guys and gals for all the nice comments.
I looked into the wichard tool. I am surprised. I thought it was a chepo tool but it isn't. It is made in France and the pliers are forged, not cast. That is rare for a Multi! It should make the small pliers fairly strong. -
Don't know if you already have this one ?

It's a Cheapo, but this design caught my attention some time a ago because the hammer is in the solid handle instead of the moving one.

I did a sorta-write-up about that one a few years ago: </topic/18275 As I recall at the time we couldn't really figure out what it was intended for

That's where I saw it !
Remember having seen it somewhere 
-
@scrappy said:
Thanks guys and gals for all the nice comments.
I looked into the wichard tool. I am surprised. I thought it was a chepo tool but it isn't. It is made in France and the pliers are forged, not cast. That is rare for a Multi! It should make the small pliers fairly strong.Thanks for the info scrappy - I had no idea they were forged. Makes me feel a lot better about how much I paid for it :P :P
-
50ft-trad,
They are expensive huh? I think I am going to get one. Glad to know I not they only one who thought it was pricey. -
Cool post
I've only 2 both like your shefield large and small both handy tools with solid pliers but not so great phillips . -
@scrappy said:
50ft-trad,
They are expensive huh? I think I am going to get one. Glad to know I not they only one who thought it was pricey.I'm only seeing them in chandlers at the moment this side of the puddle, and prices ranging from £56 (nett) up to nearly £70. When you consider all you get is a (OLD style) can opener, cap lifter, combo edged blade and a pair of slip joint pliers - that's a lot of pennies :ahhh (thankfully I fell lucky a while back and did a bit better). What prices are you seeing?
-
Don't know if you already have this one ?

It's a Cheapo, but this design caught my attention some time a ago because the hammer is in the solid handle instead of the moving one.


I remember that Bob. They weren't on ebay long. When I read your post they were already off ebay. I did some searching today and found them on alibab, it requires a bulk order of 2 thousand units. It may be interesting to know they are listed as linesman multitools.
I did a sorta-write-up about that one a few years ago: </topic/18275 As I recall at the time we couldn't really figure out what it was intended for

Is that the one that was being sold on eBay as a Gerber?
Oh, and don't forget the predecessor to the Witchard, the Michelin Depanneur. It is a very well made tool and, when you can find them can often be picked up for a song as not many people seem to know about them.

Def
-
Yep, and in between the old Le Depanneur tool and the current Wichard tool, there was the Au Sabot X2:

-
Nice! I haven't seen that one before!
Def
Sent from my Motorola Atrix digital multitool.
-
Wow def, your tool has three slip joint positions. I bet it opens wide.
Does the wichard tool have three positions?50ft-trad
I found two retailers. One for 127 and the other for 97. I had a coupon and paid 82. Which is 49.2 pounds. -
Yep, and in between the old Le Depanneur tool and the current Wichard tool, there was the Au Sabot X2:

Nice pic bob!
Not actually my picture, but thanks anyway! :D
I don't have mine available at the moment, but I'm pretty sure the Wichard has two different slip joint positions, as opposed to three on the Le Dep.

By the way, while you are searching for Wichard tools keep your eye out for the glow-in-the-dark version. 8)


-
HandyBoy belonged to my father he carried one while in Korea.
Slip joint pliers, adjustable wrench
screwdriver / pry bar.I saw a complete set once it came with a leather sheath with a fix blade and a marlin spike about 4 inches.
DRAWER QUEEN NOW.





-
That's an oldy and a goody Aaron!

-
Thanks. Every now and then I think about taking it out for a spin but decide against it.
-
@scrappy said:
Wow def, your tool has three slip joint positions. I bet it opens wide.
Does the wichard tool have three positions?50ft-trad
I found two retailers. One for 127 and the other for 97. I had a coupon and paid 82. Which is 49.2 pounds.Yup, it's got a hell of a jaw on it. I'll measure it when I get a moment, but I daresay it's capable of handling bolts much too large for bare hands to manage so I'm not sure it's really that useful if you get my drift.
@Swiss Man said:
Thanks. Every now and then I think about taking it out for a spin but decide against it.Keep that sucker safe! While you'd probably never break it, it would be a terrible shame to lose it or have it stolen. That beautiful piece has earned a comfortable retirement.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login